dustytools
Addicted to ArboristSite
Im looking for a chain brake handle and the mounting screw that goes throught it and the re-coil cover for a 371 if anyone has an extra. I dont have much to swap but Im sure I could come up with something. Thanks.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Trigger-Time
Addicted to ArboristSite
DT, I think 362, 265, and 372 re-coil cover (starter) will also work.
dustytools
Addicted to ArboristSite
Yes they will. I dont need the recoil cover though, just the screw that holds the chain brake, it actually holds the recoil cover too.
deezlfan
Meadow River Lumber Co. 6
Wanted: Standard front handle and complete clutch cover/brake assy for Jonsered 625 II.
Bowtie
Gearhead
Stihl 028 Super Cylinder
Need a cylinder (46mm). Can use the cylinder only or both P/C.
Need a cylinder (46mm). Can use the cylinder only or both P/C.
MS460WOODCHUCK
Addicted to ArboristSite
I'm looking to get rid of a few saws. I just can't use them all and it drives me nuts watching them sit! I have a 192tc with 12'' picco. It has had 7 tanks of fuel and STIHL under warranty. Just don't need a bucket saw. I also have a ms270 that the muffler has been opened up a bit and carb retuned it runs very good. It is running a 20'' .325 bar and chain. This saw has had 8-10 tanks of fuel and is STIHL under warranty. Now for the 1 that is really going to make me sick is the MS660 with 28'' bar and chain. This saw has had 6 tanks of fuel and is STIHL under warranty. I hate comming off of any of these saws but I can't use them all
All of these saws are just like new.
All of these saws are just like new.
I'm looking to get rid of a few saws. I just can't use them all and it drives me nuts watching them sit! I have a 192tc with 12'' picco. It has had 7 tanks of fuel and STIHL under warranty. Just don't need a bucket saw. I also have a ms270 that the muffler has been opened up a bit and carb retuned it runs very good. It is running a 20'' .325 bar and chain. This saw has had 8-10 tanks of fuel and is STIHL under warranty. Now for the 1 that is really going to make me sick is the MS660 with 28'' bar and chain. This saw has had 6 tanks of fuel and is STIHL under warranty. I hate comming off of any of these saws but I can't use them all
CAD Gone Wild? Wife got the bill, LOL?
MS460WOODCHUCK
Addicted to ArboristSite
My wife of 15 yrs has never worked and does'nt even look at the bills. Can't take them all to the woods or there won't be any room for the wood!
My wife of 15 yrs has never worked and does'nt even look at the bills. Can't take them all to the woods or there won't be any room for the wood!
Just messin' with you. My wife has told me I need an accountant for my saw stuff. I told her I do!
As many saws as I buy and sell, she can't keep track of me, lol.
MS460WOODCHUCK
Addicted to ArboristSite
Just messin' with you. My wife has told me I need an accountant for my saw stuff. I told her I do!
It honestly gets crazy does'nt it Brad.
To tell you the truth Brad I am on the market for a slightly used MS260 
sefh3
Addicted to ArboristSite
I'm looking to get rid of a few saws. I just can't use them all and it drives me nuts watching them sit! I have a 192tc with 12'' picco. It has had 7 tanks of fuel and STIHL under warranty. Just don't need a bucket saw. I also have a ms270 that the muffler has been opened up a bit and carb retuned it runs very good. It is running a 20'' .325 bar and chain. This saw has had 8-10 tanks of fuel and is STIHL under warranty. Now for the 1 that is really going to make me sick is the MS660 with 28'' bar and chain. This saw has had 6 tanks of fuel and is STIHL under warranty. I hate comming off of any of these saws but I can't use them all
What are you looking to trade for? I want the MS660.
Work Saw Collector
GTG Coffee Maker
It honestly gets crazy does'nt it Brad.
#### I just gave away a rebuilt 026 I would have put some with on the 660.
MS460WOODCHUCK
Addicted to ArboristSite
A really nice ms260 and some too boot.
