is it me or is he standing on the power lines :monkey:
I leave those to the coop guys. I'll clear to the pole but that's it. I had a friend I used to work with who got electrocuted doing storm work when he stuck his saw into a tree that was on a hot line that was supposed to be dead.
And then there's the line workers who get popped because a HO's generator sends juice back up an inert line. That guy might have made sure the grid was down before bozoing it, but like MD said, a "supposed to be" can be fatal. Someone throws a switch blocks away and you're a #####ed duck. Sit down and talk for a few minutes with someone who has been zapped with lightning or amps, and you'll have a lot more respect for electrical current. IMO that guy is a clown, allbeit, one with a big set of cajones.
He looked like a rather competent utility worker using the POS rear handled saw the company gave him.
What I don't understand is why he didn't buckstrap to the line he was holding onto and use two hands to hold that chainsaw.
Another option would have been to hang a second climbing line from the unseen tree to the left that was used to lower the limb when it was cut loose.
service wires dont hold alot of weight. communication lines hold even less. if noone was around and the power was off, i'd have just stood on the stag and cut the broken piece off, or basecut it. power company's coming back to fix lines anyway, right? better than risking a fall like that. you call ME a hack? lol
And then there's the line workers who get popped because a HO's generator sends juice back up an inert line. That guy might have made sure the grid was down before bozoing it, but like MD said, a "supposed to be" can be fatal. Someone throws a switch blocks away and you're a #####ed duck. Sit down and talk for a few minutes with someone who has been zapped with lightning or amps, and you'll have a lot more respect for electrical current. IMO that guy is a clown, allbeit, one with a big set of cajones.
Nah, that big fat wire at the bottom is pretty tough as long as what its attach to is too.
Now, who called you a hack... this time?
well idk where that is, but around here the service wire is above the communication wires. the service is a fairly stout diameter (1/2" or 3/8") cable spiraled with insulated power cable. but the tension wire is only held taut by a 1/8" clip thingy. i've had those break from just slapping it with a rather small branch, or tear off from the house. the communications underneath it are far weaker, phone and cable.
Telephone lines like the one in that vid. are very strong. I have worked storm work and seen it, a few times. The primary (high voltage) is just aluminum with one steel wire inside, same with the neutral, thats the wire that hangs below (primmary is always on top).
Anyways, I have seen every line broken, except for the tel, even seen the tel ripped off the pole and stretched out for spans, holding up a big tree about a foot off the ground. When you buck it loose, watch out! The tel will take your head off. It goes back up with a whoosh, throwing a log way high.
That is the truth, even if it comes from a utility hack.
He looked like a rather competent utility worker using the POS rear handled saw the company gave him.
What I don't understand is why he didn't buckstrap to the line he was holding onto and use two hands to hold that chainsaw.
service wires dont hold alot of weight. communication lines hold even less. if noone was around and the power was off, i'd have just stood on the stag and cut the broken piece off, or basecut it. power company's coming back to fix lines anyway, right? better than risking a fall like that. you call ME a hack? lol
Enter your email address to join: