the all aussie dribble thread!

[AUSSIE1]

Here I am and I remember nothing of any VISA ad Al? If it was funny I need to see it though...



The 576 will be retired soon Serg



More like a vaseline clad Barista

I was thinking along the lines of a level III Barista after his earlier influences!

Here you go -

http://youtu.be/TVOsBVDXSzc

<iframe width="420" height="315" src="http://www.youtube.com/embed/TVOsBVDXSzc" frameborder="0" allowfullscreen></iframe>

 

[tdi-rick]

I was thinking along the lines of a level III Barista after his earlier influences!

Here you go -

Visa commercial with Matt Harding - YouTube

<iframe width="420" height="315" src="http://www.youtube.com/embed/TVOsBVDXSzc" frameborder="0" allowfullscreen></iframe>

and obviously pre-ACL repair

 

[MCW]

I was thinking along the lines of a level III Barista after his earlier influences!

Here you go -

Visa commercial with Matt Harding - YouTube

and obviously pre-ACL repair

Hmmm. I'm a lot more nimble than I remember

Knees. Who the hell needs them.

Highly overrated...

 

[tdi-rick]

Well, if go all feral at Karate when the body is a little older......



(says the idiot that came off his mtb last year and had his shoulder take about four months to heal :monkey

 

[MCW]

Well, if go all feral at Karate when the body is a little older......



(says the idiot that came off his mtb last year and had his shoulder take about four months to heal :monkey

Yep. Jackie Chan I am most certainly not Lawn Bowls may be on the cards...

At least you're not as bad as this guy mate. He's in his mid 40's and only just bought a new dirt bike. He's a good mate with one of my chemical reps (who just bought a Hyabusa!). They've already told him he'll need a knee replacement over the next 5 years. He took a jump but somehow used his leg as suspension when he landed. Nasty stuff...

 

[Rudolf73]

Hmmm, I sense airport security may be a problem for you in the future Matt...

 

[tdi-rick]

Yeow.

That x-ray is worse than a mates who had a horse roll on his leg six months ago.

He can't go to church now either, the knee, she no bend.

 

[AUSSIE1]

Nasty. Dirt bikes will bite hard if you don't give them respect.

 

[MCW]

Hmmm, I sense airport security may be a problem for you in the future Matt...

Lucky it isn't me then

Nasty. Dirt bikes will bite hard if you don't give them respect.

For sure Al. Dirt - she ain't as soft as people think. Just like water...

 

[Rudolf73]

Lucky it isn't me then

That is great news! Yeah, I just reread it and realised it wasn't you... you're not into Hyabusa's anyway haha. I wouldn't mind the engine in an off-road buggy though - now that would be fun.

 

[billyj]

nooooooo. casey stoner has announced he will retire at the end of the current season.

ill be sad to see him go but good on him for going out on his terms while at the top of his game

 

[Rudolf73]

nooooooo. casey stoner has announced he will retire at the end of the current season.

ill be sad to see him go but good on him for going out on his terms while at the top of his game

Anddd the Wiggles are retiring... all in the same day :msp_ohmy:

 

[MCW]

Anddd the Wiggles are retiring... all in the same day :msp_ohmy:

Devastating. I can only hope that all of my Wiggles albums and DVD's will increase in value.

 

[Hulsty]

I'm new to the whole chainsaw thing, recently hit a hiding rock with my saw, chain would no longer cut through butter it was that blunt. Judging by the chips does this appear sharp enough now? Took me about 45mins of sharpening with a carlton file o plate to get it like this, should I keep going ?

Also I installed a HD filter kit to my Makita DCS6401, but I have now way of tuning it, tach is to expensive for me at the moment. I fattened the mixture a freckle but still want to check the max rpm. Anyone nearish to ferntree gully melb that has a tach I could borrow/come round to check the tune ?

 

[AUSSIE1]

nooooooo. casey stoner has announced he will retire at the end of the current season.

ill be sad to see him go but good on him for going out on his terms while at the top of his game

Yeah that's a real bummer. He want's to let Lorenzo back at the top!

Anddd the Wiggles are retiring... all in the same day :msp_ohmy:

Maybe Casey could be the new Wiggle. He certainly new how to wiggle the bike out of turns!

I'm new to the whole chainsaw thing, recently hit a hiding rock with my saw, chain would no longer cut through butter it was that blunt. Judging by the chips does this appear sharp enough now? Took me about 45mins of sharpening with a carlton file o plate to get it like this, should I keep going ?

Also I installed a HD filter kit to my Makita DCS6401, but I have now way of tuning it, tach is to expensive for me at the moment. I fattened the mixture a freckle but still want to check the max rpm. Anyone nearish to ferntree gully melb that has a tach I could borrow/come round to check the tune ?

Furntree Gully Aye? My old stomping ground back in the day. Used to live in Wantirna Sth and got up to no good in FTG and Boronia!

 

[MCW]

I'm new to the whole chainsaw thing, recently hit a hiding rock with my saw, chain would no longer cut through butter it was that blunt. Judging by the chips does this appear sharp enough now? Took me about 45mins of sharpening with a carlton file o plate to get it like this, should I keep going ?

Also I installed a HD filter kit to my Makita DCS6401, but I have now way of tuning it, tach is to expensive for me at the moment. I fattened the mixture a freckle but still want to check the max rpm. Anyone nearish to ferntree gully melb that has a tach I could borrow/come round to check the tune ?

Different wood species throw different chips so a bit hard to tell. Have you been dropping the height of the depth guages as well mate? The File-O-Plates are excellent for depth guage adjustment.
As far as your Makita goes a tacho won't help you tune it as the rev limiter kicks in at 13,500rpm. The ideal no load rpm is probably just above this. Best way to tune these saws is in the cut under load. If I was closer I'd certainly help. Why don't you come for a 7 hour drive up my way?

 

[deye223]

I'm new to the whole chainsaw thing, recently hit a hiding rock with my saw, chain would no longer cut through butter it was that blunt. Judging by the chips does this appear sharp enough now? Took me about 45mins of sharpening with a carlton file o plate to get it like this, should I keep going ?

Also I installed a HD filter kit to my Makita DCS6401, but I have now way of tuning it, tach is to expensive for me at the moment. I fattened the mixture a freckle but still want to check the max rpm. Anyone nearish to ferntree gully melb that has a tach I could borrow/come round to check the tune ?

this is pine as you know it is soft

 

[lumberjackau]

It appears to be a bit chilly on the set of Dances with the Stars

 

[Nardoo]

It appears to be a bit chilly on the set of Dances with the Stars

My wife watches each week but this is the first time I have got interested!

Al.

 

[lumberjackau]

Holy gumdrops batman :msp_tongue: