MS460WOODCHUCK
Addicted to ArboristSite
I sent ya a PM jnl502...
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
jnl502
ArboristSite Operative
I have a ms 390 parts saw. lots of good parts. cash or trade. can email pictures
jnl
jnl
Warped5
WingNut
Thanks JJ ... I edited my post to include some important info .... The 880 is in near-showroom condition and he'd like an OEM bar ...
redheadwoodshed
Freebird
I won't be home for a couple more weeks and my pictures are on my computer at home.My camera doesn't take the best in the world anyway,but when I get home I could post them, if it would help.I mostly would like to see these saws go to somebody who could make them run again or use some parts off them to make another saw run again.
Mastermind
Work Saw Specialist
Still needing a 272 or 268 top cover and muffler.
I have a 24in 84dl husqvarna branded bar i would like to trade for a case splitter can send pic's if needed.
smilin possum
Addicted to ArboristSite
Hey guys I NEED 3 Mercury DA-211 spark plug covers. To finish up the last of the DA-211 projects. There has to be somebody somewhere that has one or 3 to get rid of. No trades just CASH. These will most likely be the last ones I'll get to do and would like to see them done and complete.
Thanks,
Joe
Thanks,
Joe
Eccentric
Mister Wizard
I saw the listing for that big 'ol Homelite Chris. Nice looking saw. Tops on my list. Post pics in the Homelite thread. :msp_thumbup:
Last edited:
parrisw
Tree Freak
Anyone got any interest in a minty 041 Farmboss AV with chainbrake? Also have a Mac SP80 and a SP81 that I'm willing to deal on, all runners. Looking for 372, 385,390, or green paper.
I may be wrong, but believe this is somewhat of a rare model? Could also include a new Stihl 18" bar with it.
I may be wrong, but believe this is somewhat of a rare model? Could also include a new Stihl 18" bar with it.
Last edited:
Anyone got any interest in a minty 041 Farmboss AV with chainbrake? Also have a Mac SP80 and a SP81 that I'm willing to deal on, all runners. Looking for 372, 385,390, or green paper.
I may be wrong, but believe this is somewhat of a rare model? Could also include a new Stihl 18" bar with it.
Does it have both crank bearings Will, or just the one??
Did I say that out loud?
parrisw
Tree Freak
Sure, but are they on the same side of the crank?
Looking for McCulloch 7-10/700 or 850/sp81 etc. saws/parts.
Have a good amount to trade, mainly parts.
SawGarage
Addicted to ArboristSite
At least there's ONE 041 in the past 25 pages of this thread that hasn't had a 'crank bearing go out' on it....
Will, HOPEFULLY, you don't have as much into THAT saw, as the owner had into that OTHER 041 :msp_scared:
I've got an EC 064 with an 066 top end on it. T'was my build off saw for Wiggz GTG this year.
It's kinda ugly, half of the oil cap is in the oil tank (old one broke off and the inner part fell inside at the GTG, lol), and it can occasionally be a stubborn starter. I think it needs a master control switch. The current one doesn't feel tight like a new one would.
Don't know what it's worth and I'm not necessarily looking to get something in trade at exact value. If anyone's interested lemme know whatcha got. Just wanna get rid of it cuz I don't use it and probably won't. Who needs a big heavy pig like this when you've got a good running 5 cube.
It's kinda ugly, half of the oil cap is in the oil tank (old one broke off and the inner part fell inside at the GTG, lol), and it can occasionally be a stubborn starter. I think it needs a master control switch. The current one doesn't feel tight like a new one would.
Don't know what it's worth and I'm not necessarily looking to get something in trade at exact value. If anyone's interested lemme know whatcha got. Just wanna get rid of it cuz I don't use it and probably won't. Who needs a big heavy pig like this when you've got a good running 5 cube.
parrisw
Tree Freak
I've got a decent SP81 runner if your interested.
At least there's ONE 041 in the past 25 pages of this thread that hasn't had a 'crank bearing go out' on it....
Will, HOPEFULLY, you don't have as much into THAT saw, as the owner had into that OTHER 041 :msp_scared:
No I did pretty good on this 041, have had it for quite a long time, never use it, just sitting on the shelf. I've been thinning the chainsaw heard lately, time for some stuff to go.
little possum
Crash and Burn
... Got a 2171 that needs to live in NC? I have a 281 runner that needs a few odds and ends.
Work Saw Collector
GTG Coffee Maker
I've got an EC 064 with an 066 top end on it. T'was my build off saw for Wiggz GTG this year.
It's kinda ugly, half of the oil cap is in the oil tank (old one broke off and the inner part fell inside at the GTG, lol), and it can occasionally be a stubborn starter. I think it needs a master control switch. The current one doesn't feel tight like a new one would.
Don't know what it's worth and I'm not necessarily looking to get something in trade at exact value. If anyone's interested lemme know whatcha got. Just wanna get rid of it cuz I don't use it and probably won't. Who needs a big heavy pig like this when you've got a good running 5 cube.
Sending PM.
