Swap meet...

[SawGarage]

Anyone have a Husky 350 parts saw? I need two screws for the recoil cover .... thanks!

I may have what you need. Give me PM on length of them that you need. If correct, you need allen/hex head metric screws. Wrench to fit them would be 4mm. I have tried to watch hardware store closeouts and sales and stockpile those things. Handy and cheaper than ordering OEM.

Those screws are actually a plastic thread screw... I think

check the part # IPL's from the 350- 346....

on that note...

IF ANYONE needs socket-head cap screws (is what the allen-headed screws are called..) PLEASE let me know...

my local LARGE worldwide industrial supplier has FOUR floors of fasteners (ever see what a 60mm cap screw looks like ??? )

I've picked up screws for mere pennies a piece.


sure as HECK beats tru-value @ $1.25 ea for 268, etc recoil screws...

 

[SawGarage]

From Spike (Bob) himself....


http://www.arboristsite.com/chainsaw/177245-3.htm#post3071130

 

[ChainsawmanXX]

Hey ya'll I have 2 P&C to get rid of.
Xl12 Piston and cylinder looks good, no scoring needs rings.
Super XL "Dido"

 

[sixgun_slim]

I need felling dogs for a Jonsered 90 and an air box cover for a stihl 031 I don't much saw stuff to trade but I have some northeast hard cast 45-70 bullets, .38-55 bullets and some .45 cal round balls, and always some dead presidents if they will work.

Thanks

Sixgun

 

[Eccentric]

Hey ya'll I have 2 P&C to get rid of.
Xl12 Piston and cylinder looks good, no scoring needs rings.
Super XL "Dito"

Dammit Jacob. You keep coming up with more things I want/need. Don't have anything to offer you though. Now those P/C's are added to 'the list' along with the E-Z with the 'custom' starter handle....:msp_unsure:

 

[Mastermind]

I need felling dogs for a Jonsered 90 and an air box cover for a stihl 031 I don't much saw stuff to trade but I have some northeast hard cast 45-70 bullets, .38-55 bullets and some .45 cal round balls, and always some dead presidents if they will work.

Thanks

Sixgun

I have the air box cover. Send me a PM.

 

[SawGarage]

Dammit Jacob. You keep coming up with more things I want/need. Don't have anything to offer you though. Now those P/C's are added to 'the list' along with the E-Z with the 'custom' starter handle....:msp_unsure:

NOTHING?!?!?!? Surely you can't be serious... :monkey:



Sixgun, is it possible you called me on parts for your J-red before? I'm right outside worcester .... :dunno:

If you don't have luck, I should have a spare inner spike. I'm not aware if an outer was available..

J

 

[Mastermind]

NOTHING?!?!?!? Surely you can't be serious... :monkey:



Sixgun, is it possible you called me on parts for your J-red before? I'm right outside worcester .... unno:

If you don't have luck, I should have a spare inner spike. I'm not aware if an outer was available..

J

We need to talk 044 parts...

 

[Eccentric]

NOTHING?!?!?!? Surely you can't be serious... :monkey:

J

I am serious.........................and don't call me Shirley.:jester:

Well......nothing that he'd want for 'em that I'd be willing to part with methinks. Maybe I'm wrong. Whatcha looking for in exchange for the 'custom' E-Z and those good used P/C sets Jacob?

 

[sixgun_slim]

J

No I got the saw a couple of years ago from my neighbor and I haven't had any issues with it. I didn't even notice it didn't have the dogs till trying to knock down some big sugar maples it's hard without the dogs send me a pm with what ud take for them. I will keep in mind u have parts

Sixgun

 

[tomdcoker]

029 Stihl

I need a chain brake handle for the above saw. Got parts or paypal. P M me if you have one for sale. Tom

 

[o8f150]

i need a few parts for teh 029 super i just got.. i need a muffler (3 bolts holding it),,2 muffler bolts with nuts,,, 1 bar nut,, and maybe an air filter,,,, i have some parts to trade and cash,,,,,, thanks guys,,,,
on another note,,,thanks to tbone for teh idle screw he sent me

 

[67L36Driver]

Hey ya'll I have 2 P&C to get rid of.
Xl12 Piston and cylinder looks good, no scoring needs rings.
Super XL "Dido"

Ummmmmmm. Don't those come under the heading of "Parts you will need somday".

Just thinking out loud here.
Carl.

 

[Eccentric]

Ummmmmmm. Don't those come under the heading of "Parts you will need somday".

Just thinking out loud here.
Carl.

Shhhhhhhhhhhhh Carl. He's a bright young lad. Let him figure it out on his own. In the mean time..........................:cool2:

 

[vw_motorsports]

HUsky 455 rancher 460

Looking for parts for a 455 rancher, just a couple of small things

clutch
clutch cover
spur sprocket w/bearing
top cover
front handle
air filter

I think that's it :msp_rolleyes:

please PM

 

[o8f150]

i need a few parts for teh 029 super i just got.. i need a muffler (3 bolts holding it),,2 muffler bolts with nuts,,, 1 bar nut,, and maybe an air filter,,,, i have some parts to trade and cash,,,,,, thanks guys,,,,
on another note,,,thanks to tbone for teh idle screw he sent me

i found that the ms-290 and ms-310 is the same muffler,,,ANY ONE HAVE IT!!

 

[sefh3]

i found that the ms-290 and ms-310 is the same muffler,,,ANY ONE HAVE IT!!

The are basically the same saw. CC is about it. I might have an extra muffler. I'll check tomorrow night for you. What is wrong with yours? It looked ok in the picture on your thread.

 

[o8f150]

The are basically the same saw. CC is about it. I might have an extra muffler. I'll check tomorrow night for you. What is wrong with yours? It looked ok in the picture on your thread.

who ever owned it couldn't get the nuts loose so they tried to cut the muffler off,,so there is a big hole around the top left bolt hole,,, when i took teh muffler off i just cranked on the bolts and broke 2 of them off
thanks sefh

 

[SawGarage]

We need to talk 044 parts...

sent ya an email

i need a few parts for teh 029 super i just got.. i need a muffler (3 bolts holding it),,2 muffler bolts with nuts,,, 1 bar nut,, and maybe an air filter,,,, i have some parts to trade and cash,,,,,, thanks guys,,,,
on another note,,,thanks to tbone for teh idle screw he sent me

sent YOU a PM (I'm not sure we communicated VIA email... couldn't find a DARN thing

Shhhhhhhhhhhhh Carl. He's a bright young lad. Let him figure it out on his own. In the mean time..........................:cool2:

a BIRDIE MIGHT have found him a reason, or a suggestion as to a saw he could use it in :monkey:


J

 

[Mastermind]

sent ya an email



sent YOU a PM (I'm not sure we communicated VIA email... couldn't find a DARN thing





a BIRDIE MIGHT have found him a reason, or a suggestion as to a saw he could use it in :monkey:


J

I ain't seeing it my friend.