the all aussie dribble thread!

[husq2100]

Don't panic yet, that engine is no where near run in yet.

Plenty of diesels consume oil initially, then it drops to eff all after about 20,000km.

so if its getting past the rings that would be okish at this stage due to not having full ring seal yet?

oh and check this video of my turbo if you get the chance:

HS International 2.8tgv VNT turbo leaking air - YouTube

 

[AUSSIE1]

Well what an end to the MotoGP!

 

[ozflea]

bugga me bob, there most be allot of races out there that I don't know of, I only know of two time a year that there is an 090 only race in qld, and haven't heard of any in northern NSW, where are the others located? If there are more I might have to get one of them u 'bute stihl oh nine oh's to go into my plant of saws

Well at one stage you used to keep me informed but but not any longer maybe i should call you secret Squirrel 2 maybe my interest in the 090 will generate a little jealousy and get a few out of mothballs or just maybe i'll have to fire up the ol china gal and travel north to terrorize the locals.

Have you seen the current Husky ad on TV Get the saw ands get the look well i hope the look isnt like a fag at the mardi-gras ..................

Proudly McBob

 

[Graham99]

so if its getting past the rings that would be okish at this stage due to not having full ring seal yet?

oh and check this video of my turbo if you get the chance:

HS International 2.8tgv VNT turbo leaking air - YouTube

Personally I would lift the head, the last thing you want to see is a valve go sliding down the guide into the piston. New head gasket is cheap insurance, and you can check the bores while the head is off.

Regards
Graham

 

[ozflea]

Well since you fellas are busy rabbiting on about truck and 4 wheel drives this ol fella will get this forum back on track where it belongs

McBob's New Chinese 090 for the visually standard class just got a little tidying up and shes will be started for the first time my second
090 is getting the header built for the pipe as i have multiple pipes to try

Andreas would be proud of me learning to build in Chinese

Who flung dung McBob.

 

[Rudolf73]

Well since you fellas are busy rabbiting on about truck and 4 wheel drives this ol fella will get this forum back on track where it belongs

McBob's New Chinese 090 for the visually standard class just got a little tidying up and shes will be started for the first time my second
090 is getting the header built for the pipe as i have multiple pipes to try

Andreas would be proud of me learning to build in Chinese

Who flung dung McBob.

Looking good McBob, only one little problem I see - there is a major air gap in the spark plug lead... it may be hard to start in this configuration.

 

[ozflea]

Looking good McBob, only one little problem I see - there is a major air gap in the spark plug lead... it may be hard to start in this configuration.

Not a problem i'll just stick my finger in the gap ............... the red light effect its called

 

[AUSSIE1]

Looking good McBob, only one little problem I see - there is a major air gap in the spark plug lead... it may be hard to start in this configuration.

That's a secret squirrel mod Rudi, just like backing off the chain to reduce drag! :msp_thumbup:

 

[Rudolf73]

Oo look what I got in the mail today - this will have to go straight to the pool room :jester:

 

[AUSSIE1]

Oo look what I got in the mail today - this will have to go straight to the pool room :jester:

Hmmm, that's a work of art Rudi. It's too nice to use it to cut wood and knowing me I'd leave it behind somewhere! :msp_unsure:

 

[Bigdgb]

Oo look what I got in the mail today - this will have to go straight to the pool room :jester:

top thing Rudi, I got one, use it all the time.

 

[deye223]

Oo look what I got in the mail today - this will have to go straight to the pool room :jester:

hey rudy how heavy is the head and how long is the handle

 

[AUSSIE1]

Bluddy ell, I've got to go to Melbourne in the morning for a one day course for the NBN two way satellite. Leave at 5:00 in the morning and get home at 8-9pm tomorrow night.

 

[splitpost]

I also have a Jonsedreds.

Nope, haven't cut with that orange puppy yet.

spam off ya spammin spamwit,your oldman shoulda spammed ya up the wall,spamm off

 

[Bigdgb]

Well at one stage you used to keep me informed but but not any longer maybe i should call you secret Squirrel 2 maybe my interest in the 090 will generate a little jealousy and get a few out of mothballs or just maybe i'll have to fire up the ol china gal and travel north to terrorize the locals.
Proudly McBob

I think the northen Locals will be safe,:hmm3grin2orange: but you will most likley get some reaction from the little birds in your backyard if you get it going:msp_tongue:

 

[Rudolf73]

hey rudy how heavy is the head and how long is the handle

2.21 lb. and 24"

 

[splitpost]

sorry guys,just fed up with these clock heads

 

[lumberjackau]

Well at one stage you used to keep me informed but but not any longer maybe i should call you secret Squirrel 2 maybe my interest in the 090 will generate a little jealousy and get a few out of mothballs or just maybe i'll have to fire up the ol china gal and travel north to terrorize the locals.

Have you seen the current Husky ad on TV Get the saw ands get the look well i hope the look isnt like a fag at the mardi-gras ..................

Proudly McBob

Plenty of 0 9 oh's around there ridges here that come out for this 090 only race, it is a memorial race for a local cutter that loved his 090 and worked it everyday and would come to town for the show and race and would win. He was a well respected bloke and having this memorial race in his memory is a testimony to the respect everyone had for him, that is why there has been minimal modifications to most saws in that race. Running a chingaling-dingaling copy would be just disrespectful to the honour of ol mate.

Just my 2 cents

Will

as for the mardi gras reference bob, wtf, sorry, I don't see much telly these days, to busy working

 

[ausneil 1]

sorry guys,just fed up with these clock heads

spot on mate, they can f#ck off if they can understand that.

 

[deye223]

2.21 lb. and 24"

short handle is why the head looked so big and it don't have any of these