Gas Mix, Too Much Oil?

secureland · Sep 23, 2008

I've been using 93 octane gas. I use a 50:1 mix. Yesterday I mixed a ratio of 43:1 with the 93 octane. (I mixed 4 oz.'s of oil to 1.35 gal. gas)

Is this an OK mix, or is it bad for the saw?

Thanks

Former Saw Builder · Sep 23, 2008

secureland said:
I've been using 93 octane gas. I use a 50:1 mix

I mixed 4 oz.'s of oil to 1.35 gal. gas.

Is this an OK mix, or is it bad for the saw?

Thanks

Your mix = 43.2:1 - It won't hurt your saw.

PB · Sep 23, 2008

It's fine. Just run it.

secureland · Sep 23, 2008

Yep, I just added that into the first post.

What do you think, will this do harm?

aandabooks · Sep 23, 2008

Add another .2125 gallons of 93 octane gas and you'll be right back at 50:1. Better hurry back to the same station though. It would be horrible for your saw if you mixed gas from two different deliveries.:greenchainsaw:

Just pulling your leg. Just run the saw.