084 - gettin it cranked without breaking a hand

[Lakeside53]

Stihl makes a tool......... #5910-890-2800


.

Pretty tools All you need now is the REST of them! Like the other flywheel puller...

 

[04ultra]

Pretty tools All you need now is the REST of them! Like the other flywheel puller...

:hmm3grin2orange: :hmm3grin2orange:


.

 

[flht01]

What's this bar fit?

I'm a little dissapointed tonight. I bought this 084 because I had a brand new bar hanging in my little saw room that wouldn't fit any of my other saws and I assumed it was a mount for the 084/088. Hate to see good parts laying around. Took a quick look at a little while ago and I don't think it's for the big mount saws.

Can anyone tell me what a Stihl Duromatic 3001 000 9231 fits?
It also has the numbers 7 79 31 stamped in it.

 

[Lakeside53]

3001?

 

[flht01]

3001?

Just went out and looked again, those are the numbers stamped on it.

I can layout the cannon that came on the 084 and a bar off one of my other saws for a comparison photo if needed.

 

[RiverRat2]

Just went out and looked again, those are the numbers stamped on it.

I can layout the cannon that came on the 084 and a bar off one of my other saws for a comparison photo if needed.

give me a sec ive got a bar & chain manual

I'm showong it to be a 25" bar .404", .063" 84 drive links to go on an 070 or 090 models did i beat Lake????

 

[Erick]

You beat me I was going to say 090

Man I gotta learn to type with more than one finger

and it should work just fine on your 084

 

[Lakeside53]

give me a sec ive got a bar & chain manual

I'm showong it to be a 25" bar .404", .063" 84 drive links to go on an 070 or 090 models did i beat Lake????

You did, but I've had a couple.... and I'm having a couple more

 

[flht01]

give me a sec ive got a bar & chain manual

I'm showong it to be a 25" bar .404", .063" 84 drive links to go on an 070 or 090 models did i beat Lake????

And the winner is .....

070 or 090, and I thought those saws used the mount as the 084/088. Guess I'll have to find a home for it, I sure don't need another saw

thanks

 

[RiverRat2]

And the winner is .....

070 or 090, and I thought those saws used the mount as the 084/088. Guess I'll have to find a home for it, I sure don't need another saw

thanks

The way they are grouped on the manual 070/090 are together

the group above that is 050, 051, 075, 076, 084, & 088

 

[Lakeside53]

, I sure don't need another saw

thanks

You are SO WRONG

 

[RiverRat2]

You beat me I was going to say 090

Man I gotta learn to type with more than one finger

and it should work just fine on your 084

My guess is it will work on the 084 also but i would have to try it to see,
I'm gonna join Lake and have a couple or three myownself

 

[JohnCusickjr]

Excellent idea...
Honey where's the tequila...

 

[Erick]

All right all right I'll have one, just stop twist'n my arm

 

[Erick]

Both of my four footer's for my 084 came off of an 090 you should be just fine. If I remember right the 090 has two chain adjuster pin holes in the bar but the rear one matches up to the 084/088, etc. so they work fine. Just one unused hole.

 

[flht01]

You are SO WRONG

I hope no more show up in my sawroom, one saw turned into too many all by itself

My guess is it will work on the 084 also but i would have to try it to see,
I'm gonna join Lake and have a couple or three myownself

Thanks Erick and RiverRat2, I went back out and looked. My 090 bar only has one set of chain adj holes and their about 1-3/4" forward of the 084 bar. It'll fit but the adjuster has to be screwed all the way out to clear the clutch. It looks like I can drill two holes in the same location as the cannon bar and it would work just fine.

 

[Diesel JD]

Okay so that's why they say in the old Baileys catalogues along with the bars for the 051 etc bars "can be drilled for the 090" 2 chain adjusters interesting.

 

[RiverRat2]

Right On,,,

Okay so that's why they say in the old Baileys catalogues along with the bars for the 051 etc bars "can be drilled for the 090" 2 chain adjusters interesting.

This is a wonderful place ifn ya like messin with saws......
Full of Good folks,,,,,,,,,,,,

 

[aggiewoodbutchr]

I got around to installing the new clutch springs. Here's the "tool" I made to install them without taking the clutch off.

By using a socket and ratchet as a fulcrum I was able to install all 3 springs in under a minute (if you don't count the picture time).

Here are the old and new springs side by side. Should the difference in size concern me? (ref post #73)

 

[GASoline71]

Hey... that is a cool Idea!

I'd give you rep for that... but I got to spread some more around first...:bang:

Gary