Wood splitting advice - DIY solution?

[stole]

Hi.

Looking for advice on a wood splitter or other solutions to increase efficiency without breaking the bank.

Short intro, we have underfloor heating by wood stove. Honestly not a 100% sure how much wood we use in a year, but somewhere between 2-3 cords I'm guessing.
Firewood access : At a family members place we just took down a 42m (137 foot) hemlock. The diameter at base is about 130cm (51 inches), and 10 meters up it was still around 90 cm (35 inches). Further up splits into 3 sections.
Work method: I've been using 37cc 14" chainsaw cutting sections that I'm able to load onto a trailer, then bringing it home to split with a splitting axe. There is a small chance that we will move in some years (hopefully not), so I don't want to invest a fortune into equipment. That said, although I love physical work I definitely need to reduce the work load in the long haul.
Steps to increase efficiency : I have a 62cc 20" chainsaw coming my way for a good price. I need an efficient wood splitter. I'm not a mechanic, but fairly handy and have been working as a commercial diver for 15+ years. At work I have access to welding/machining equipment. We have a hydraulic power pack that is sporadically used , that I could probably borrow on the regular, so I'm considering doing a DIY standing wood splitter along the lines of this splitter. The power pack is rated 38lpm (10 gpm) at 140 bar. Does anyone have any comparable practical experience if this would be sufficient? Any tips on hydraulic cylinder? If there is some other solutions I should look into, any tips is valued.

 

[promechanic]

Realistically, you should be able to buy a good used splitter, possibly even a new one for less than you would have into building something functional like you describe. Unless you have most of what you need on hand already, you won't save money building a basic splitter.

 

[Kevin in Ohio]

I have to agree with Promechanic. Buying a premade splitter would normally mean a better resale value if you evr get put of it or upgrade. One thing I would suggest is to run several different types of splitters before commiting to a certain design. I did build my own after running others. You can get experience by offering to help someone when they are having a split day. I learned quickly that uprights weren't for me as the constant leaning over would get to me, Same with 3 points on the ground. No one can tell you what best suits you, so you need to narrow it down before investing time and money. This is even true if you do decide to build.