what's the weirdest thing you have used a chainsaw for ....

[jughead500]

There was this one time at band camp............

 

[Haywire Haywood]

I used an 066 with a 36" bar to trim the hedges once.

 

[Knobby57]

A friend of mine use a old crappy john dear to trim part of his knee cap . He seemed more upset about his new pants


Sent from my iPhone using Tapatalk

 

[RP81]

Friend's I grew up with used a electric chainsaw filled with canola oil to assist in butchering cattle

 

[Gypo Logger]

I used an 066 with a 36" bar to trim the hedges once.

Isn't there a vid of a guy doing that?

 

[ChoppyChoppy]

I've done a fair amount of "finish carpentry" with a saw. I guess I must be pretty good cause it comes out pretty good usually. Take that Bob Villa!

 

[SS Sniper]

Isn't there a vid of a guy doing that?

This one? And the second video is the same guy. He's got quite the imagination to say the least...

 

[user 123755]

Cutting rafters to remove a roof in one pieces. Used an ax to chop a line around the roof, (1x6's spaced for wood shingles.) Pried off the last two 1x6's. Cut two holes on each side. Hired a crane and hooked it up through the holes with 4x4's and chain. Lifted the roof off.

Doug in SW IA

 

[BeatCJ]

Sorry to be a tease, but there is a HIPPA violation involved.

 

[kyle.kipple]

My gas gauge in my 95 Chevy is funny sometimes. Long story short, I ran out of gas about a mile out from the gas station. I had dads 55 rancher and my ms261 both had roughly 3/4 tank full of mix. Made a funnel out of an empty pop bottle blew my mind that little bit actually sputtered me to the pump. 350 small block does not like 40:1...


Sent from my iPhone using Tapatalk

 

[RYNOMAGNUM]

Built a remote hunting cabin.

Played "the lumberjack" by Jackyl on several occasions at bonfires and campfires.... maybe once or twice in the living room.

 

[ford4500]

Roughed in a dish washer for my wife, she couldn't figure out were the wood chips under the refrigerator came from.

 

[gregn]

I've sliced rd bales of hay with saw to be able to run threw the hay chopper

 

[gary courtney]

trotline weights

 

[jcouch]

Works for watermelon to

 

[Gologit]

Scrap metal. Years ago a company I was working for had a whole pile of dead Macs, Homelites, Pioneers, and Partners out behind the rigging shop. Mostly big saws.
The saw boss got tired of looking at them and we hauled them to the dump. Made a whole pickup load and we got ten dollars for the bunch.

You old-time saw collectors may now have a collective primal scream.

 

[ttyR2]

Cutting ventilation holes in a roof with a lovely fire rolling underneath. Not terribly safe and the reason that most FD's don't do vertical ventilation much anymore unless absolutely required.

 

[Mike-M]

I use my beater poulan to re-groove tires for "off road only" use.

 

[jughead500]

trotline weights

Stihl 029 series or mcbricks? Lol

 

[jughead500]

Scrap metal. Years ago a company I was working for had a whole pile of dead Macs, Homelites, Pioneers, and Partners out behind the rigging shop. Mostly big saws.
The saw boss got tired of looking at them and we hauled them to the dump. Made a whole pickup load and we got ten dollars for the bunch.

You old-time saw collectors may now have a collective primal scream.

That was....just......just.......wrong.