Swap meet...

[RandyMac]

I have this stuff, I don't know what they are off of, no chips or cracks, showing some wear. The bars are good, one has the tip replaced, they are straight, rails are good.
I need a muffler and guard for a Stihl 051, could also use a couple loops of 404 for a 24" hardnose bar, I'll try to figure out dl count.

 

[mowoodchopper]

I have a nice little dog, he is a pekineses pomeranian mix. Is scared of the rain and likes to climb out of the fence!
I would trade him for most any saw! You'll have to pick him up though.
I would even take a stihl! :greenchainsaw::greenchainsaw:

 

[yooper]

I will take the dog in trade for my very used fanno, I will even throw in a very used sheath. ...........If I pack it all in a very large glass jar, will you ship the doggy back to me into it?

 

[rupedoggy]

Those bars look like they are off you 051 or 075. What is the slot width in MMs? I probably have the muffler and guard you need. I live near Placerville if that is close for you. Mike 530 677 2842

 

[mowoodchopper]

I will take the dog in trade for my very used fanno, I will even throw in a very used sheath. ...........If I pack it all in a very large glass jar, will you ship the doggy back to me into it?

I will have to ask my wife, its her dog!

 

[Brownpot Deaton]

randy mac, what length and chain type are those bars??? im looking for a roller nose 3/8's to go on my 880 and if those fit the 051/075 then they will have the same bar mount.

jordan
832-671-0220

 

[fredmc]

How about one 61?
View attachment 101404

View attachment 101401

View attachment 101402

View attachment 101403

nice saw

 

[gilraine]

Looking to trade an old stihl 020av top handle in very good condition for a new 25' stihl es bar and with 2 new rsc or rmc chains.

i can trade you a 28 inch es bar and 2 chains...i don't have a 25

 

[chainsawwhisperer]

I'm looking for a chain guard/ brake assembly, for a Mac 10-10.
CSW

 

[fredmc]

I'm looking for a chain guard/ brake assembly, for a Mac 10-10.
CSW

I have one but the brake handle is broke-still works, I also have a decent mac 10-10 rh start with nice paint.

 

[Saw Dr.]

XL-12 tank / HS-74 Piston

I need a blue oil tank for a very early XL-12 I'm repairing for a guy. I have red ones already, but I REALLY can't paint. There is a puncture wound on the original. Saw is very nice, and I want to keep it looking original.

Also need a new or good used 33mm piston for any FC/FS/BG/HS 72, 74, or 76 It will be 4133 034 0500 for complete, or 4133 030 2000 for bare piston. OR someone in the NE willing to check with their dealer on OEM, and ship it to me. The distributor down here is out of them.

I have a few boxes of older NOS Stihl stuff for trading stock, lots of 290 parts, and who knows what else.

 

[blsnelling]

I need a carb for a Husky 357 or 359. Walbro HDA 198 or 199.

 

[Cantdog]

I need a blue oil tank for a very early XL-12 I'm repairing for a guy. I have red ones already, but I REALLY can't paint. There is a puncture wound on the original. Saw is very nice, and I want to keep it looking original.

Also need a new or good used 33mm piston for any FC/FS/BG/HS 72, 74, or 76 It will be 4133 034 0500 for complete, or 4133 030 2000 for bare piston. OR someone in the NE willing to check with their dealer on OEM, and ship it to me. The distributor down here is out of them.

I have a few boxes of older NOS Stihl stuff for trading stock, lots of 290 parts, and who knows what else.

Do you need the top fill or he bottom fill?

 

[valekbrothers]

Husqvarna 261

I have a good running 261 for trade...........
Everything works as it should. I replaced the brake band less than a year ago.
It has a 20" bar with 3/8" .050 72dl chain.

More pics below......



LOOKING FOR:

42" or 48" Large mount Husqvarna bar for 3/8" chain,
Muffler and outside dawg for a Husqvarna 394.

PM me any questions or let me know what you have to trade.

Thank you,
Chuck

 

[fredmc]

I have a good running 261 for trade...........
Everything works as it should. I replaced the brake band less than a year ago.
It has a 20" bar with 3/8" .050 72dl chain.

More pics below......



LOOKING FOR:

42" or 48" Large mount Husqvarna bar for 3/8" chain,
Muffler and outside dawg for a Husqvarna 394.

PM me any questions or let me know what you have to trade.

Thank you,
Chuck

I wish I had what you wanted. I want a 261 to make a 262. I have cylinder for a 395.

 

[sefh3]

I have a good running 261 for trade...........
Everything works as it should. I replaced the brake band less than a year ago.
It has a 20" bar with 3/8" .050 72dl chain.

More pics below......



LOOKING FOR:

42" or 48" Large mount Husqvarna bar for 3/8" chain,
Muffler and outside dawg for a Husqvarna 394.

PM me any questions or let me know what you have to trade.

Thank you,
Chuck

I don't have what your looking for but how much would you take for that?

 

[valekbrothers]

I don't have what your looking for but how much would you take for that?

I would like $225 for it.

 

[blsnelling]

I hate to be a ney sayer. But if the admins see this thread being used in place of the Tradin' Post, they're likely to take it down. I'd recommend keeping offers to buy and references to selling to PMs. I'd hate to see this thread go away.

 

[sefh3]

Good point Brad. My bad. I'll PM next time.

 

[blsnelling]

Good point Brad. My bad. I'll PM next time.

No biggie. I'm not a moderator here. I just know what I've seen and don't want to see a good thing go away.