Swap meet...

[dh1984]

Anyone has a bar in a echo 8000 mount that is over 26 inchs?

PM me with what you have and a price

The orgon mount number is D176

 

[zogger]

Anyone has a bar in a echo 8000 mount that is over 26 inchs?

PM me with what you have and a price

The orgon mount number is D176

Bwa! Good luck with that! That's the same bar some of the cool old larger poulans use, so you jiss *ain't gonna* shake one out around here, not any longer ones anyway, and they are scarce on the bay as well. Well, maybe you could, but you will have to be dangling some pretty darn juicy trade bait. I've been trying for at almost a year to get anything longer than a 20. You are most likely gonna have to just go shopping and pop for a new one.

Site sponsor edge & engine has the best new echo parts prices around that I have found.

 

[Mastermind]

OK here's a long shot. I need the lower handle brace for a Homelite 750.

 

[dh1984]

Bwa! Good luck with that! That's the same bar some of the cool old larger poulans use, so you jiss *ain't gonna* shake one out around here, not any longer ones anyway, and they are scarce on the bay as well. Well, maybe you could, but you will have to be dangling some pretty darn juicy trade bait. I've been trying for at almost a year to get anything longer than a 20. You are most likely gonna have to just go shopping and pop for a new one.

Site sponsor edge & engine has the best new echo parts prices around that I have found.

LOL i heard thats zogger I know they are atlest one on e-bay that will fit my new echo but they want 109.99 for it and i think it is used

But thanks for the heads up i'll start shopping around and see what i can come up with.

 

[Mastermind]

LOL i heard thats zogger I know they are atlest one on e-bay that will fit my new echo but they want 109.99 for it and i think it is used

But thanks for the heads up i'll start shopping around and see what i can come up with.

Sometimes it pays to learn to modify things a bit.......

 

[Chris J.]

Sometimes it pays to learn to modify things a bit.......

Randy, can you suggest someone with reliable modding knowledge? :msp_lol:










That was way too easy.

 

[bplust]

Sometimes it pays to learn to modify things a bit.......

Well, I can tell that you're not a dealer!

Looking for any and all McCulloch 7-10a, PM700, CP70 parts. Have lots to trade, or $$$. Email to [email protected] is preferred, or PM's.

 

[Mastermind]

Well, I can tell that you're not a dealer!

Looking for any and all McCulloch 7-10a, PM700, CP70 parts. Have lots to trade, or $$$. Email to [email protected] is preferred, or PM's.

I have this big hammer...see, and well.......I beat on stuff till it fits. :cool2:

 

[little possum]

I put a 36" Echo bar on my 394 Dude, find a bar thats close, and get to filing. Yes, we used a milling machine. But it was like a couple thousandths off each side...

 

[Jon1212]

I have this big hammer...see, and well.......I beat on stuff till it fits. :cool2:

Let me see if I have this straight; Hammer+ Larger PM box= Sponsor?

 

[Work Saw Collector]

Let me see if I have this straight; Hammer+ Larger PM box= Sponsor?

Larger box? :hmm3grin2orange:

 

[dh1984]

Oh i c now well if anyone has a bar that i can file down to fit. it don't have to be new just aslong as it's good useble condition untill i can get enough green slips to get one.

 

[Mastermind]

Oh i c now well if anyone has a bar that i can file down to fit. it don't have to be new just aslong as it's good useble condition untill i can get enough green slips to get one.

DH......does the spell check not work on the fancy new computer of yours???? :msp_unsure:

 

[bplust]

I have this big hammer...see, and well.......I beat on stuff till it fits. :cool2:

Dude! Giving away all of your porting secrets is not good for business!

I have Homelite XL-12/SXL, Pioneer 1200a, and Roper-built Craftman 3.7 parts.

 

[dh1984]

DH......does the spell check not work on the fancy new computer of yours???? :msp_unsure:

i haven't found it yet LOL but i'll see if i can find it for everyone though

 

[psuiewalsh]

I'm looking for a carb. Walboro SDC for a Homelite XL103. I have had this one apart 6 times and am starting to figure out why it was in pieces in a box. I have a parts homelite 150 to trade or some green foldy stuff or some 028 pieces.

 

[zogger]

Sometimes it pays to learn to modify things a bit.......

It does no good to try and modify a bar to fit, if you are looking for a longer bar, and the one you have to file on is two inches shorter....unless you have a northern tool "steel stretcher", then maybe that could work...

 

[psuiewalsh]

It does no good to try and modify a bar to fit, if you are looking for a longer bar, and the one you have to file on is two inches shorter....unless you have a northern tool "steel stretcher", then maybe that could work...

But if you had two bars and some creative welding you could do it.:msp_unsure:

 

[o8f150]

You don't get nothing till Gumby is gone! :msp_w00t:

there,,, you happy now???????????????? :msp_biggrin::msp_biggrin::msp_biggrin::msp_biggrin:

 

[Mastermind]

i haven't found it yet LOL but i'll see if i can find it for everyone though

That would be a good thing. I figure a lot of fellers would take you more seriously if your spelling was and punctuation was better. I quit school in the eight grade to start work.......but I try to use our language as it was meant to be used.

On my screen incorrectly spelled word have a squiggly red line under them. I didn't have to turn anything on to make it that way........it just works that way, Thank God.

there,,, you happy now???????????????? :msp_biggrin::msp_biggrin::msp_biggrin::msp_biggrin:

Thank you Scott.......My wife has epilepsy so when I come across flashing or rapidly moving things I scroll by them to prevent her from seeing them.


Now about that lower handle brace for my Homelite? :msp_biggrin: