Swap meet...

[little possum]

On the lookout for some large husky mount bars. Preferably 20-24-36 or maybe a 42. 3/8s Chain.
I am not brand specific. Just looking to see if anybody had some old ones they werent gonna use much anymore.

Not much to trade, but do have small amounts of green.($)
Thanks

Have a Stihl Picco bar, if anybody is interested, sold the 009, and forgot about the extra bar. PM me for details

 

[barneyrb]

No problemo... although if you had a NOS piston and rings for one of the original Titan saws, I'd have to be your new best friend.

If I had it, you'd have first dibbs....

 

[MR4WD]

It's not on your list, but I'm going to be putting a clean 395 with new mains, seals, fuel system, muffler, air filter, and a Meteor piston in the trading post next weekend...

That's on my list though!! What's it need? Wrap? Ported?

 

[Saw Dr.]

That's on my list though!! What's it need? Wrap? Ported?

If it is coming out of JJ's shop, probably just some fuel and a guy with large forearms to hang on to it!

 

[Jacob J.]

That's on my list though!! What's it need? Wrap? Ported?

If it is coming out of JJ's shop, probably just some fuel and a guy with large forearms to hang on to it!

lol...I was planning on doing it up stock...but I can work it over, or leave the cylinder off and send it to a builder, no problemo.

It's one of the saws I got from Pinemartin. It's decent looking but has some apparent wear and tear. I went through and replaced all the critical parts. I only have half-wrap handles for it, new. It is a high-top and will have a new HD oem air filter.

 

[parrisw]

That's on my list though!! What's it need? Wrap? Ported?

If you'r looking for a 395, I wouldn't hesitate to get it from JJ.

 

[MR4WD]

lol...I was planning on doing it up stock...but I can work it over, or leave the cylinder off and send it to a builder, no problemo.

It's one of the saws I got from Pinemartin. It's decent looking but has some apparent wear and tear. I went through and replaced all the critical parts. I only have half-wrap handles for it, new. It is a high-top and will have a new HD oem air filter.

If you'r looking for a 395, I wouldn't hesitate to get it from JJ.

I need a 395 like I need a chrome plated turd, but it'll fit the collection nicely.

Just traded my 385 for a 335xpt and sent money out for a sling'r 390. Surely a stock 395 would bore me............. I prefer to have only wood weapons, my 372 is my fav for work. Used it for 6 hours at least every day on the last 2 week shift. I could use something that will pull a 42" bar to put some wood in the dirt for my limited, tourqey 3120 to mill the heck out of..

 

[wigglesworth]

Next on the block....Homelite XL-123..runs good, idles good...but I havent cut anything with it. It does not have the correct clutch cover, it fits and the chain tensionser works great, but it leaves a gap at the top. $$ talks, but will trade.

 

[Jacob J.]

I need a 395 like I need a chrome plated turd, but it'll fit the collection nicely.

Just traded my 385 for a 335xpt and sent money out for a sling'r 390. Surely a stock 395 would bore me............. I prefer to have only wood weapons, my 372 is my fav for work. Used it for 6 hours at least every day on the last 2 week shift. I could use something that will pull a 42" bar to put some wood in the dirt for my limited, tourqey 3120 to mill the heck out of..

I haven't figured out yet how to chrome-plate a turd, but I assure you, when I do I'm retiring.

I can make a 395 that will pull a 42" with authority, but it might get too big for its britches...

 

[bowtechmadman]

I'm runnin a JJ 395 and she runs real nice!

 

[Hagen70]

I'm runnin a JJ 395 and she runs real nice!

Seriously, do you have to keep rubbing it in?

 

[parrisw]

Seriously, do you have to keep rubbing it in?

Lol, I got a Jacob 372!! Does that help.

 

[Hagen70]

I was at Pinemartins GTG with Bowtech there as well when he got his saw on a trade. Bowtech apparently had the better offer to give to Pinemartin and I got hosed. I was trying to weasle in on it is what happened in reality. I had my 064, 288, and 266 in on the offer for the 395. Go figure.

 

[chainsawwhisperer]

A friend of mine needs a brake handle for a Shindaiwa 350.
Anyone have one?
CSW

Bump
Anyone have one?

 

[NuConcepts]

so heres what i need, i need a husky 272xp,268,266,or 61 new style clutch cover, muffler, cylinder top cover, airfilter. i need a br 550 piston and rings. a 026 bottom end w/ good bearings.i need a 20 in bar for a stihl 044. i need a piston an rings for a ms290.

i have husky 350 part saws, a 026 w/ noisy bearings (hammered), echo blower parts, maybe some husky 51 parts, stihl auger parts, maybe a whole bunch of other parts. some echo trimmer parts. tanaka ecs 315, some cash. let know.

 

[dragrcr]

I was at Pinemartins GTG with Bowtech there as well when he got his saw on a trade. Bowtech apparently had the better offer to give to Pinemartin and I got hosed. I was trying to weasle in on it is what happened in reality. I had my 064, 288, and 266 in on the offer for the 395. Go figure.

ill buy it from him and trade you for those three.

 

[m44]

I need a piston for a super ez, and a couple of walbro hdc carbs or rebuild kits, a recoil assembly for a 08s. I have for trade, husky 55 rancher parts. super xl parts, xl2 parts, and homelite 240 parts and a dynamark (rebadged lombard) parts saw. also will pay cash.

 

[bowtechmadman]

Show me the money drag!

 

[Hagen70]

I believe Dragrcr was referring to buying Jacob J's next 395 build.

I am also needing to find an air filter cover and air filter for a Remington PL-7
I still have the one new piston cylinder kit non-oem for a Husqvarna 266 and
a good used Mahle cylinder as well for a 266

 

[m44]

I would also love a Homelite 2100, 540,545,550.