I have to stop my flea market experience long before $1200...
Today’s haul
- Thread starter joe25DA
- Start date
Help Support Arborist Forum:
The BG 55/65 are great. I’ve had one for years. I only use my big Redmax in spring and fall. I use the Stihl on all my lawns.
I can't make out what exactly these blowers are...BG...something
Looks kinda like a 25 or 35.
What else should I look for?
Looks like you got 4 x BG86 and 1 BG65 or 85
Very simple to work on
The FG2 has hardly had any use. The red chain vice (Oregon?) is old but solid. I think it will be the most useful of the pair.
More today. Nothing too exciting. Picked these up from an old timer I used to buy saws from years ago. On the way home, the little wonder was a roadside find. Pick of the day and likely the only machine that I’ll keep
3400, 2000, 350, 455, 235, 400evil, holiday (2), 50 and a 36.
3400, 2000, 350, 455, 235, 400evil, holiday (2), 50 and a 36.
Didn't see a place for this... New... but the pivot point was welded on in the wrong position such that when vertical it lifts the wheels about 3" off the ground. It was "lost" in the warehouse for a number of years... $500! So far I split about an 1/8 cord of oak to try it out... Relocating the pivot point is anticipated in the future.
Husky77
ArboristSite Operative
Some folk get all the luck, I been looking for a chain vice for years. They rarely come up for sale in uk and when they do they sell on ebay for crazy price
Very nice!
Lots of operators never use the vertical position or just rarely when they forgot to noodle cut a big round in half. Not sure you have to change anything, Griz.
041041
266SE
SHINDAIWA 680
All have great compression. Used but not beat. The old timer said “come get these saws I’m tired of trippin on the damn things”
Thus far I haven't done anything with the pivot. However, I keep ending up with large oak and maple trees that at a minimum need to be halved by noodling. The last big oak had to be quartered... this as the rounds were 4-500 lbs based on calculations and tables. I cannot pick those up.
I've used it vertically by putting some slab wood under the tires and chocking them... Thus, moving the pivot point would be handy in use, and it would allow the tab to drop into the slot in the top of the I-beam so it can be secured for transport.
I picked up a trailer dolly so I can move it around easier and plan to get a table for it. It was a good buy... no regrets.
Not bad. I've been asking 700 for mine but not really trying too hard to sell it, still have a big tree or two that might need cut down.
Just dig a 3" hole.Thus far I haven't done anything with the pivot. However, I keep ending up with large oak and maple trees that at a minimum need to be halved by noodling. The last big oak had to be quartered... this as the rounds were 4-500 lbs based on calculations and tables. I cannot pick those up.
I've used it vertically by putting some slab wood under the tires and chocking them... Thus, moving the pivot point would be handy in use, and it would allow the tab to drop into the slot in the top of the I-beam so it can be secured for transport.
I picked up a trailer dolly so I can move it around easier and plan to get a table for it. It was a good buy... no regrets.
I have a splitter similar to that. Almost never use it vertically. So hard to maneuver the rounds to split them vertically (you usually have to keep nibbling at the edges till they get smaller and smaller) that it is easier to noodle them.
I tried taking pieces off the edges initially, like I would with a splitting axe, but the chunk stayed too heavy for too long. Now I use a hand truck to get the big halves/quarters over to the splitter. Then I immediately split the piece in half and work each half separately. That gets the chuck down to a manageable size quickly and doesn't wreck my back. It's also faster and cheaper than repeatedly noodling.
Are you talking about the Stihl FG 2
would some taller wheels be your solution?Thus far I haven't done anything with the pivot. However, I keep ending up with large oak and maple trees that at a minimum need to be halved by noodling. The last big oak had to be quartered... this as the rounds were 4-500 lbs based on calculations and tables. I cannot pick those up.
I've used it vertically by putting some slab wood under the tires and chocking them... Thus, moving the pivot point would be handy in use, and it would allow the tab to drop into the slot in the top of the I-beam so it can be secured for transport.
I picked up a trailer dolly so I can move it around easier and plan to get a table for it. It was a good buy... no regrets.
Abbeville TSI
ArboristSite Operative
Nice looking Wheel Horse!
