Swap meet...

[dragrcr]

any one got a P+C for a homie 2100?

 

[StihlGuitar]

Do you want to part with any of those saws? I'm looking for some winter projects.

I could probably do that. What are you lookin for?

 

[leeha]

any one got a P+C for a homie 2100?

I'm lookin for the same.
Very hard to find.


Lee

 

[Busmech]

2100

If you find a donor saw I need a flywheel for a 2100.

 

[2000ssm6]

I could probably do that. What are you lookin for?

Got any 260s or 440s?

 

[dragrcr]

If you find a donor saw I need a flywheel for a 2100.

it is hard to find one. if i dont get something, i will let you know and you can get the FW off me.

 

[StihlGuitar]

Got any 260s or 440s?

I've got lots of 026 parts.

 

[sefh3]

I could probably do that. What are you lookin for?

Something that could run a 20" bar. Honestly it doesn't matter. My bench is about empty so PM me model and cost.

 

[sefh3]

If you find a donor saw I need a flywheel for a 2100.

I could use a coil from a 2100 if anyone has one.

 

[valekbrothers]

Stihl 019t

I have a good running 019t with a 12" bar. Everything works as it should. I have this listed for sale on here, but I thought I would list it here and maybe just trade for something. Looking for just about anything "orange" or large mount bars,,,size????. If you have something interesting, let me know.

 

[cleaf30]

I've got lots of 026 parts.

Do you have an 026 carb with high and low speed adjustments? Looking at the IPL only one out of six of the carbs they used has the low speed adjusment and that's the one i got. Was thinking of opening up the exhaust a bit but can't adjust for it with the carb I got.

 

[StihlGuitar]

Do you have an 026 carb with high and low speed adjustments? Looking at the IPL only one out of six of the carbs they used has the low speed adjusment and that's the one i got. Was thinking of opening up the exhaust a bit but can't adjust for it with the carb I got.

I'll look. You should throw an 044 carb on it and make it scream. I've got a couple 044 carbs.

 

[Modifiedmark]

I need a air filter for a Poulan 361. Anyone got one laying around?

 

[MS460WOODCHUCK]

I have these parts to a 056AVSEQ. All of these parts are good. The piston and cylinder are in very good shape and the cylinder says mahle on it. The bucking spike is the inner spike. PM me if interested.
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=saws048.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws048.jpg" border="0" alt="Photobucket"></a>

 

[MS460WOODCHUCK]

I have 3 bars to deal. The first one is a Stihl ES 36'' 404' for a 088/880 with only 3 tanks of fuel ran with it, it comes with 2 chains, both chains are woodland pro full chisel the full comp has been sharpened with a file 1 time and the skip has never even been on a saw. The second bar is the original 41'' .404 to a 088 with a stihl full chisel that has never been sharpened. The sprocket tip on the 41'' is just a little loose not bad though I would run it with no worries. The third bar is a 42'' windsor duratip (hardnose) for a poulan 5400, pp505 and I think it will fit huskies too. The code on it is 42HU63 this bar has only had one tank of fuel ran with it and the full chisel stihl chain. Most of the red paint being off is from cleaning it with carb cleaner.
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=saws044.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws044.jpg" border="0" alt="Photobucket"></a>

I still have this 36'' ES bar and 2 chains if anyone is interested.

 

[Nethercutt]

056 SEM flywheel

I've got the SEM ignition module, just need a flywheel to go with it!
Have many 056 parts to trade (except ignition of course), some S10 parts, a nearly complete 041. Or I'll pay cash.

 

[barneyrb]

Homelite EZ Automatic

I need the carb mounting screws, air filter bracket, air filter, and top of housing. Can anyone help? On this saw the carb was loose and everything is gone.

 

[2000ssm6]

Anyone have any MS360 parts or a 360 parts saw?

 

[snofrog]

I have a weak running low comp mac 200 . I`d like to trade for a large working bar/chain combo for my Stihl 660 or a replacement saw for my Poulan lol thanks Mark

 

[valekbrothers]

I have a good running 019t with a 12" bar. Everything works as it should. I have this listed for sale on here, but I thought I would list it here and maybe just trade for something. Looking for just about anything "orange" or large mount bars,,,size????. If you have something interesting, let me know.

Sold!