"You Suck" Thread 2024"--Pics required!

[david newbie]

View attachment 1212064
306A. $5.00 garage sale. Quick clean and derust bar. Runs perfecto

How did you get the bar looking so pretty?

 

[The Stig]

How did you get the bar looking so pretty?

80g sandpaper … One direction

 

[The Stig]

Freebie 029. Needs an oil cap , chain and AF cover nut. Runs and oils

 

[Piotr Pakuła]

Picked up this Husqvarna 261 last night from a guy near my hunting camp. Starts right up runs and idles great. Get more into it when I get it home. Seems like it was well cared for.View attachment 1209245View attachment 1209256

How much

 

[bigbadbob]

$275 61hrs slug is as new,, guy is a clean/neat freak. he went electric

 

[Piotr Pakuła]

Model 261C

 

[olds120]

How much

Oh I forgot that part lol
$250

 

[Gumneck]

View attachment 1212064
306A. $5.00 garage sale. Quick clean and derust bar. Runs perfecto

Very nice....5 bucks, you suck!

 

[Piotr Pakuła]

Freebie 029. Needs an oil cap , chain and AF cover nut. Runs and oils

View attachment 1212201

How much

 

[The Stig]

Town Bulk pick up tomorrow. Found these in a pile on the way home. Sure I can make one nice runner out of them

 

[The Stig]

It’ll probably run with the secondary choke off

 

[Gumneck]

@Brufab should be forced to see this sucky post

 

[Chainsaw Collectors]

Found a Stihl MS290 Farm Boss at the landfill. bought countyline bar and chain $58 3/8" 20", installed. Saw would idle fine before installing b/c. I never revved it without b/c. Now won't stay idling. Likes to start with choke which is combined with full throttle on this set up. Take off full throttle after 2 seconds and dies and won't throttle back up. I suppose I'll do new fuel lines and filter, then if still issues carb clean/rebuild/replace. Or is it an air leak?

 

[singinwoodwackr]

Check the clutch for crud.

 

[Piotr Pakuła]

There is a high chance of a leak

 

[SimonHS]

Snagged all this for £120 / $155. The grinder is a 522A (European voltage 511A) with spare wheels. There are hundreds of presets, a half reel of 59AC .404 chain, 150 feet of 22LP chain, a part reel of 21LPX, a part reel of 23RM3 and a breaker & spinner set.

 

[Bob Hedgecutter]

Snagged all this for £120 / $155. The grinder is a 522A (European voltage 511A) with spare wheels. There are hundreds of presets, a half reel of 59AC .404 chain, 150 feet of 22LP chain, a part reel of 21LPX, a part reel of 23RM3 and a breaker & spinner set.

View attachment 1214119

Yep- you suck.

 

[bigbadbob]

Saved from landfill still 024/026 jred 90 jred sp49? pioneer and sears/poulan. Free

 

[Chainsaw Collectors]

Crossed a saw off my bucket list! Traded my Mac 610 for this homelite super xl BIG RED! I need a proper plastic black af cover for it tho. The current one is for sale or trade, old blue metal one painted black. Let me know if you have a plastic one available.

 

[LB6259]

I posted this in the pioneer thread, but here's my "you suck" that I've been hiding for a few months:

$185(probably overpaid), had to source a recoil, need to pull the broken exhaust studs, and I'm going try the "Husqvarna 365" coil mod that I found on here scrolling through the forum. I also have a pioneer bar(that's been sitting for a few years, it came with another saw) that I think will fit but I have no idea what size it is. All I know is it's big(to me) and I need to get a picture of said bar eventually when i finally drag it inside to actually finish putting it together..

And yes, it's rough. But I think it'll be worth it.