Swap meet...

[Mastermind]

Your link doesn't work Randy.

Well now that sucks.

Sure knocked the wind outta that post. :msp_smile:

Oh well.....reckon it ain't really none of my business anyway.

 

[Metals406]

Well now that sucks.

Sure knocked the wind outta that post. :msp_smile:

Oh well.....reckon it ain't really none of my business anyway.

There's a reason I called dude out in the Giving thread, on his Saturday Post Office visit. A lot of PO's only deliver on Saturday, and you can't drop nothing off. . . That's why I looked it up some. BTW, the town and zip he says he's from is only ten miles from the Union county line.

Ya'd think if he was gonna make it up, he'd pick somewhere further away.

He's already started the lying again, I say he needs his ass kicked, and I sure hope he didn't extort anything from the giving thread. He's a bad egg and a liar. He begged for forgiveness before, and swore he'd never do it again. YEAH RIGHT! :rant:

 

[komatsuvarna]

There's a reason I called dude out in the Giving thread, on his Saturday Post Office visit. A lot of PO's only deliver on Saturday, and you can't drop nothing off. . . That's why I looked it up some. BTW, the town and zip he says he's from is only ten miles from the Union county line.

Ya'd think if he was gonna make it up, he'd pick somewhere further away.

He's already started the lying again, I say he needs his ass kicked, and I sure hope he didn't extort anything from the giving thread. He's a bad egg and a liar. He begged for forgiveness before, and swore he'd never do it again. YEAH RIGHT! :rant:

I agree. I guess its not really my business either, BUT it probably is some of you alls....... DH1984 is from Luttrell TN, Tree wacker states hes from Mascot TN, which is 13 miles apart post office to post office. DH1984 is a member of another site I visit rarely, and all his contact info was in his signature. Just so happened a member here had his contact info too. Put 2 and 2 together, and BAMMM....There ya have it.

I talked with a few members before hand as well.....



...Anyways, back to your regular programming...

 

[PA Plumber]

Looking for a decent Husky 359 p/c. Or maybe at least a decent cylinder to get started. Maybe I can find a piston and rings after that.

Yep, I've got a toasted version. You know, even with butter and jam, it still won't run well.

 

[MechanicMatt]

Man that really PISSES ME OFF, that @$$ was all over the CHRISTmas thread. I know as a Christian Im not supposed to judge him and give him the chance to prove other wise. But then there is the Matt that I was in my late teens and early twenties...............I want to put a quick left jab fallowed by a straight right to break his freakin nose. I HATE LIARS. I don't steal or lie, I break my back at a Car dealership 6 days a week, work at my buddies shop 3-4 nights a week to make my HONEST living. Man this guy really pisses me off, I gotta shut of the lap top tonight and go sharpen some chains to get my mind off it. Ah, its probably cause Im out of coors light too!

 

[SawGarage]

I've got a 272xp with bad crankbearing. I purchased a nice 61 crankcase of of ebay a while back to replace it. The crank in the 61 has a different flywheel mount so I'm looking for either a flywheel that will mount to the 61 case or a 272 crank. I also need a muffler. I have 257/261 parts, ms660 tank (i think i have a good oem cylinder too) and some other stuff..oh, and the leftover 61 or 272 crankcase depending on which i use.

if you come up empty handed from Jockeydeuce, let me know... should be able to help!!

I can probably fix you up on that stuff.....PM on the way, shortly.

savin the day again!!! oke

It's like you never even took a break, huh???:biggrin:

Yeah, some things NEVER change msp_rolleyes:

Man that really PISSES ME OFF, that @$$ was all over the CHRISTmas thread. I know as a Christian Im not supposed to judge him and give him the chance to prove other wise. But then there is the Matt that I was in my late teens and early twenties...............I want to put a quick left jab fallowed by a straight right to break his freakin nose. I HATE LIARS. I don't steal or lie, I break my back at a Car dealership 6 days a week, work at my buddies shop 3-4 nights a week to make my HONEST living. Man this guy really pisses me off, I gotta shut of the lap top tonight and go sharpen some chains to get my mind off it. Ah, its probably cause Im out of coors light too!

Hey Matt, hope all is well.....

wait, Coors light? I figured in the Adirondacks you'd have some Saranac, or something good... oke:







Hey Guys, I need some parts that are in my sig (55 flywheel should be squared away... )

as well as a 340-353 husky brake cover
large mount Stihl or Dolmar bar
maybe a decent sized bar & 404 chain for the 2100 project
372 HD filter cover and LOW cover


got plenty to trade... 372, 288, 350, bars, chains, etc...

thanks guys!!

J

 

[Chris J.]

Charles "Spider" W.

 

[timberdollars]

Almost mighta got burnt "Thanks All"

Man that really PISSES ME OFF, that @$$ was all over the CHRISTmas thread. I know as a Christian Im not supposed to judge him and give him the chance to prove other wise. But then there is the Matt that I was in my late teens and early twenties...............I want to put a quick left jab fallowed by a straight right to break his freakin nose. I HATE LIARS. I don't steal or lie, I break my back at a Car dealership 6 days a week, work at my buddies shop 3-4 nights a week to make my HONEST living. Man this guy really pisses me off, I gotta shut of the lap top tonight and go sharpen some chains to get my mind off it. Ah, its probably cause Im out of coors light too!

Sorry for keepin this going, but I have a PM from "HIM" last week wantin something from me for $ and might have gotten burnt if I did see this and go back and figure it all out!!!!
I'll steer clear for sure! you all been on here along time compared to me.