Brownpot Deaton
ArboristSite Operative
possible trade with money???
have a brand new, used for less than 10 cuts, 36" stihl duromatic bar for a large stihl mount . was origonally for my ms 880 to replace the 404 sprocket nose 36 stihl bar that came with it and had a decent chunk missing from the railing, but dont like it that much( bought it in a hurry). would be willing to trade for similar size if it's 3/8's sprocket.
have a brand new, used for less than 10 cuts, 36" stihl duromatic bar for a large stihl mount . was origonally for my ms 880 to replace the 404 sprocket nose 36 stihl bar that came with it and had a decent chunk missing from the railing, but dont like it that much( bought it in a hurry). would be willing to trade for similar size if it's 3/8's sprocket.
mrowens33
ArboristSite Member
Ms 260
http://milwaukee.craigslist.org/tls/1219524402.html
Stihl Chain Saw - $400(Franklin)
--------------------------------------------------------------------------------
Reply to: [email protected] [Errors when replying to ads?]
Date: 2009-06-13, 9:51AM CDT
I have a brand new stihl chain saw. Used to cut down one tree. Do not need any more.
Bigger saw with 18"Bar. This saw really rips and cuts clean.
Jay
414 517-5342
Location: Franklin
it's NOT ok to contact this poster with services or other commercial interests
Here is a Craigslist posting in my area. I e-mailed this guy and he said its a MS260. He is asking a little too much for it I think. He has had it on here for a few weeksIt honestly gets crazy does'nt it Brad.
http://milwaukee.craigslist.org/tls/1219524402.html
Stihl Chain Saw - $400(Franklin)
--------------------------------------------------------------------------------
Reply to: [email protected] [Errors when replying to ads?]
Date: 2009-06-13, 9:51AM CDT
I have a brand new stihl chain saw. Used to cut down one tree. Do not need any more.
Bigger saw with 18"Bar. This saw really rips and cuts clean.
Jay
414 517-5342
Location: Franklin
it's NOT ok to contact this poster with services or other commercial interests
MS460WOODCHUCK
Addicted to ArboristSite
The 270 that I listed yesterday"
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view¤t=saws004-1.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws004-1.jpg" border="0" alt="Photobucket"></a>
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view¤t=saws004-1.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws004-1.jpg" border="0" alt="Photobucket"></a>
MS460WOODCHUCK
Addicted to ArboristSite
The 660:
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view¤t=saws005.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws005.jpg" border="0" alt="Photobucket"></a>
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view¤t=saws005.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws005.jpg" border="0" alt="Photobucket"></a>
MS460WOODCHUCK
Addicted to ArboristSite
The 192tc:
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view¤t=saws003-1.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws003-1.jpg" border="0" alt="Photobucket"></a>
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view¤t=saws003-1.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws003-1.jpg" border="0" alt="Photobucket"></a>
I have 2 oregon clutch drums brand new in boxes. They are both rim sprocket drums. The first one fits a 026, and is oregon part number 32457. I'm sure it fits other saws, you'll have to check on Oregons website.
The second clutch drum is for a 017, 018, 019, 021, 023, or 025.
I have (5) 3/8 - 7 rim sprockets, and (1 or 2) .325 - 7.
All of these rims are Oregon SM 7 size (Link HERE The Oregon SM-7 rim only fits on Oregon Drums. They will fit both of the drums listed above.)
Let me know what you want, and what you have. I'm always game for bars and or chains for Stihl. I also need a good air filter for a 026 (non-pro).
The second clutch drum is for a 017, 018, 019, 021, 023, or 025.
I have (5) 3/8 - 7 rim sprockets, and (1 or 2) .325 - 7.
All of these rims are Oregon SM 7 size (Link HERE The Oregon SM-7 rim only fits on Oregon Drums. They will fit both of the drums listed above.)
Let me know what you want, and what you have. I'm always game for bars and or chains for Stihl. I also need a good air filter for a 026 (non-pro).
Last edited:
Bowtie
Gearhead
I need a carb for an FS 36 strimmer. Walbro WT 160B
