the all aussie dribble thread!

[460cixy]

You're not telling me 460 that Landrovers don't have issues.......are you ?

There got plenty just not chassis steering or suspension related. I mean its that good the japs had to copy the suspension to the point a gq front end in almost a direct bolt up swap not that you would because they don't flex

 

[chippy]

Call that a rig?

It's on the smaller side....50t rigged up.....big enough for my post holes

 

[chippy]

There got plenty just not chassis steering or suspension related. I mean its that good the japs had to copy the suspension to the point a gq front end in almost a direct bolt up swap not that you would because they don't flex

Electrical they are disastrous.

 

[Creeker]

Wow snowy, cutting kindling by any chance, best wishes for a speedy recovery.

Rawleighs Man and Beast will fix it.

I have drooled over those little axes for years but couldn't afford the $$'s.

 

[postrip]

Well the lights are on!..... Had to opt for my original 1st choice of the Hella Rallye 4000's,
As the xgt240's from lightforce required bar modification in order to fit correctly.
Just got 2 get home now to adjust them

 

[derwoodii]

Gas should be 600mm deep

should be yes,,, i knew what assets water power gas phone was near as site mops checked marked and even hand excavated to see things not shallow as often known to do so but pipe had floated or lifted by root growth to lessen than 200mm down

 

[derwoodii]

So, anyone else had a problem with there gransfors being "to" sharp???

View attachment 443547

oowww guessing you hardly felt the slice but after comes the occh

 

[Creeker]

Take the hat off to you for finding it derwoodi 10 out of 10 for that effort.

I'd be surprised though if a tree that big had roots that would lift anything from 600 deep to <200mm.

Had some welcome rain this week, nearly 30mm

 

[VinceGU05]

So, anyone else had a problem with there gransfors being "to" sharp???

View attachment 443547

done a good job. i thought i was careless enough when i chainsawed the top of my finger.. but thats takes the cake.

 

[WidowMaker_1]

Time for some red-neck-erizing. Double the ports, twin carbies, maybe some forced induction from the air compressor

 

[460cixy]

Electrical they are disastrous.

Both mine have been fine but most issues seem to turn up when clowns that have no idea cut and shut accsories in. One alt on the ute and a starter in the 15 plus years I've had it and I don't doubt they were most likely original. The wagon I haven't had to touch. Most other issues get blown right to **** by dick heads with no idea and believe every thing thre told normally fith hand from a mates cousins dog washers sisters mum who saw a land rover once. If the rubbish banded around was half true the **** would never leave the driveway

 

[2strokenut]

id get a land rover 130 over my gutlux if i had the coin

 

[chippy]

So, anyone else had a problem with there gransfors being "to" sharp???

View attachment 443547

Nail polish still intact. You'll be fine.

 

[VinceGU05]

Both mine have been fine but most issues seem to turn up when clowns that have no idea cut and shut accsories in. One alt on the ute and a starter in the 15 plus years I've had it and I don't doubt they were most likely original. The wagon I haven't had to touch. Most other issues get blown right to **** by **** heads with no idea and believe every thing thre told normally fith hand from a mates cousins dog washers sisters mum who saw a land rover once. If the rubbish banded around was half true the **** would never leave the driveway

same goes for the newer alfa's

 

[chippy]

Almost bought a 661 today without the bar or chain for $1700, but then dropped into Klika and had a good look at those diesel 50t splitters....

Looks like you have to be careful of the castings on the axe head.....a few cases of the uprights breaking off the lower sliding section that connects to the UC chassis beam...

Walked away with nothing but a pocket load of cash

 

[460cixy]

same goes for the newer alfa's

Lol the old ones were shockers I think sometimes they only had red wire and no other colors. And if you think Lucas is crook play with magnet marelli or vaugelire gauges

 

[Jimbo209]

So, anyone else had a problem with there gransfors being "to" sharp???

View attachment 443547

I've kinda done that with a fiskars x27

 

[derwoodii]

i pondered a 661 @ $2100+ with the $454 deal of oil lube and stihl jacket thrown in,, hmm the jacket was puffy unpleasant padded thing that some how costs RRP $300 hmm so take $300 off the $2100 i might bite

 

[Snowy01]

oowww guessing you hardly felt the slice but after comes the occh

Didn't feel a thing, wondered why my toes where wet.

 

[VinceGU05]

i pondered a 661 @ $2100+ with the $454 deal of oil lube and stihl jacket thrown in,, hmm the jacket was puffy unpleasant padded thing that some how costs RRP $300 hmm so take $300 off the $2100 i might bite

Should be able to do better deals than that.