Sold XS 572xp

[Colonel428]

I hate to do it but I'm going to sell my 572xp Kevin built. I had it hooked up by a dealer recently and everything is good diagnostics wise. Saw has 46 hours on it. I have a MMWS 592xp and an XS 500i that suit me more for the type of saw work I do. That's why I'm selling it because I just don’t use it or need it. It's a very strong, aggressive saw like all of Kevin's saws. The front lower recoil cover screw doesn't tighten as snugly as I'd like but I used blue Loctite on it and it's stayed in. You will definitely want to use the decomp button EVERYTIME you pull the rope. I've gone through 3 or 4 starter pullys on it due to the catch prongs bending or breaking off. Ive got a few I will include. It's a good saw. I'm definitely not trying to unload a problematic turd on somebody. If you buy the saw and think I've misrepresented something please let me know and I'll do my best to make it right. I'd like to get $1,100 for it but am open to offers. No trades please. Thanks, Steve.

 

[Colonel428]

The piston does have one single line scratch as shown. I reached out to Kevin and he didn't think it presented a problem. Certainly doesn't effect how the saw runs.

 

[Colonel428]

 

[Joseph W Santora]

For those of us less informed. What does "Kevin built" mean? Like what was done to the saw.

 

[Jacob J.]

For those of us less informed. What does "Kevin built" mean? Like what was done to the saw.

@huskihl (Kevin) does machine and port work on modern saws and is very much sought after. Last time I checked with him, he was backlogged about six months.

 

[huskihl]

I believe this is the saw from when I ported it. If not, they’re mostly the same and it would run very similar. If anyone has any questions feel free to ask

 

[Colonel428]

I believe this is the saw from when I ported it. If not, they’re mostly the same and it would run very similar. If anyone has any questions feel free to ask

Thanks for posting this Kevin, and for all your help along the way.

 

[Logger nate]

I have had a XS 572 for awhile, never use decomp (replaced with plug) and still has all the original starter parts. You must be stronger than me, lol.
Nice saw, Kevin does great work, GLWS.

 

[Lanedrew]

I hate to do it but I'm going to sell my 572xp Kevin built. I had it hooked up by a dealer recently and everything is good diagnostics wise. Saw has 46 hours on it. I have a MMWS 592xp and an XS 500i that suit me more for the type of saw work I do. That's why I'm selling it because I just don’t use it or need it. It's a very strong, aggressive saw like all of Kevin's saws. The front lower recoil cover screw doesn't tighten as snugly as I'd like but I used blue Loctite on it and it's stayed in. You will definitely want to use the decomp button EVERYTIME you pull the rope. I've gone through 3 or 4 starter pullys on it due to the catch prongs bending or breaking off. Ive got a few I will include. It's a good saw. I'm definitely not trying to unload a problematic turd on somebody. If you buy the saw and think I've misrepresented something please let me know and I'll do my best to make it right. I'd like to get $1,100 for it but am open to offers. No trades please. Thanks, Steve. View attachment 1186732View attachment 1186733View attachment 1186734View attachment 1186735View attachment 1186736

That the Saw I sold you Steve? I regret selling it sometimes, but I’m loving my now ported 365 special!

 

[Colonel428]

Hi Lane. Yes, that's a well ported version of the saw I bought from you. Hate to see if go really but I just wasn't using it very much. Great saw. Who ported your 365?