Thanks

 

[timberdollars]

Visited local shop today, there blowin out Once Used Chain!!! Sharpened by them, all sharpened only once. Rakers/teeth pro ground. I picked up some 105dr .63ga Skip chisel. 32" "Stihl Branded" Dirty but real nice!
Once used Oregon 72dr .050 LPX 20" has ramped drive links, chisel, never sharpened still sharp, dirty but nice stuff.
Once used 325 .050 72dr Carlton 18" chisel, never sharpened and still razor sharp

I have a few of each, maybe more avail. Was not STUMP chain

Trade for Partner 500/5000 clutch cover
Poulan 4200 air filter
Partner saws (anything. and everything)

Anything else ????? possible green

Duane

BUMP!!!
(I paid $12.00 a loop for the 105dr, just try'n to pass the savings on)

Duane

 

[jimbo1490]

Looking for a decent Husky 359 p/c. Or maybe at least a decent cylinder to get started. Maybe I can find a piston and rings after that.

Yep, I've got a toasted version. You know, even with butter and jam, it still won't run well.

I've got a nice one. I mean a cylinder for a 359. Why, what were you thinking?

PM Sent

 

[thomas1]

I agree. I guess its not really my business either, BUT it probably is some of you alls....... DH1984 is from Luttrell TN, Tree wacker states hes from Mascot TN, which is 13 miles apart post office to post office. DH1984 is a member of another site I visit rarely, and all his contact info was in his signature. Just so happened a member here had his contact info too. Put 2 and 2 together, and BAMMM....There ya have it.

I talked with a few members before hand as well.....



...Anyways, back to your regular programming...

FWIW, I sent Tree Wacker a couple saws about a month ago. The shipping address he gave me was a PO box in Luttrell. He did pay by paypal prior to me shipping.

 

[komatsuvarna]

Im not getting in it no more than I have. I know A lot of members remember some of the past bullsh!t, And Randy and I felt like They should know who they were dealing with. I dont care if he stays, or goes. The whole thing was just a FWIW.........

..and in the christmas thread he posted he was from Mascot TN, which in in Knox county. Luttrell is in Union county.......

Im Out.

 

[Mastermind]

Im not getting in it no more than I have. I know A lot of members remember some of the past bullsh!t, And Randy and I felt like They should know who they were dealing with. I dont care if he stays, or goes. The whole thing was just a FWIW.........

Im Out.

I had a dealing with him as DH1984 that left a bad taste in my mouth. This ain't OZ but I still want to know who the man behind the curtain is. I think you guys should too.

 

[Modifiedmark]

I had a dealing with him as DH1984 that left a bad taste in my mouth. This ain't OZ but I still want to know who the man behind the curtain is. I think you guys should too.

Plus the fact that he was banned and now is back under another name. If the mods are fine with that then I guess I am too but I'm not sure its right to come back under another name.

 

[komatsuvarna]

Plus the fact that he was banned and now is back under another name. If the mods are fine with that then I guess I am too but I'm not sure its right to come back under another name.

He's been banned and back atleast 2 times that I know of, maybe more. Fireman2285 from Lenoir City was one of them. Then his ''cousin up in Grainger County'' LMFAO.:hmm3grin2orange: Do a search for dh1984, hell he's a master logger on another forum.
I think about everyone remembers his Ebay Thread as well.


Oh well, You guys take care, I gotta lot of stuff to do today, and its not gonna do it itself .

 

[muddawg]

I agree. I guess its not really my business either, BUT it probably is some of you alls....... DH1984 is from Luttrell TN, Tree wacker states hes from Mascot TN, which is 13 miles apart post office to post office. DH1984 is a member of another site I visit rarely, and all his contact info was in his signature. Just so happened a member here had his contact info too. Put 2 and 2 together, and BAMMM....There ya have it.

I talked with a few members before hand as well.....



...Anyways, back to your regular programming...

treewacker has a P.O. box in luttrell !

wish Id seen theese posts sooner

mike

 

[sachsmo]

Looking for a clutch and drum for mini mac 110.

Kind of got the bar oil/mix backwards and while trying to burn the oil out of the system inadvertantly left the brake on DOH.

Who says these little boogers don't have any power?

Melted the aluminum shoes to the drum.

Guess that's why the smoke didn't clear up eh?

Have stuff, and misc. tools for trade.

Thanks,

mo

 

[Warped5]

Looking for a clutch and drum for mini mac 110.

Kind of got the bar oil/mix backwards and while trying to burn the oil out of the system inadvertantly left the brake on DOH.

Who says these little boogers don't have any power?

Melted the aluminum shoes to the drum.

Guess that's why the smoke didn't clear up eh?

Have stuff, and misc. tools for trade.

Thanks,

mo

Mo -

First off .. why bother? I MAY have one here, got a part number?

No one here ever bashed them for lack of power. Just open it up to work on it and you'll see why folks want to dump them into circus cannons ....

 

[sachsmo]

Call it a challenge, I love a good challenge.

 

[Chris J.]

Hopefully a response will be forthcoming from The Powers That Be At ArboristSite (TPTBAA) regarding Tree Wacker, possibly A/K/A dh1984, etc.

Has anyone here done business with Tree Wacker, and had him use the name Charles W. (think of a spider)?

If TPTBAA decide/have decided to give him another chance, that's their decision to make, not ours. I do feel like we have the right to know about Tree Wacker's past history on AS.