Swap meet...

[sefh3]

McCulloch 250

I'm looking for points and condensor for a McCulloch 250. If someone has some and doesn't need them send me a PM. Thanks

 

[epicklein22]

In need of the orange handle for an 021/023/025/210/230/250.

Lots of parts to trade or green stuff.

 

[StihlGuitar]

Who has 044/ms440 parts?

I need an entire case (preferred) or the flywheel side only. Also need an oiler, clutch and clutch drum.

I've got the case and oiler. The case is complete, crank has bad rod bearing so it is useless (unless someone things they can do something with it, have at it.) I'm looking for 046 parts, specifically a top cover, top handle, or flywheel side of a crank case. Also an 036 pro top cover.If anyone has any of these please let me know. I have lots of parts to trade, mostly Stihl, but Jonsered, Echo, Partner/Pioneer, and even a Baird/Poulan 3400 (yuck!)

 

[StihlGuitar]

044 parts for 046 parts

I have an 044 crankcase, flywheel, chain tensioner and oiler that I would like to swap for an 046 crankcase. If anyone has one or if they would prefer cash, let me know.

 

[67 Mustang]

Dolmar 133

Need a good ignition coil/module for Dolmar 133.

 

[7hpjim]

needs

I'm looking for a clutch cover for a husqvarna 181

 

[epicklein22]

I've got the case and oiler. The case is complete, crank has bad rod bearing so it is useless (unless someone things they can do something with it, have at it.) I'm looking for 046 parts, specifically a top cover, top handle, or flywheel side of a crank case. Also an 036 pro top cover.If anyone has any of these please let me know. I have lots of parts to trade, mostly Stihl, but Jonsered, Echo, Partner/Pioneer, and even a Baird/Poulan 3400 (yuck!)

I bought a parts saw off ebay the other day, if I need anything, I will pm you. Might have some 460 parts laying around.

 

[TRI955]

Need...

Jonsered 2165 or 2171 case.

Mike

 

[StihlGuitar]

In need of the orange handle for an 021/023/025/210/230/250.

Lots of parts to trade or green stuff.

I've got an 021 parts saw. The handle is in new condition from what I can remember. I have a lot of other parts for it too if you need any of them. PM me and let me know what Stihl models you have parts for.

 

[cbolyard]

I have an 044 crankcase, flywheel, chain tensioner and oiler that I would like to swap for an 046 crankcase. If anyone has one or if they would prefer cash, let me know.

I have an MS460 complete case I might trade. If you have good rear handle/tank for the 044 I'd throw in the same for the 460.

 

[StihlGuitar]

I have an MS460 complete case I might trade. If you have good rear handle/tank for the 044 I'd throw in the same for the 460.

I just sold the rear handle, sorry. I so, in fact need the entire case for the 046. I can throw you some cash or can give you parts for many other saws if you're interested. 034,036,024,026, 028, 021, 009, 020, etc.

 

[cbolyard]

I just sold the rear handle, sorry. I so, in fact need the entire case for the 046. I can throw you some cash or can give you parts for many other saws if you're interested. 034,036,024,026, 028, 021, 009, 020, etc.

Bummer... I've been on the prowl for a clean 044 tank/handle. The 460 I have is a complete saw minus bar and chain... but the P&C are hosed. The tank/handle are currently on my 044 and if I let the whole thing go... I'm out a running saw...
But I'm open to offers on the whole shebang for the 460. Cash is acceptable in WA state still

 

[blsnelling]

I'm looking for a muffler and carb box for a 031. PM me if you've got something.

I've got a carb box located and was able to weld my muffler up tonight. Thanks for checking guys.

I've got the saw all back together and running, but found a few more parts that I need.

1. Air guide plate that goes behind the muffler.
2. Chain catcher and screw.
3. Guard plate that goes in the back of the clutch cover.
4. One rear handle AV mount.

 

[Ptarmigan]

372 crankcase or parts saw

Hey everyone,

I'm pretty new to the site and just starting to get my CAD revved up.

I've currently got a 51 that I'm learning quite a bit on, I've got a new 55 cylinder on order and am working my dremel porting the old one. Hopefully the 55 will be up and chewing through wood as soon as the rest of my parts arrive. So I'm looking for the next project.

I really NEED a bigger 70cc saw too. The one I'm currently using belongs
to the lodge I work at and anything smaller would not be enough. I've had to order a couple of tools for the 51 so I'd like to stay with Husqvarna to ease the special tool requirements.

I was wondering if anyone had a 372 crankcase or parts saw laying around that they would be willing to part with, to send it to a new home, where I'd
rebuild it and get it spitting wood chips again.

Thanks

Sean

 

[little possum]

Hey gang, lookin for a some 009 parts, figure somebody out there might have a crushed one, or maybe straight gassed. PM please if you have any parts.

Thanks.

 

[wigglesworth]

Hey gang, lookin for a some 009 parts, figure somebody out there might have a crushed one, or maybe straight gassed. PM please if you have any parts.

Thanks.

I have a whole parts saw....Interested?

 

[Saw Dr.]

I've got a carb box located and was able to weld my muffler up tonight. Thanks for checking guys.

I've got the saw all back together and running, but found a few more parts that I need.

1. Air guide plate that goes behind the muffler.
2. Chain catcher and screw.
3. Guard plate that goes in the back of the clutch cover.
4. One rear handle AV mount.

I may have a few of those NOS, Brad. You get to look up the part #'s.

 

[jockeydeuce]

I may have a few of those NOS, Brad. You get to look up the part #'s.

Do you mean the AV's??? I think Im gonna need two as well.

Part # 1113 790 9910

Help Brad first of course!!

 

[Saw Dr.]

Anyone have a later 026 tank to swap for the earlier style with the post filter? Also need a recoil and muffler front for 026. Need an air filter too, but I have to wait and see which tank I end up using....

 

[Bowtie]

Anyone have a later 026 tank to swap for the earlier style with the post filter? Also need a recoil and muffler front for 026. Need an air filter too, but I have to wait and see which tank I end up using....

I have some 026 air filters, but I think they are all for the pro with the intellicarb and the pro style filter cover.