PM sent.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
PM sent.
MS460WOODCHUCK
Addicted to ArboristSite
I recently got a poulan 4000. I have only ran one tank of fuel through it and it seem's to run great. The compression is 150 on my gauge. The saw is in pretty good condition. I would like to trade it for a PP380,PP365,poulan 3500 or 3750. PM me if interested. Might be interested in selling straight out but would rather trade.
I've got an EC 064 with an 066 top end on it. T'was my build off saw for Wiggz GTG this year.
It's kinda ugly, half of the oil cap is in the oil tank (old one broke off and the inner part fell inside at the GTG, lol), and it can occasionally be a stubborn starter. I think it needs a master control switch. The current one doesn't feel tight like a new one would.
Don't know what it's worth and I'm not necessarily looking to get something in trade at exact value. If anyone's interested lemme know whatcha got. Just wanna get rid of it cuz I don't use it and probably won't. Who needs a big heavy pig like this when you've got a good running 5 cube.
Traded. ::thumbsup::
wigglesworth
Booned
Anybody have a brake handle and top cover for a 242 husky?
I'm gonna do this saw up to give away for terry's pal that got busted up.
I've got lots to trade or ??
I'm gonna do this saw up to give away for terry's pal that got busted up.
I've got lots to trade or ??
MEATSAW
ArboristSite Guru
I have a Tillotson HS-165A fully assembled carb that I don't need anymore. I also have a brand new 20" loop of Stihl 33RSC72 chain.
I would like to get a new chain(s) out of them that I might use: 16" 36RSC60, or 20" 33RSC70 -- Oregon/Carlton equivalent would be okay.
If you want them but dont have any new chains, I would take some $
I would like to get a new chain(s) out of them that I might use: 16" 36RSC60, or 20" 33RSC70 -- Oregon/Carlton equivalent would be okay.
If you want them but dont have any new chains, I would take some $
HAMMERHAND
ArboristSite Lurker
pioneer farmsaw 66cc for bar and chain
I have a pioneer farmsaw in good condition with new coil, carb rebuild, and pro 20 inch bar and chisel chain. It keeps flooding out and I don't have time for it .Looking to trade for a 24 or 28 new bar and chisel chain combo that fits a stihl 044.
I have a pioneer farmsaw in good condition with new coil, carb rebuild, and pro 20 inch bar and chisel chain. It keeps flooding out and I don't have time for it .Looking to trade for a 24 or 28 new bar and chisel chain combo that fits a stihl 044.
sefh3
Addicted to ArboristSite
Anyone have a bucking spike and air filter for a Homelite XL-901? I have parts to trade.
srcarr52
We can't stop here, this is bat country.
I have a whole saw that is not locked up.
I have a whole saw that is locked up for you. Come and get it.
Chris J.
Addicted to ArboristSite
IL to CA :msp_confused:?
-----------------------------------------------------------------------------------
I have for trade:
--A Stihl 015 with a bad coil (according to the seller according to the Stihl dealer) with a new coil. The saw is in great cosmetic condition, with a good b&c. The clutch cover took a walk one day when I was taking detailed photos of the saw and went in the house for quick break.
--Homelite C-72.
--Echo CS-440.
--Disston DA-211 parts. Previously I had some inquiries, but I'd really like to send everything at once.
--Titan 40. Needs recoil, otherwise appears complete.
--A bunch of Jonsered parts. Whoever sent the PM about the 621 parts, please send another PM, recently I had to delete a lot of PMs.
Items needed:
--Carb kits for Poulan 5400, S25CVA, 2400/2300CVA, 3700, Poulan blower (model # unknown can get carb model #), Stihl FS 55, Skilsaw 16xx series chainsaw.
--28"-36" bar for Poulan 5400.
--Echo CS-520 good p&c (I won't hold my breath).
--Jonsered 2095 & 920 parts. I might be getting some 920 parts, I need to get back with someone here.
I can still help with the 920 parts, I was just waiting to hear what all you needed.
You missed out on a 520 parts saw on ebay, which sold for $20. I would have alerted if I'd known you were looking for 520 parts.
Chris J.
Addicted to ArboristSite
Jcob, we're doing well here, I have some parts pulled for you, thought that you'd changed your mind. I'm going to put together a What I Need For My 920 list sitting down with the 920 (not quite a carcass, but less than a parts saw) & the IPL.
I keep a close eye on eBay; was it listed as a 520, CS-520? If it's the one that I saw, it had a roasted top end. Echo sells a piston kit $$$, or the whole engine $$$$, but no separate cylinder, no p&c kit.
It was just listed as Echo saw parts, no model number. It was obviously a 520 from what I could see though. It was missing a lot of stuff and turned over but
no mention of compression.
Any one want a Creamsickle MS290?
I ended up with it but it can't stay here. :msp_unsure: Its been a truck saw so it has some scuffs but nothings gouged or broken on it and its pretty good otherwise. P/C are nice and its 155-160lbs compression. 18" bar with .325 on it.
I can cash out on it or trade for something maybe. Just thought I would throw it out here before I did anything else with it.
I ended up with it but it can't stay here. :msp_unsure: Its been a truck saw so it has some scuffs but nothings gouged or broken on it and its pretty good otherwise. P/C are nice and its 155-160lbs compression. 18" bar with .325 on it.
I can cash out on it or trade for something maybe. Just thought I would throw it out here before I did anything else with it.
little possum
Crash and Burn
Chris what kinda of DA-211 parts do you have?
Any one want a Creamsickle MS290?
I ended up with it but it can't stay here. :msp_unsure: Its been a truck saw so it has some scuffs but nothings gouged or broken on it and its pretty good otherwise. P/C are nice and its 155-160lbs compression. 18" bar with .325 on it.
I can cash out on it or trade for something maybe. Just thought I would throw it out here before I did anything else with it.
PM sent
Still looking for a engine cover, bar nuts and 20" bar (oregon D096/D196, windsor UXL/TXL mount pattern) for a Echo 900EVL. Have greenbacks to trade. Thanks.
rms61moparman
Addicted to ArboristSite
Any one want a Creamsickle MS290?
I ended up with it but it can't stay here. :msp_unsure: Its been a truck saw so it has some scuffs but nothings gouged or broken on it and its pretty good otherwise. P/C are nice and its 155-160lbs compression. 18" bar with .325 on it.
I can cash out on it or trade for something maybe. Just thought I would throw it out here before I did anything else with it.
I don't want the saw but I danged sure want to save a copy of that picture!!!
That's something you don't see very often.
An MS-290 gettin' photographed in ModifiedMarks shop!
Mike
Mike
