Swap meet...

[SawGarage]

BOB!

I see you down there! lol

 

[o8f150]

does anyone have an 8t rim sprocket for my 361 that they would like to get rid of. its 3/8 pitch. i have some green left after i got gas today

 

[SawGarage]

Looking for an air box cover, air filter, and a tank for an 038. Clutch cover would be great as well.
Thanks
John

John,

I MIGHT have a NOS filter, if no-one else does... gotta go digging though...

I might have a spare clutch cover as well.. (I know I have a NOS 'made in west Germany' cover. )

PM sent...

 

[rupedoggy]

Thanks Jonathan A guy can never have to many 090s but in case someone does not have one for trade, I gave the $15 option. Mike

 

[DSS]

does anyone have an 8t rim sprocket for my 361 that they would like to get rid of. its 3/8 pitch. i have some green left after i got gas today

I wouldn't mix a used rim with a different used chain.

A new 8 pin rim is like 5 bucks.

 

[Duke Thieroff]

Looking to change some of my Macs over to Tilly HLs, could use an HL 63 and a 101, I believe.



Got stuff to trade possibly.


Chris

 

[vw_motorsports]

Anyone have a case for a poulan pro 330, cracked case where the stud pulled out.


please pm
thanks

 

[o8f150]

I wouldn't mix a used rim with a different used chain.

A new 8 pin rim is like 5 bucks.

i have looked all over the net and no luck,,i will call my dealer and see about getting 1.. i don't know if i would run it all the time i just mainly wanted 1 to experiment with,, but i do agree about getting a new one,,, the saw still looks new so might as well get a new rim

 

[DSS]

i have looked all over the net and no luck,,i will call my dealer and see about getting 1.. i don't know if i would run it all the time i just mainly wanted 1 to experiment with,, but i do agree about getting a new one,,, the saw still looks new so might as well get a new rim

Bailey's - Oregon Power Mate Rim 375 x 8 Tooth

 

[jimbo1490]

Looking for an air box cover, air filter, and a tank for an 038. Clutch cover would be great as well.
Thanks
John

I've got the AF cover. My cover has no screw in it. There are two different types of attach methods for the cover: simple screw (like an 028) and 1/4 turn latch. The simple screw ones are easy to find and either one is not too expensive at the dealer. The clutch cover is usually that same as an 028(got one), unless the big he-man style cover is desired.

Jimbo

 

[o8f150]

Bailey's - Oregon Power Mate Rim 375 x 8 Tooth

thanks for that info

 

[atpchas]

Need/want some Jonny 49SP parts

I need an outer guide plate and want a hand guard, a couple spark plug guards, and 2-3 air filter cover knobs for Jonsered 49SP. I have some Jred and Stihl parts or green to exchange.

 

[rupedoggy]

Hey Charlie do you want a 240 Homelite? Cheap! Mike

 

[tbone75]

350 Husky

Looking for a heat shield for a 350 husky.The part that goes about a 1/4 way around the muffler.Got some cheap poulan parts & some XL2 parts.And a little 320 Mac parts.Or some moldy green stuff.

 

[Eccentric]

Looking to change some of my Macs over to Tilly HLs, could use an HL 63 and a 101, I believe.

Got stuff to trade possibly.


Chris

The McCulloch HL's I know of are HL19, HL103, and HL63. Suffix's for those carbs I've seen so far are 'E', 'F', 'G', 'A', and 'B' (as in HL19B). I could use a couple more of those too...

 

[MnSam]

I have a 36" nice husqvarna bar, one new chain , and one lightly used chain. Looking to trade for a similar setup in 24"-ish.

 

[Duke Thieroff]

The McCulloch HL's I know of are HL19, HL103, and HL63. Suffix's for those carbs I've seen so far are 'E', 'F', 'G', 'A', and 'B' (as in HL19B). I could use a couple more of those too...

Hey!

You stay out of this!

I'm the guy looking for HLs!




Chris

 

[thomas1]

I need an outer guide plate and want a hand guard, a couple spark plug guards, and 2-3 air filter cover knobs for Jonsered 49SP. I have some Jred and Stihl parts or green to exchange.

Charlie,

Did everything make it ok?

 

[vw_motorsports]

I have a 36" nice husqvarna bar, one new chain , and one lightly used chain. Looking to trade for a similar setup in 24"-ish.

pm sent

 

[Warped5]

Mac 610/650/Timber Bear part needed

Hey guys .... looking for a clean (w complete logo) airbox cover for a Pro Mac 610/650/Timber Bear ..... Please PM me with pix .... I have some assorted parts for same saws to trade or green paper sheets. Thanks!