Swap meet...

[jerrycmorrow]

Jerry,

I dug the box out and have it in the truck I will try to go through it at lunch time and shoot you a pic or two.

tom, thanks. really appreciate it. jerry

 

[Chris J.]

As usual I'm looking for:
Jonsered parts, pretty much anything that'll work on a 2095.
Fuel system parts, including carb kits, for Poulan 3700, 5400, & SD25.
Good p&c from an Echo CS-520 opcorn:, also the brake band.
I supposed durable fibre paper with fancy engraving print would be acceptable under the right circumstances .
Trading for some furure porting on the Jonsered 2095 is a possibility.

I'm looking to clear out a couple of project saws that I'll never got around to working on. If you need photos there might be some floating around AS, or I can email them, or upload them to Photobucket. Ask questions, & I'll check if I don't know the answer (before you even ask, the meaning of life is 42, & the secret to happiness I have no idea). Up for trade:

Poulan 361 rebadged as a Wright 136....Homelite C-72, someone previously contacted me ???, I need to check my PMs....Lancaster 6-45 (I think)....Poulan 3400....Stihl 011/009--Variety of misc. parts....Jonsered 920 carcass....Disston DA-211 very incomplete, some NOS parts....Titan 40 nearly complete....Misc sprockets & chainsaw parts.

 

[thomas1]

tom, thanks. really appreciate it. jerry

Here you go, missing one bar nut and the clutch cover has a crack.

But, it sure would fit nice into a box with that 254.

 

[thomas1]

As usual I'm looking for:
Jonsered parts, pretty much anything that'll work on a 2095.
Fuel system parts, including carb kits, for Poulan 3700, 5400, & SD25.
Good p&c from an Echo CS-520 opcorn:, also the brake band.
I supposed durable fibre paper with fancy engraving print would be acceptable under the right circumstances .
Trading for some furure porting on the Jonsered 2095 is a possibility.

I'm looking to clear out a couple of project saws that I'll never got around to working on. If you need photos there might be some floating around AS, or I can email them, or upload them to Photobucket. Ask questions, & I'll check if I don't know the answer (before you even ask, the meaning of life is 42, & the secret to happiness I have no idea). Up for trade:

Poulan 361 rebadged as a Wright 136....Homelite C-72, someone previously contacted me ???, I need to check my PMs....Lancaster 6-45 (I think)....Poulan 3400....Stihl 011/009--Variety of misc. parts....Jonsered 920 carcass....Disston DA-211 very incomplete, some NOS parts....Titan 40 nearly complete....Misc sprockets & chainsaw parts.

What's left of the 920? I ram across a guy who has one that needs a airfilter and cover and a recoil assembly.

 

[jerrycmorrow]

Here you go, missing one bar nut and the clutch cover has a crack.

But, it sure would fit nice into a box with that 254.

which 254 would that be?

 

[thomas1]

which 254 would that be?

The one with the goofy coil.

 

[Chris J.]

What's left of the 920? I ram across a guy who has one that needs a airfilter and cover and a recoil assembly.

I got the 2095 carcass confused with the incomplete 920. In the below-linked thread go to post 28 for photos of the 920 parts that I have.

http://www.arboristsite.com/chainsaw/156924.htm

 

[Chris J.]

I tried to edit my post to avoid any future confusion, but all I'm getting is a blank field.

 

[PA Plumber]

If you are still looking I will check out the one I have at home. Should have all those parts attached.

Shea

Thank you, I do have a package on its way.

Is there enough of the saw to make her run?

 

[surfincr]

looking for an 18/20" bar and chain for an stihl 045 and a 25" bar and chain for a stihl 660 to use for this weekends storm cleanup

if i have a NOS 045/056 oiler (possibly more if i can find them in the dark when i get home) for trade or green.

 

[Eccentric]

As usual I'm looking for:
Jonsered parts, pretty much anything that'll work on a 2095.
Fuel system parts, including carb kits, for Poulan 3700, 5400, & SD25.
Good p&c from an Echo CS-520 opcorn:, also the brake band.
I supposed durable fibre paper with fancy engraving print would be acceptable under the right circumstances .
Trading for some furure porting on the Jonsered 2095 is a possibility.

I'm looking to clear out a couple of project saws that I'll never got around to working on. If you need photos there might be some floating around AS, or I can email them, or upload them to Photobucket. Ask questions, & I'll check if I don't know the answer (before you even ask, the meaning of life is 42, & the secret to happiness I have no idea). Up for trade:

Poulan 361 rebadged as a Wright 136....Homelite C-72, someone previously contacted me ???, I need to check my PMs....Lancaster 6-45 (I think)....Poulan 3400....Stihl 011/009--Variety of misc. parts....Jonsered 920 carcass....Disston DA-211 very incomplete, some NOS parts....Titan 40 nearly complete....Misc sprockets & chainsaw parts.

I contacted you earlier about the C-72. Too many other things came up and wiped out the available time and money (and then some). Can't even remember the details of our discussion. I think you sent some pics.........but I lost them when I cleaned out my PM and/or email boxes. I can help you with carb kits for your Poulan 5400 and S25D (you'll need to tell me what carb that 25 has, as they used a couple different ones). Send me a PM with what else you're looking to get out of the C-72.

 

[jerrycmorrow]

The one with the goofy coil.

oh yeah, forgot all about that one. ha. the most sought after part on those old oly's is the coil. that's why i asked about it.

 

[MnSam]

jonsered 601 for trade

Fairly decent old saw. Idles and runs nice. Spark and compression are good, piston looks great. Pull rope is a little short, clutch cover is cracked and has been cut away at some point (not sure why), old style spark plug and boot. Looking for an 028 or 031 (project or not). What do you have? Open to all options.

 

[tbone75]

Just found these saws close to me.I don't care for Macs.Anyone interested in them let me know.

 

[morewood]

Thank you, I do have a package on its way.

Is there enough of the saw to make her run?

The saw is complete w/new bar, low, low compression(runs, kinda), low priority.

Shea

 

[DSS]

Here's your saws, John

 

[Warped5]

Just found these saws close to me.I don't care for Macs.Anyone interested in them let me know.

Hi John - What does it say on the top sticker for this one? Thanks!

 

[Jon1212]

Ted I zoomed in, and it says "Dead mice collection, please send to Cedar Lake Indiana"......LOL!!!

 

[Warped5]

Ted I zoomed in, and it says "Dead mice collection, please send to Cedar Lake Indiana"......LOL!!!

Thanks ..... ..... ya blew my bargaining position.

 

[o8f150]

Ted I zoomed in, and it says "Dead mice collection, please send to Cedar Lake Indiana"......LOL!!!

ouch