Back In The Shop......Now What's On Your Bench????

[Rx7man]

Jennings et al were saying about 1.5-2mm BTDC, going more didn't really give much more results... on a saw like this with a 64mm rod and 36mm stroke, that works out to 1.4mm = 20* or 3mm = 30. Since I have no key, I stuffed a piece of ~2.5mm wire in squish band and set the flywheel to the same location as on the 61.. there's not a trace of a timing mark I can find on there, so it's a bit of a guess as to when the coil fires.. haven't put a timing light on it to see where for sure.

I just looked at the frequency analysis of the video I took of it running, it seems to make good power from about 6500 RPM to 9000, free revving to about 11,500.. starts to bog under 5000. I'm going to have to spend some time on that chain to make it actually cut.. rakers have to go down at least .010".

 

[Fire8]

I've got four of these big bastards to do right now. They take a while. Gotta add a 272 coil, and a high speed jet, plus port work.....

View attachment 449728

Real Nice saws but me a 2100 is my choice

 

[Rx7man]

Real Nice saws but me a 2100 is my choice

I have 6 of those coming into my shop this winter.. I get to keep one runner in exchange for making as many good ones as I can out of the rest of them.

 

[Vizionary]

Bought some new tools today. Really happy with it.

 

[Mastermind]

I love new tools.

 

[hseII]

ECHO CS-4500
No Spark


I Unplugged the Kill Switch, and still no Spark.

Is this going to be another lost cause, or is a Coil available?

Heath

 

[Mastermind]

I have a couple of top handled Echos. I have no ider if the coils are the same though.

 

[Trx250r180]

Crush.............

 

[hseII]

Crush.............

Hush Debil

 

[VinceGU05]

For the 2100?

What's the recommendation for one of these?

 

[Mastermind]

So far, either factory, or the 395XP piston (which takes quite a lot of work).

 

[MustangMike]

Randy, I want to see vids!!!! And we need to determine what to call it!

Keith, why no dp cover on the hybrid?

Brian, I don't think dp covers fit a 441, but good luck with it.

 

[Macman125]

Homelite 550 damn gas tank and bar oil tank are leaking into each other.

 

[Mastermind]

Randy, I want to see vids!!!! And we need to determine what to call it!

Keith, why no dp cover on the hybrid?

Brian, I don't think dp covers fit a 441, but good luck with it.

Some of the earliest MS460s had the D style jug. I'd call it a MMWS MS460+

View attachment 450949 Homelite 550 damn gas tank and bar oil tank are leaking into each other.

We have fixed that before on a couple of those. Not fun.........but doable.

 

[hseII]

Hey Moobs,
Have you already done the cylinder work on that 440 of mine that made its way to you?

I forgot that I had this ol' 46D cylinder laying around here....

 

[Mastermind]

Yeah, yours has been done for ages. I need to test run it again.

 

[hseII]

Yeah, yours has been done for ages. I need to test run it again.

Cool.

 

[Trx250r180]

Randy, I want to see vids!!!! And we need to determine what to call it!

Keith, why no dp cover on the hybrid?

Brian, I don't think dp covers fit a 441, but good luck with it.

yes ,they wont ,but i never said cover ,can still dual port a 441 by putting a hole in the lh side and running a husky deflector like the 3rd ports on my hybrids

Hey Moobs,
Have you already done the cylinder work on that 440 of mine that made its way to you?

I forgot that I had this ol' 46D cylinder laying around here....

sell the 50mm and be a man and send the 46 jug

 

[hseII]

yes ,they wont ,but i never said cover ,can still dual port a 441 by putting a hole in the lh side and running a husky deflector like the 3rd ports on my hybrids



sell the 50mm and be a man and send the 46 jug

HaHaHaHaHa.

 

[Mastermind]

I can do whatever muh dear friend Heath wants.