Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Swap meet
I was cleaning out the shed and found some old saws I don't have any use for.Two Mac 110's and one Husqvarna 23 Compact.If any one can use them ,let me know what you have to trade.I tried to add pics,could not get them under the byte limit,sorry.
Stihl's;MS180c,032av,034,038 Mag,8x 028 projects.
Husky;340
Echo's;Cs3450,2 x CS 302s
I was cleaning out the shed and found some old saws I don't have any use for.Two Mac 110's and one Husqvarna 23 Compact.If any one can use them ,let me know what you have to trade.I tried to add pics,could not get them under the byte limit,sorry.
Stihl's;MS180c,032av,034,038 Mag,8x 028 projects.
Husky;340
Echo's;Cs3450,2 x CS 302s
Saw Dr.
Junk Collector
sefh3
Addicted to ArboristSite
stihl 041 parts
I'm looking for a good used fan housing with no broken tabs for this saw. Stihl number is 1110-084-1000.
I'm looking for a good used fan housing with no broken tabs for this saw. Stihl number is 1110-084-1000.
valekbrothers
ArboristSite Guru
272 parts
I am looking for a P&C for a Husqvarna 272.They don't need to be perfect, just useable. Also looking for a clutch cover for a Husqvarna 61. Would like a newer style that has the black plastic chain brake handle. PM me if you have these parts. Thank you.
I am looking for a P&C for a Husqvarna 272.They don't need to be perfect, just useable. Also looking for a clutch cover for a Husqvarna 61. Would like a newer style that has the black plastic chain brake handle. PM me if you have these parts. Thank you.
Honkie
ArboristSite Guru
Need a filter cover for a husky 285cd/2100cd
I have a bunch of 028 parts to trade.
I have a bunch of 028 parts to trade.
stihlboy
Guess who's back
ya dont want it lol i want the saw that part is for
john taliaferro
Addicted to ArboristSite
460
i am trying to find a nice 3/4 bar for 460. or where can i buy one .john t
i am trying to find a nice 3/4 bar for 460. or where can i buy one .john t
wigglesworth
Booned
Long shot...anybody want to trade a 3003 mount 32" powermatch w/new tip in .063 and a full comp 72LGX for the equivalent in a .050...Nobody stocks .063 around here so I have to order it 
HittinSteel
Addicted to ArboristSite
Anyone have a good working Walbro HDA 120 carb? Could have some Stihl chains to trade if I know by tomorrow. Thanks
little possum
Crash and Burn
Long shot...anybody want to trade a 3003 mount 32" powermatch w/new tip in .063 and a full comp 72LGX for the equivalent in a .050...Nobody stocks .063 around here so I have to order it
Too bad it won't fit a Husky, or Id swap ya somethan. Ill keep a eye out for ya though.
What pulls a 32" full anyways?
wigglesworth
Booned
My ported MS460. It pulls it quite well. No speed demon, but sure gets her done. I am going going to buy a loop of skip for it, if I cant trade it off. Nobody, I mean nobody sells .063 stuff around here. It can fit a husky with an adapter. Here is a pic. I know photography is not my strong suit.
Last edited:
little possum
Crash and Burn
Good lookin bar. I am workin on puttin a 24 inch Stihl on my 288 or 371.
Im trying to sell some smaller bars to get some money to buy a about a 32" or 36", .063 gauge for my 394.
I wish I had my adapter done.
Im trying to sell some smaller bars to get some money to buy a about a 32" or 36", .063 gauge for my 394.
I wish I had my adapter done.
Last edited:
Kwdog75
Addicted to ArboristSite
Looking for a good 034AV cylinder.
SP125 parts
Anyone know if the starter pawls on the SP81E are the same as the SP125?
If not, anyone have a couple for the SP125? I believe the pins are pressed into the flywheel so I'll consider the whole flywheel.
Anyone know if the starter pawls on the SP81E are the same as the SP125?
If not, anyone have a couple for the SP125? I believe the pins are pressed into the flywheel so I'll consider the whole flywheel.
Bowtie
Gearhead
i have quite a list of things I need for an 036 Pro I am building. Here goes.
Rubber decomp shroud
throttle trigger pin
the safety interlock trigger
rear handle cover
chain brake band, chain brake springs, and the master spring
starter rewind spring, pawls, and washer
2 brake bolts that go through the chain brake handle and the starter cover (cup washer and bolt one piece)
muffler cover
I have 028 parts, some 026 parts, an old smaller Homelite saw that would run, a Remmy SL-9 that could run, and cash.
Rubber decomp shroud
throttle trigger pin
the safety interlock trigger
rear handle cover
chain brake band, chain brake springs, and the master spring
starter rewind spring, pawls, and washer
2 brake bolts that go through the chain brake handle and the starter cover (cup washer and bolt one piece)
muffler cover
I have 028 parts, some 026 parts, an old smaller Homelite saw that would run, a Remmy SL-9 that could run, and cash.
Bowtie
Gearhead
i also have an 044 10mm project saw that needs a bunch of stuff I would trade for 036 parts and whatever.
I know it will need a coil and wiring, piston kit, wrist pin bearing, carb, top handle, muffler cover, and Im sure other odds and ends.
The muffler shell is new OEM
The plastic is faded and the cyl cover has a small crack in it by the name tag.
The case assembly seems in great shape. Crank spins easy, bearings appear good.
Tank and handle in very good condition.
I bought this as another project, but it needs more parts than I care to chase.
I know it will need a coil and wiring, piston kit, wrist pin bearing, carb, top handle, muffler cover, and Im sure other odds and ends.
The muffler shell is new OEM
The plastic is faded and the cyl cover has a small crack in it by the name tag.
The case assembly seems in great shape. Crank spins easy, bearings appear good.
Tank and handle in very good condition.
I bought this as another project, but it needs more parts than I care to chase.
StihlGuitar
ArboristSite Operative
i've got 036 parts to trade for it. private message me.
