How do you like those premium light bars? Been interested in them myself.Some of my favorite,View attachment 1205901
What's on your bench
- Thread starter chainsaw _ crazy
- Start date
Help Support Arborist Forum:
There nice, but over 28” , they tend to get a little flexy in the 32-36 “ if ur bore cutting much, The older model is stiffer.
My bench is currently loaded with almost 1000 223 cases I'm reloading. Never have enough... Then it's on to 338 Lapua's, 460 S&W's, 44Mags and 308's.
and no, I don't own a black gun either....
and no, I don't own a black gun either....
They on par with Stihl light bars? Weight wise I mean.
I hear ya. I lost all my pew pew’s in a boating accident…
There very close, but I think ES edges them,Tsumura makes a good quality bar ,
decided to replace the lead wire on the 010AV. some interesting things. to remove the flywheel, there are no screw holes or internal threads to anchor a puller. I looked at the service manual and they have a special puller that is basically a long nut that threads onto the end of the crank shaft. it says to thread it on, back it off 1 turn, hold the flywheel with 1 hand and hit the end of the tool. basically, they're saying to hammer on the crankshaft. something I've never wanted to do LOL. the tool is long because the flywheel has a deep well where the crankshaft is. at least the threads are taking the blow and not the end of the crank. made my own tool and it worked, came right off.
the other thing though, is the flywheel keyway. have never seen anything this bad. wonder if someone was trying to change the timing? that or they just F'd it up. the flywheel was actually rubbing against the stator or whatever it's called where you set the air gap. not sure how it was even running.
