Swap meet...

[cjcocn]

Looking for an electronic ignition for a Dolmar 123 (or a source if they can still be purchased?).

Thanks

 

[cleaf30]

Thanks Stihlguitar for the offer but mine doesn't have points.

 

[Harzack223]

Looking for an 044 or an 066 if it needs work that's ok but not looking for a parts saw. have some smaller stihl parts and cash.

 

[john taliaferro]

88

i need a clutch cover and rubber for 88

 

[StihlGuitar]

044

Listing before all goes to ebay.

Have a 044 in pieces, all good except a clutch side crank bearing got little movement. Kept throwing out the seal. Non HD, arctic, flywheel lost one fin, have a regular flywheel to goes with it too. Minus the cylinder and piston. The coil is gone but I have one off 024 that works

046 BB kit, ported and slotted to run on 044. about 5 tanks through it.

024 clutch, oil pump, chain brake, case, needs cleaning, flywheel, dawg, and recoil (small crack but functional)

I can take pics, looking for a bigger saw project or husky mid size project.

PM me for trade or purchase of 044 and 046 BB kit.

 

[StihlGuitar]

Listing before all goes to ebay.

Have a 044 in pieces, all good except a clutch side crank bearing got little movement. Kept throwing out the seal. Non HD, arctic, flywheel lost one fin, have a regular flywheel to goes with it too. Minus the cylinder and piston. The coil is gone but I have one off 024 that works

046 BB kit, ported and slotted to run on 044. about 5 tanks through it.

024 clutch, oil pump, chain brake, case, needs cleaning, flywheel, dawg, and recoil (small crack but functional)

I can take pics, looking for a bigger saw project or husky mid size project.

oops.. I just clicked on me email message to see new messages in Swap Meet and it went straight to your message, thought it was new...didn't see it was from Feb. lol.. Sorry about that.

 

[mowoodchopper]

If anyone is interested in a super nice 5100 I have one I might part with.
The only reason I would let it go is I want another 60cc saw. It doesn't have alot of hours on it and has been taken perfect care of and always ran on the rich side.

If you have a saw you want to trade or an offer pm me.

 

[2000ssm6]

PM me for trade or purchase of 044 and 046 BB kit.

P&C kits or saws?

 

[hanniedog]

Anyone interested in a McCulloch Pro Mac 800, has full wrap and 24" bar. Am looking for a 262xp or a 254.

 

[Wildman1024]

Homelite c-9 optional oiler

Looking for the optional automatic oiler clutch cover for a homelite c-9/c-91. If anyone has one or knows where I can get one please let me know

 

[Harzack223]

28in bar

I'm looking for a 28 inch bar for a stihl 064 I recently picked up. have some smaller stihl parts and cash to trade.

 

[jbighump]

i am looking for a brake handle for an 026 stihl

 

[pinemartin]

I am entertaining the idea of trading off my husky 395 that JacobJ had recently built for something just as big but more comfortable to run. The 395 only has 1 1/2 tanks run through it, the saw has been completely rebuilt with new bearings, seals, a 2101 pop up piston and port work. While this saw runs and cuts great it is just not for me. What I am looking for is a high cc saw with a strait handlebar like a stihl 064-084 or jonsered 2171-2095 in good running condition. I will entertain all offers and will trade only sorry no cash offers. Pictures included....

 

[parrisw]

I am entertaining the idea of trading off my husky 395 that JacobJ had recently built for something just as big but more comfortable to run. The 395 only has 1 1/2 tanks run through it, the saw has been completely rebuilt with new bearings, seals, a 2101 pop up piston and port work. While this saw runs and cuts great it is just not for me. What I am looking for is a high cc saw with a strait handlebar like a stihl 064-084 or jonsered 2171-2095 in good running condition. I will entertain all offers and will trade only sorry no cash offers. Pictures included....

Try a full wrap on it, you'll like it better!!! Don't think I'd like my 394's or 395 with half wrap.

 

[Brushwacker]

I'm looking for a 28 inch bar for a stihl 064 I recently picked up. have some smaller stihl parts and cash to trade.

I have an Oregon powermate 58 gauge 28" bar that I used on a Makita 6401, 1 to 2 hours. I since had the bar mount milled to fit Stihl and haven't used it anymore. I have a chain for it also.

Also I have a brake handle for the 026.

Have other parts for the 026,031,other bars and chisel chain , (some 50 ga.20" and under), and some 58 gauge 24" and 2 28" that fit Dolmar, Husky, Jonsersd, etc.

I would like to find a deal on 58 gauge semi chisel full comp with no bumper links, preferbly Stihl RM, Carlton,or Sandvik, up to 100'.

I'm also open to trades for decent medium to large stihls to fix or use for parts.

 

[HittinSteel]

I need a larger saw. Anyone interested in a near new 260?

 

[caddguy]

HITTINSTEEL -
Can you post some pics? I may be interested.

 

[HittinSteel]

HITTINSTEEL -
Can you post some pics? I may be interested.

I'll take a few tonight. Looks new except 2 scratches I put on the clutch cover somehow cutting saturday :censored:

 

[PB]

Any interest in a Pioneer Farmsaw II or a P40/41? Looking for a larger Pioneer, preferably a P60 or a larger Jonsered.

 

[cjcocn]

Any interest in a Pioneer Farmsaw II or a P40/41? Looking for a larger Pioneer, preferably a P60 or a larger Jonsered.

What qualifies as a larger Jonsered? (just out of curiosity)

And, if you get a 111/S out of this deal will you give it to me as a gift?