West Central Ohio GTG

[Mastermind]

Sounds like a great idea, GTG at Bonnaroo!!!!!

Bonaroo?!?!? That brings back nightmares. I got caught in the traffic for that years ago on 24. What a disaster.

The only smart way to attend Bonaroo is to work at the show........

 

[Speed]

I don't doubt that a bit.

 

[birddogtg]

550

Do you want me to bring the 550 to try out? Its stock (or real close to it). I didnt know if you had the chance to run one yet.

I have run one but it was stock, bring it with you

 

[Majorpayne]

Anyone have any big Echo bars? Got the new clutch spring in the JD 800V (Echo 8000) that LowVolt brought to the Indiana GTG but it only came with a 16" bar. The Echo dealer wants $93 for a 28" bar, that is worse than Stihl. If anyone has one 24" or more they want to part with I would appreciate you bringing it along.

Edge and Engine has a good price on bars.

 

[young]

Anyone have any big Echo bars? Got the new clutch spring in the JD 800V (Echo 8000) that LowVolt brought to the Indiana GTG but it only came with a 16" bar. The Echo dealer wants $93 for a 28" bar, that is worse than Stihl. If anyone has one 24" or more they want to part with I would appreciate you bringing it along.

why not get a Oregon bar?

 

[Officer's Match]

Listening to Warren Haynes in the shop.........getting my mind right for Bonaroo!!!!!!

My son is still raving about the set Alice Cooper put on there last year. He ended up going all the way to Cadot, Wisconsin to see him again a month later.

 

[cpr]

Speaking of pulling, I heard Andrew did good the other day.
As far as the other thing, I want to get some things solidified before making a announcement. Sounds like it will be well received. We need to put our heads together and come up with a plan.

Sure did with a good (lucky?) track read. Would've held but for Gary and Darrin's experience.

Let me know what I can do on the show.

 

[ELECT6845]

Anyone have any big Echo bars? Got the new clutch spring in the JD 800V (Echo 8000) that LowVolt brought to the Indiana GTG but it only came with a 16" bar. The Echo dealer wants $93 for a 28" bar, that is worse than Stihl. If anyone has one 24" or more they want to part with I would appreciate you bringing it along.

I think I have a 24" that came off a 610evl.

 

[blsnelling]

For anyone that's interested, I'll be bringing three MS261s. One is fully modded. One has the cylinder base cut to tighten the squish, the muffler modded, and the ignition advanced. The other is brand new, but might get a MM. I'm thinking it would be interesting to see the differences.

 

[Speed]

Let me know what I can do on the show.

I nominated you as chairman of that committee. You're in charge. :haha::haha::big_smile::big_smile:

 

[cpr]

I nominated you as chairman of that committee. You're in charge. :haha::haha::big_smile::big_smile:

So it is written, so let it be done. My first proclimation as delegator-in-chief is for you to get me a glass of water...
:jester:

 

[Speed]

So it is written, so let it be done. My first proclimation as delegator-in-chief is for you to get me a glass of water...
:jester:

Water? You know what fish do in water, right? :msp_w00t: Or did you want that properly distilled and combined with barley and hops?
Heck, I don't even know where you moved to, but it is too far away to get it there in a respectable amount of time. You may want to get it yourself. You'd be REALLY thirsty by the time I get there.

 

[cowroy]

If any of you Poulan lovers that are coming has a Poulan CV series piston pin press that you could bring, it would really help me out. I have tried to make one without success, and have given into buying one but I have been way too long fulfilling some promised parts.

 

[OhioGregg]

If any of you Poulan lovers that are coming has a Poulan CV series piston pin press that you could bring, it would really help me out. I have tried to make one without success, and have given into buying one but I have been way too long fulfilling some promised parts.

If the tool your needing is for the 3400/3700/4000 series saws, I will bring it along. That is, if my memory will cooperate. :msp_ohmy:


Gregg,

 

[blsnelling]

Three more work days. Time to file some chains and top off the fluids.

 

[cowroy]

If the tool your needing is for the 3400/3700/4000 series saws, I will bring it along. That is, if my memory will cooperate. :msp_ohmy:


Gregg,

I would greatly appreciate it Gregg :msp_thumbup:

 

[RedneckChainsawRepair]

Al Smith is on the list elsewhere as going. :msp_thumbup:

 

[RedneckChainsawRepair]

Anyone have any big Echo bars? Got the new clutch spring in the JD 800V (Echo 8000) that LowVolt brought to the Indiana GTG but it only came with a 16" bar. The Echo dealer wants $93 for a 28" bar, that is worse than Stihl. If anyone has one 24" or more they want to part with I would appreciate you bringing it along.

I run husky large mount bars on my JD 800V / echo 8000. :msp_tongue:

 

[Officer's Match]

Three more work days. Time to file some chains and top off the fluids.

Nahh, the chain will be rusty and fuel stale by then. :msp_sneaky:

 

[LowVolt]

T-Shirt Design Approved.....