Swap meet...

[leiterch]

pro saw

looking for a pro saw 90cc+. Also a 24 - 28 bar/chain for a 372. pm me with what you have.

thanks

 

[jbighump]

i need a oil pump and a good top cover for an 026 non pro

 

[450rider]

Does anyone have a ms260 tank housing for trade or sale? I don't have alot of saw parts but i do have $$$$$$.

 

[Motodeficient]

I have a new aftermarket husky 61 cylinder cover. May fit other models.. Also have a pioneer P20 I would sell cheap. It runs, thats all I really know about it.

 

[Bill G]

looking for a pro saw 90cc+. Also a 24 - 28 bar/chain for a 372. pm me with what you have.

thanks

I have plenty of big saws. Narrow it down

 

[fredmc]

If I remember right the 61 is a big cylinder. What do you have in the line of 395 parts. What I have in mind is a 394 with a bad cylinder and piston. But, in order to switch it over to a 395 set up you need the cylinder intake mount and carb from a 395.
Thanks
Bob

I got all of that too.

 

[fredmc]

Still need a clutch, oil pump worm gear, and a coil for an 029 stihl. Got lots to trade.

parts from:
285cd
288
020 stihl
husky 61
66
268xp

 

[super3]

In need of a flywheel for a 262xp
Anyone know if there is a cross reference for husky parts?

 

[Madsaw]

Still need a clutch, oil pump worm gear, and a coil for an 029 stihl. Got lots to trade.

parts from:
285cd
288
020 stihl
husky 61
66
268xp

PM me you email addy and I will get teh pics to you in the next day or 2 of these parts.
Bob

 

[bowtechmadman]

I have an 041AV w/ 18" bar/chain in good condition, runs/cuts/oils as it should...missing inner felling spike. Interested in Husky's, J-red, Partner, Dolmar, Redmax, Shinndiawa 50cc area.

 

[Harzack223]

looking for 25in bar

Looking for a stihl 25" bar in good condition or new.

I have some 025 and ms290 parts saws as well as some other odds and ends things.

both saws have scored pistons and cylinders.

 

[cbolyard]

I need MS460 parts: oiler, stock 3/4 wrap handle. Also looking for 3/4 wrap and long clutch cover for my 044. And lastly an 026/260 parts saw to rebuild for my dad.
I should have some 044 parts soon to offer as trade (complete saw, toasted piston/cyl) unless I decide I'm gonna rebuild that one

 

[sefh3]

Looking for a stihl 25" bar in good condition or new.

I have some 025 and ms290 parts saws as well as some other odds and ends things.

I think I have a bar. I'll check tonight. I'm looking for a piston and cylinder for a MS290.

 

[Bowtie]

Looking for a clutch cover for an 028 Super, a 25"-36" 3/8 bar for an 066, and still trying to find a good 46mm 028 Super cylinder.

I have all kinds of Stihl parts to trade.

 

[fredmc]

need:
029 clutch, piston, coil and worm gear

268 xp cylinder and piston


got lots to trade

 

[sefh3]

I'm looking for a 30"-32" bar for my 056. Let me know what you have and what your looking for.

 

[cbolyard]

I also need some small parts for the 460: the washer that goes between the clutch and oiler, the washer that goes over the rim sprocket, e-clip for rim sprocket, screw that hold the plate over the tensioner down, handlebar screws, one screw and 2 of the brass grommets from the top cover.

 

[litefoot]

I picked up an 044 project saw. Piston is scored. Cylinder looks like it is salvageable. It has spark. Plastic is not cracked, but it is faded. Trade for good condition 25-28" Stihl bar/chain combo (3/8 .050).

 

[blsnelling]

I picked up an 044 project saw. Piston is scored. Cylinder looks like it is salvageable. It has spark. Plastic is not cracked, but it is faded. Trade for good condition 25-28" Stihl bar/chain combo (3/8 .050).

PM sent. I've got a brand new GB 24" bar. It's branded Frost Bite becaus of the cyro treated rails. I'll through in a once sharpend Stihl RSC chain too.

 

[epicklein22]

Litefoot, I got a nice stihl bar (near new) and chain (new) combo if you don't go with Brad.