Where's Gypo Bucker?

[Dennis Cahoon]

Gypo Bucker, where have you been? Some people here think you have a big mouth, but I enjoy it. Don't tell me your building another 346 either! I'm starting to catch up to you on posts, you know! The best thing you could do right now, is go regrind that handfiled west coast chain you have and challenge old DB to a race. Do you think he'd show up? My money's on you, but only if you regrind that chain. Good luck! & Happy New Year! Instigator Agitator

 

[rahtreelimbs]

Gypo is off looking for the crying towel. He knows he will need it when he goes up against one Dan Henry's Power Ported monsters!!!

 

[ehp]

Hey Dennis Gypo is alive i had a phone message from him telling me that he has got a faster 3120 than i do , he bet me 5000 usa dollars on that so i will need your help to win, now let us see 5000 usa dollars that would be just under 50000 canadain , yep i need your help, he said he got one of your narrowed chains and it cut unbelieveable , what is up with that 1/2 chain you gave him, you would not give any to me.Plus i think Gypo is trying to find bearings for his front axle on his deere john

 

[rahtreelimbs]

Originally posted by tfj
Hope he is as fast as you say with his power poop saws because Gypo . Has one of ehp's saws and one of my chain's that he bought from me . soo best of luck to dan

We are talking woodsaw to woodsaw. Not a nitro driven steriod machine.

In all seriousness, woodsaw to woodsaw I think one of Dan's saws would give it quite a run for it's money!

 

[WoodTick007]

Where's Gypo

I think he took the logging truck through the drive-thru at Tim Horton's and got stuck. He walked from Tim Horton's to Canadain Tire where he bought a pocket knife and a hand tire pump. The knife was to cut holes in the tires of the trailer and the pump was to refill the tires once the deflated tires created the additional clearance required to free the truck. The last I saw him he was filling the tires.

So, he will be back on here very soon!!

 

[ehp]

We are going to see if i am smart enough to build a woodsaw or not , i may be not that good you know but we are going to see
just hope your timing finger is fast , you are going to need it

 

[Marky Mark]

What we need to do is get the Ken Dunn piped 346 and get my Piped 346 and run the 2 neck and neck. then we can take the other 346 that Ed is doing for john and run that one.

Since I have to prove I can use a chainsaw I had a 346 built by a ducati Builder it's piped and ready to kick all your butts since it will have Tommy fales 404 on it.

You people are so intune, Lambert sold the Holstien with madcow disease and now he back peddling in paper work.

 

[ehp]

ya but John has got a real fast 3120 that he built , honestly.
he tells me that he is going to kick my ass up the down the log .
So i have to believe he has got one , he said my 346 takes longer to cut one cut than his does in 3 cuts so that is fast
i am trying to get a faster one but so far know luck, ha can i but a pipe on my stock 346 and play with you guys , yes i mean a 346 with no porting

 

[Gypo Logger]

Hi Dennis, I'm still alive and kicking. Been busy with the holidays and building a trail for my last woodlot owner, down, up and across a river valley. The woodlot owner just loves me, his property looks like Cathedral Grove on Van. Is.
Anyway, he brought his two daughters into the woods to see my handywork, just as I slid sideways with my Kabota against 3 cedar trees. They witnessed me on top of the cab falling the offending trees.
Of course I made it seem like I was Hurcules and played it down by saying it was "just another day at the beech".
When it appears you are putting your life on the line, then you can get away with anything I find.
After chopping my tractor out, I got hung up on a high stump, chopped myself out again, then got stuck in the river, but it was no biggy, I just clawed my way out with the loader.
Thanks to our friend Ed, I wont have to worry about such technical situations, as Ed is helping me with the bearings in the front axle of my JD540A cable skidder.
Doug would never race me, he has seen first hand how fast I am with a saw. Doug, remember when Rotax and I raced against Gerry Gingrass? Also do you have a picture of "caveman" from that same race, Ed should be able to identify who it is.
John

 

[Gypo Logger]

Hi Ed, ya I got this 3120, but I am not at liberty to say where I got it from. It's a stroker that runs on alcohol and will out cut any Rotax. I think its a Fales chain, not sure though. I have a movie of it but cant send it for Mark to upload cause my system is fookulated.
John

 

[ehp]

Gypo i thought you said you built that 3120 , now i am really scared, who built it KD , DENNIS C. TFJ .. OR DOZER DAN , i think i will stay home , icannot compete with you now, you are just untouchable

 

[ehp]

ha find your parts book you will need it, those bearing cup as you put it is the bearing race that you need .
so when you order those bearings make sure you order the races to, it would not hurt to get a new shim to , you know the brass one we took out , i will bring some tools this time ok

 

[Dennis Cahoon]

John, good to hear your still alive and kicking. Good logging cover-up story, but I know your really clear up to your eye balls trying to hide your envolvement in the Mad Cow Disease. Are family doesn't hold you personally responible, but of course we just eat venison. I didn't give the Center for Disease Control any more information than your name and the dates you visited Rotax Robert in Washington this fall. Good luck on getting the great 346 race going after the first of the year! Sounds like there's a lot of interest from all walks of the chain saw world. Dennis

 

[ehp]

up here we donot call it mad cow , but when the cows start acting weird it just gives us something else to hunt, it makes it a little more fun

 

[Dennis Cahoon]

ehp, sounds just like hunting in California. People are the best animal to hunt in certain areas of this great state.

 

[Marky Mark]

Hey Lambert get ready since this is the guy who you will have to beat. I feel better having someone else run my saw. I can feel like I am part of a monster mudder pit crew.I'll do all the PR work and have the rest of the posse do the work.

Like any good team I will need some sponser clothing. Hey how about "Team Chronic 420"

Ed, since everyone kisses your azz now and wants all your info for free, how about I take you hunting in Texas next month on the Kings Ranch. We can hunt, have some good eats and then you can give me all your little tips and such. Plus if you act now I don't know much about anything you'll be in good hands. Don't forget to bring your files and .404 chain. Better yet since I don't know you I will just send you an email and you can give me your info via the internet. It's more personal.

 

[Dennis Cahoon]

Marky, I'll file any kind of chain you want if you take me hunting in Texas, but you have to take me hunting first, then I'll file you the chain. Dennis

 

[ehp]

bot now that is a pipe
how much for one? i have got a new garden hose to fill my carb, it should only take a little more fuel than my pipe but it will make good torque i am sure of that
hunting , i love to hunt ,deer moose , women , i can hunt then because there is none at home right now, but piss on the snakes
they seen to hunt me but i am listening to you on deer hunting you have my att. and my ears are open

 

[ehp]

yes i have let a little information out but not much
there is alot left , but just the important stuff like pipe dwell, taper header , baffle cone angle and that is just the pipe ,then we have port timing , width of the port , head , and the big one the carb but not much , i am sure you guys will figure it out real soon, then i will be looking to you for help but remember i am still listening to that hunting trip

 

[ehp]

Gypo how big of a boat do you have , i could use one soon if this weather doesnot straighten up, nobody logging today that is forsure , let me know when you get the parts so we can put it back together and start skidding a 100,00 ft per week of that high grade tree . now we are talking money
so lets see you get $14000 per 1000 board feet so times that by 100. god ???? Gypo that is 1,400,000 dollars a week, you would only have to work 6 months of the year at that rate