Thank you!
Why I wear my chaps
- Thread starter Patrick62
- Start date
Help Support Arborist Forum:
I have to work in shorts except in the winter. I have noticed that chaps keep sawdust out of my boots, keep bugs off the front of my legs, and prevent weeds from cutting me up.
I reckon you owe it to yourself to give proper trousers a try. As mentioned before, there may be sticker shock involved, but they're a world of difference to chaps or "cheap" trousers.
I've never worn snow pants, but the trousers I have are just like wearing thicker work pants. Not too heavy, not too bulky and allow me to happily traipse through the bush over all sorts of terrain no worries. Don't do climbing but I can't imagine they'd restrict your movement.
I've never worn snow pants, but the trousers I have are just like wearing thicker work pants. Not too heavy, not too bulky and allow me to happily traipse through the bush over all sorts of terrain no worries. Don't do climbing but I can't imagine they'd restrict your movement.
The climbing I have done with a chainsaw involved, is about the ONLY time that I don't bother with chaps.
There is a lot more risk involved than the chaps would ever cover. Just gotta be sensible.
one handing a top handle saw, I am more likely to gash a forarm or chop my head off.
Im not climbing in a speedo... just kidding.
I don't see the logic. climbing a tree using a 150T saw, gaffs and saddle. Steel core flip line. Knocking branches off until I can top it off. Saw isn't gonna be anywhere near my legs or torso...
I suppose one could wrap chainsaw pants, or chaps around my arms...?
Years ago there was a time doing electrical work on a pharma plant, OSHA required a harness and lanyard be used if on a
ladder 8 feet or higher. The lanyard was 10 feet long. Thud.
I went for my annual physical last week, Dr was showing me
His knee, went right across it with a chainsaw, 18 stitches. He said he always wears chaps.. except this time.
His knee, went right across it with a chainsaw, 18 stitches. He said he always wears chaps.. except this time.
Some of the climbers like the dexterity of the better chainsaw pants. And they don’t have to put chaps on when on the ground.
Philbert
Philbert
Went chapless about 2 years ago. Bought myself a pair of PPE pants. I really wanted Cloggers but boy are they pricey but, then again what price can you put on your leg or your arm.
I found the chaps to be too bulky always catching on brush or slash
I found the chaps to be too bulky always catching on brush or slash
I wonder what Scottish sawyers wear?
Philbert
Philbert
I like the thickness of the chaps when digging into brambles. Today I was stuck in hard enough that they were pushing in behind the chaps and still spearing me.. so I totally buy the argument for full-on pants for those special occasions.
Oh yeah and btw, f' the ancient rusty trodden down fencing wire lurking in amongst the brambles just eagerly waiting for the chainsaw to pass too close.
Oh yeah and btw, f' the ancient rusty trodden down fencing wire lurking in amongst the brambles just eagerly waiting for the chainsaw to pass too close.
kickert
New Member
That is my story too except it was only 17 stitches. Chain wasn't even moving. I was cutting storm damage and misread tension on a branch. Thought it was going to go away from me, but instead came back and down when it released. I have great muscle memory and got the chain break on before it hit my leg. Just the pressure of the limb on the bar pushed the teeth into my leg and back about an inch. Can't imagine what that would have looked like if it was running.
Chainsaw Pete
ArboristSite Member
Has anyone tried Zelarman brand of chaps? What do you think of them? They are Amazonium chaps, so in my mind, of questionable quality until otherwise recommended by folks I trust. These are 8 layer, I recently bought a Forester brand pair of chaps* from Amazon for about the same $$ that feel to me to be very thin. I have to wonder about the protection. The Forester chaps are 6 layer (I think) and have all the appropriate UL and ASTM certifications, as well as meeting OSHA standards for Class B protection.
*Have not worn them yet, and still within return period.
*Have not worn them yet, and still within return period.
Chainsaw kilts, but the long style that goes down to the ankle. Not the short sexy ones. Probably wear the sporran around the back so it doesn't get in the way.
Always love the “I don’t wear PPE. I used a chainsaw for XX years and never been injured”. That’s what every joker says until the day he gets injured. Injuries do not happen all the time but they just have to happen once to screw up your life, or end it. But to each their own.
