"You Suck" Thread 2016--Pics required!

[Gugi47]

I don't guess it's too chainsaw related, but if I have to put the bass boat in the water with saws aboard to get to the wood, lol...I did manage to score a brand new $290 Precision Propeller, Turbo Hot Shot prop for the bass boat...for $50 from one of my BIL's friends. I guess it qualifies for some '16 suckage.

Sent from my iPhone 6+ using Tapatalk

You would like this baby:
http://www.ebay.com/itm/QuickSilver...ash=item3d0046fd9b:g:9rMAAOSweW5VJunA&vxp=mtr
I know I do. You pick up the speed and straight the boat very fast.

 

[USMC615]

You would like this baby:
http://www.ebay.com/itm/QuickSilver...ash=item3d0046fd9b:g:9rMAAOSweW5VJunA&vxp=mtr
I know I do. You pick up the speed and straight the boat very fast.

I'll check that out...

 

[Tokin]

3 FREE saws...

The 925 was free with a stock hard nose bar. Needed fuel lines. I did buy a 32" bar for it and a new carb.

The 359 was free also, given to me by a friend who owns a tree service. Had a major wind storm blow thru, he made 60k in 3 weeks and bought all new saws.

The Mac 1-50 ran and cut when purchased at a yard sale for $5 by the guy who gave me the 925 and again given to me. Still has 170psi compression, the 925 is at 150 and the 359 at 130 could use a rebuild.

Soooo, how bad do I suck?

 

[JonCraig]

Soooo, how bad do I suck?

Big time. I love my 925; I'm sure you'll love yours, too.

 

[FamilyTradition]

View attachment 484349 3 FREE saws...

The 925 was free with a stock hard nose bar. Needed fuel lines. I did buy a 32" bar for it and a new carb.

The 359 was free also, given to me by a friend who owns a tree service. Had a major wind storm blow thru, he made 60k in 3 weeks and bought all new saws.

The Mac 1-50 ran and cut when purchased at a yard sale for $5 by the guy who gave me the 925 and again given to me. Still has 170psi compression, the 925 is at 150 and the 359 at 130 could use a rebuild.

Soooo, how bad do I suck?

Pretty bad in my opinion. Great saws, but I especially love that 925 with the full wrap handle and spike. Max.

 

[ChipsFlyin]

Husqvarna 288XP - $100. Was nasty dirty and packed full of junk when it was picked up. Not the prettiest - missing a couple screws, outer dawg, handle inserts and needs a new muffler. But, p/c are spotless, original bar in good shape and after a good clean up and new gas it runs like a champ.


Pick up condition


After clean up.

 

[noob290]

nice saws everyone.

Got this for free about 3 weeks ago from my father in law. He has 2 other 440s he mainly used to he let me have this. It only had a 16" bar on it with 2 rs chains, so i picked up a 20" bar and 3 more rs chians. Photos taken by me on my workbench after giving it a cleaning. Really wasnt that dirty to begin with.

 

[bigbadbob]

The donor of these wants a runner,, I get the rest.
Havent looked into them yet.
BBB

 

[Matt B]

Alright, finally my turn. Took a punt on a low hour, though thoroughly seized 372XP. $100
The bottom end and everything else on the saw was great except for a missing starter handle - don't look too close Husky purists...
Another $90 on a v good cond used oem p&c and some Caber rings and this is the result.

I now understand why this saw is so highly regarded. Now looking for a nice 346XP, think the Husky bug has bitten!

 

[Chris J.]

View attachment 484349 3 FREE saws...

The 925 was free with a stock hard nose bar. Needed fuel lines. I did buy a 32" bar for it and a new carb.

The 359 was free also, given to me by a friend who owns a tree service. Had a major wind storm blow thru, he made 60k in 3 weeks and bought all new saws.

The Mac 1-50 ran and cut when purchased at a yard sale for $5 by the guy who gave me the 925 and again given to me. Still has 170psi compression, the 925 is at 150 and the 359 at 130 could use a rebuild.

Soooo, how bad do I suck?

Suck? No, you

BITE!

 

[president]

The donor of these wants a runner,, I get the rest.
Havent looked into them yet.
BBB
View attachment 484996

do you need that 064 project for any of these Bob,?
0r are they all 066s and 460s?

 

[ChipsFlyin]

Husqvarna 288XP - $100. Was nasty dirty and packed full of junk when it was picked up. Not the prettiest - missing a couple screws, outer dawg, handle inserts and needs a new muffler. But, p/c are spotless, original bar in good shape and after a good clean up and new gas it runs like a champ.


Pick up condition
View attachment 484432

After clean up.
View attachment 484433

I could not find a place to put this so I'll just put it with my 288xp post. They are charging way too much for replacement Husqvarna screws on evilbay ---- $5.50 for one muffler bolt/screw, cover screws $9.95 for 4 and $4-5 shipped for single screws- that's crazy)

Here's what I got for $9.63 with tax and did not have to wait for a shipment :

2 - 10 packs and one 3 pack = have extras for future projects and I prefer the allen heads for easier and quicker dissemble.


Husqvarna 288XP Screw Substitutions from Fastenal ( All are Allen Head)
(The original screws are above the packages just to match up which screw goes with what )

 

[bigbadbob]

do you need that 064 project for any of these Bob,?
0r are they all 066s and 460s?

All o66, waiting to hear from the guy, the one with the bar runs fine piston looks great just over 150 comp.
Dont think in need the 64,,,yet
Thanks for your offer
BBB

 

[pioneerguy600]

The donor of these wants a runner,, I get the rest.
Havent looked into them yet.
BBB
View attachment 484996

I like it when deals like this come my way and they do often! Get 3 - 5 alike saws and make one runner, lots of parts to build more with a few additional donor parts!

 

[bigbadbob]

I like it when deals like this come my way and they do often! Get 3 - 5 alike saws and make one runner, lots of parts to build more with a few additional donor parts!

Well I was checking out the goods, the saw with the bar I cant find anytihng wrong, P&C are excellent 155comp,, runs and starts great, might need a cleaning, new starter handle,,,awaiting for some instructions. Never check the others.
BBB

 

[pioneerguy600]

Well I was checking out the goods, the saw with the bar I cant find anytihng wrong, P&C are excellent 155comp,, runs and starts great, might need a cleaning, new starter handle,,,awaiting for some instructions. Never check the others.
BBB

Sounds like you may end up with a lot of parts!

 

[NCfirewood]

Ahhhhhhhh you all SUCK lol. No deals here yet but I am proud of my 925 and haven't even got it yet. Should arrive today. Probably overpayed for it but hey, I wanted it. Nice saws guys.

 

[NCfirewood]

View attachment 484349 3 FREE saws...

The 925 was free with a stock hard nose bar. Needed fuel lines. I did buy a 32" bar for it and a new carb.

The 359 was free also, given to me by a friend who owns a tree service. Had a major wind storm blow thru, he made 60k in 3 weeks and bought all new saws.

The Mac 1-50 ran and cut when purchased at a yard sale for $5 by the guy who gave me the 925 and again given to me. Still has 170psi compression, the 925 is at 150 and the 359 at 130 could use a rebuild.

Soooo, how bad do I suck?

Drooling over this pic

 

[NCfirewood]

Ok so I did get one good deal. Not a muscle saw or rare or expensive but still a good saw. Gave my friend $20 for it. Cleaned it up. Hit the chain a few licks with a file. Fresh mix and cuts like new.

 

[hanniedog]

Best thing that can happen to those XLs is a Cat D8 track.