Aftermarket tracks for carlton 8018?

[MOE]

Has anyone replaced 8018 tracks with aftermarket? What kinds of deals are out there. My tracks are 50% and good except one track with a bad cut that's almost to the drive sprocket center. I'd like to find a used one that's close but if I can't I'll bite the bullet and go new,(aftermarket). Who are good suppliers. I have to get something lined up this week. I'm running on borrowed time with the cut track. Thanks.

 

[TimberMcPherson]

Their is likely to be an equivelant in other machines.

Rubber Tracks USA - Aftermarket Rubber Tracks Home Page

 

[MOE]

Here's an update on the track. I found out it is cabled but only in the center so that takes care of my worries of the rubber braking. I was able to patch the cut with large belt fastners made by flexco. They are for splicing and repairing large conveyor belt,(like for crushed rock) up to an inch thick and still run around a 12" diameter roller. I think it will work. I'll get some pics up as soon as I figure out the new system on the site.

 

[Oly's Stump]

Let us know Moe how it works out. I have a smaller cut in my track. Thanks! Oly

 

[ASG]

8018 Tracks?

I have a 2005 8018 TRX, and looking to replace tracks soon. Just wondering what info anyone has out there, prices, brands, etc... any help appreciated. Thanks

 

[ASG]

Another track ?

I noticed my Carlton 8018 has bridgestone tracks on it. Does anyone know who makes the undercarriage for these units?

 

[MOE]

I noticed my Carlton 8018 has bridgestone tracks on it. Does anyone know who makes the undercarriage for these units?

Not sure who makes them but I've seen the same setup on case and ditch witch directional borers and some mini excavators. I'm sure it's all common parts.

 

[MOE]

Let us know Moe how it works out. I have a smaller cut in my track. Thanks! Oly

One year and about 120 hours later, the flexco belt fasteners are still holding the cut together just fine.

 

[Mowingman]

Chermack, makes the rubber track undercarriage for Carlton machines. They are well known for their line of tracked drive systems.
Jeff

Not sure who makes them but I've seen the same setup on case and ditch witch directional borers and some mini excavators. I'm sure it's all common parts.