Swap meet...

[ZeroJunk]

Trade for Jonsered 525 Ignition

I have a couple of new Husqvarna bars I will trade for a good working Jonsered 525 ignition. 16 and 24

 

[DSS]

I have a couple of new Husqvarna bars I will trade for a good working Jonsered 525 ignition. 16 and 24

Sorry dude, I forgot about that dang ignition. I'm sure it's here, I just have to find the saw. Writing a sticky note as we speak. I like that 24''.

 

[ChainsawmanXX]

Looking for 026 p&c!!!

 

[Rakoprtr]

Ok, so I dug this old thing out last week 'cause a guy wanted a hedge trimmer attachment for his 015. Sadly, this is an 020, and the two don't interchange. So here's this 020 with the HS20 attachment. Piston and cylinder are fine, saw will not fire on prime, so I'm guessing points. I could use either a 024AVS or 026 piston and cylinder, or 372 parts. Presidential Portraits are welcome as well.

Will that attachment fit an 021

 

[Rakoprtr]

Got a brand new in box 25 inch 3/8 stihl chain full chisel part number 33 rs 84
lookin fer a good pair of chaps if anyone not usin em or a full brim hard hat or extra b& c for one of my running saws

 

[SawGarage]

Anyone have a scored 385 or 390 cylinder laying around? Doesn't matter how bad it is.

Brad,

ya getting one bored & chromed? I may have a decent 385 cyl... shoot me a PM, and I'll take a peek

Looking for 026 p&c!!!

I thought you would be looking to see if you sprouted a CHEST HAIR yet :msp_scared:


ah, err... ahh hem... shouldn't you be looking to round up some parts for me?

after all, I have some stuff SITTING HERE collecting DUST with your name on it POKEY

 

[Nardoo]

Has anyone got a Husky 51/55 parts saw? I need:
1 x carb screw (holds carb to the intake block)
1 x on/off switch
1 x chain tensioner
Couple of AV bumpers

Happy to pay Paypal including shipping to me in Oz. Please be patient if I don't get back to you right away- the local telephone exchange is dying and I have to go into town to get internet connection. Oh the joy of country living.:hmm3grin2orange:

 

[axlr8]

nardoo......PM sent

 

[nstueve]

Now I need a muffler assembly for an 034/036.

make sure you get the right one!!! because some for the 036 wont fit an 034! you need a whole assy???i have the back portion from a 034 super?

I'll be needing a 034/036 muffler soon too... What determines whether they fit or not??? the chassis or the cylinder? I'm about 99% sure I have a 034 crank case but my cylinder is a 036pro... So which muffler would I need? I'd be interested in the 034 super muffler base if the OP isn't...

 

[ChainsawmanXX]

Brad,

ya getting one bored & chromed? I may have a decent 385 cyl... shoot me a PM, and I'll take a peek




I thought you would be looking to see if you sprouted a CHEST HAIR yet :msp_scared:


ah, err... ahh hem... shouldn't you be looking to round up some parts for me?

after all, I have some stuff SITTING HERE collecting DUST with your name on it POKEY

Yo fool I sent you a text message with pictures! I gatherd,parts for ya! Lol

 

[Mastermind]

I'll be needing a 034/036 muffler soon too... What determines whether they fit or not??? the chassis or the cylinder? I'm about 99% sure I have a 034 crank case but my cylinder is a 036pro... So which muffler would I need? I'd be interested in the 034 super muffler base if the OP isn't...

You will need to add spacers behind the muffler shell at the two lower mounting points. I have used 1/4 20 nuts that I drilled out....

 

[nstueve]

You will need to add spacers behind the muffler shell at the two lower mounting points. I have used 1/4 20 nuts that I drilled out....

10-4... So I can use a 034 or a 036 but will need to make spacers for a 034 to work? Sounds good to me!

Anyone working on Redmax and know what the top pump goes to? The pump on the bottom is my 3800 pump that I need to replace. Bought the wrong pump so wondering if anyone could use this one?

Does anyone have the pump and worm gear I need??? PN: 521586101 i've been told... Googled that part number and come up with a husky and redmax oil pump... Are they the same pump???

 

[fastLeo151]

I still am in need of a factory bucking spike for a 660 and a clutch cover.
Also need a 066 flat top cylinder


I have stihl parts and cash to trade

 

[AU_K2500]

Need some husky 45 stuff...
Chain tensioner. Need all the little bits.
M4x18 socket head
And two M6 bar nuts.

Sorry to ask for such little stuff. There are zero dealers near me.

 

[nmurph]

Does anyone have a 361 carb? I am a card-carrying member of the cash-for-parts relocation program.

 

[psuiewalsh]

Does anyone have a 361 carb? I am a card-carrying member of the cash-for-parts relocation program.

Your not going to fill it full of caustic liquid and crush it are you?

 

[srcarr52]

I'm looking for a pair of bow saw guards to put on a 22" brush bow. If no pair, then I'll consider a single guard. Thanks, Ron

If you give me the dimensions I could bend some up for you. .060" aluminum ok for material?

 

[rwoods]

If you give me the dimensions I could bend some up for you. .060" aluminum ok for material?

I can only give you the length and mounting hole locations. I think thickness varies from among guards but I believe they are all in the 1/8" to 1/4" range. They will also have at least 4 bends; see pictures at post #24: http://www.arboristsite.com/chainsaw/201506-2.htm Maybe I can get Mr. Bowsaw to measure for me. Ron

 

[Arrowhead]

Looking for 026 p&c!!!

Sorry Jacob. Storms knocked out my internet last Friday... just got it back.
I got a nice 026 jug you can have. It's very clean, but it has a small spot below the exhaust that's missing the chrome.
If I needed it, I'd run it. What do the rest of you think about this running it?
If you want it, let me know... I'll put it in the mail in the morning.

 

[ChainsawmanXX]

Sorry Jacob. Storms knocked out my internet last Friday... just got it back.
I got a nice 026 jug you can have. It's very clean, but it has a small spot below the exhaust that's missing the chrome.
If I needed it, I'd run it. What do the rest of you think about this running it?
If you want it, let me know... I'll put it in the mail in the morning.

No problem Ed.
I dont think it would matter much, especially being BELOW the exhaust port.

What does everyone think about a Forrester brand Piston for an 026? How is the quality?