can you guys tell me anything about this saw? the 041 av super? Any good? i had one given to me. needs a bar chain and oiler and a tune up .. but nothing major. EIther way im going to get it goin again.. just wondering what i should expect from it . the guy gave it to me because it looks somewhat old and he doesent want to spend the money for the bar , chain and oiler. So i geuss i got me a new saw. i also have a homelite EZ 6. or something like that.. the things a tank! havent had it appart yet to see why it doesetnt run.. i thikn it pry just sat to long! anyways im going to read the other posts now! see ya guys!
041 av super
- Thread starter arborman
- Start date
Help Support Arborist Forum:
Bar Burnner
ArboristSite Lurker
Hello arborman, I have never seen a 041 super. I have used an 041 on sevral occasions and have found it to be a VERY RELIBALE saw. I see in my repair manual that the 041 super is shown to be a 72cc saw 48 mm bore 40mm stroke wich is a pretty good size saw. rite up there in fact with the 038 mag 044 and 372 husky ! Check and see if there is a rubber pick up hose that may have gone bad inside the oil tank.I would put a 20 in. bar & chain on the thing and it should do a very good job for ya! Talk with sonny on this forum i know he is very fond of the 041 . They realy are a well built saw .
John in MA
Addicted to ArboristSite
sonny
ArboristSite Guru
SOBs from Stihl discotinued the 041 S yrs back. Best saw ever built. Great palm saw!!!! (There is saws & then there is palm saws )
John in MA
Addicted to ArboristSite
What makes a good palm saw?
super
Studs rather than screws hold the cylinder on for clearance of the bigger cylinder bore, outside of cylinder.
Studs rather than screws hold the cylinder on for clearance of the bigger cylinder bore, outside of cylinder.
fun_chopper
ArboristSite Operative
Dont get rid of it
I collect chainsaws, and the 041 super is a rare saw, produced only in germany (so I am told) but mine is worth excellent condition .well lets just say I could buy a brand new 088 with 36" bar for what its worth.
I collect chainsaws, and the 041 super is a rare saw, produced only in germany (so I am told) but mine is worth excellent condition .well lets just say I could buy a brand new 088 with 36" bar for what its worth.
logcutter429
ArboristSite Operative
I have an av an a super both found in the dump, both run , their so slow cutting thats probaly where they belong.
Similar threads
