Craftsman 3.7 bar

[promac850]

"WE" did? :hmm3grin2orange:

If you know any more then when you started this thread then its worth it to me.

I'm not trying to beat the piss out of anybody, but I have a hard time letting info that I know is wrong being presented as right.

Even more so when they try to make offending personal remarks about it as well.

This site does not deserve that.

Yeah, it was more of you...

I agree on the information part. However, when I'm wrong, which will happen occasionally, try not to beat me up over it.

Lol, that crazy guy did make some crazy offensive remarks.

P.S. My likes were not really supporting him... there really were a couple of funny things he said.

 

[stihl 440]

Is this the now lame attempt at fessing up that your wrong?
Man up, come out and say it.

Its ok, just because your a timber faller does not mean you have to know anything about a chainsaw......

Yuk it up some more now.

HAHA never said i was wrong!..lol Sorry bud...i do believe YOU yuked up enough of a pile in your previous posts for me! I thaught you where "done" anyway? huh?:msp_biggrin::msp_biggrin:

 

[stihl 440]

Give him hell for that half-assed acknowledgement, Mark. The system says I can't rep you yet.

His response reminds me of a relative who would wreck your truck, then try to calm you down by making jokes about driving too fast.

I take it that your that reletive in your family?l:msp_biggrin:

 

[stihl 440]

Poor guy, we're beating the piss out of him...

Well MM, did you get your paws on any more good old Poulans?

HAHA!! Not even close yet!:hmm3grin2orange:

 

[rms61moparman]

I take it that your that reletive in your family?l:msp_biggrin:

NO he is NOT!!!

He may be "that" relative though!


Mike

 

[stihl 440]

Yeah, it was more of you...

I agree on the information part. However, when I'm wrong, which will happen occasionally, try not to beat me up over it.

Lol, that crazy guy did make some crazy offensive remarks.

P.S. My likes were not really supporting him... there really were a couple of funny things he said.

I'll take that as a compliment.....lol:hmm3grin2orange: BUT!!...in the craftsmans case which has nothing to do with a mac 10-10 really other than the bar compatibility....and BOTH of these saws oil through the oil hole anyway! lol :msp_biggrin:

P.S....thanks for all the support promac610...LOL!:hmm3grin2orange::jester:

 

[stihl 440]

NO he is NOT!!!

He may be "that" relative though!


Mike

It got my point across..lol It happens.

 

[Chris J.]

I take it that your that reletive in your family?l:msp_biggrin:

NO he is NOT!!!

He may be "that" relative though!


Mike

It got my point across..lol It happens.

Actually, stihl 440, I have no idea what your point is. If there's a joke that I missed, please explain it because it would be nice if at least one of your posts in this thread made sense.

Please note the lack of emoticons.

 

[stihl 440]

Actually, stihl 440, I have no idea what your point is. If there's a joke that I missed, please explain it because it would be nice if at least one of your posts in this thread made sense.

Please note the lack of emoticons.

Actually all of my posts made sense...maybe not to you however. If thats the case then im sorry...i cant help you...

Oh...P.S....if you have any more problems with me...PM's work...why pollute the thread with personal debates any more than we have to?

 

[Eccentric]

This whole thread is more polluted than the Erie Canal....

 

[Guido Salvage]

This whole thread is more polluted than the Erie Canal....

Aaron,

Wrong New York canal, you are thinking of Love Canal.

The Love Canal Tragedy | EPA History | US EPA

Now I have to go back and waste 10 minutes of my life to see what all this back and forth is about on a meaningless topic.

Gary

 

[Modifiedmark]

This whole thread is more polluted than the Erie Canal....

Ended up that way, if I ever try to help these two nitwits again please slap me.

 

[Eccentric]

Right you are Gary. It's more polluted than the Love Canal. Don't waste your time. Basically, it's multiple pages of crap, with some technical info from Mark burried within...

 

[Eccentric]

Ended up that way, if I ever try to help these two nitwits again please slap me.

Will do Mark. Doubt there'll be a need. I just added the youngster to my 'ignore list'. Go check out the McCulloch thread to see why...

 

[Modifiedmark]

Will do Mark. Doubt there'll be a need. I just added the youngster to my 'ignore list'. Go check out the McCulloch thread to see why...

I still have to learn how to use that ignore list.:help:

 

[Guido Salvage]

Okay, it took me 12 minutes instead of 10 minutes to wade though this mess. This is what I gleaned:

1) Promac610 apparently never placed his order for a bar and has never done any work on the saw and has yet to run it.
2) Stihl 440 is another pro timber cutter a la HILLBILLYREDNEC.
3) Neither promac610 or Stihl 440 have any idea of what bar will work on this saw.
4) People who use smilies and "like" every thread that is posted are clueless about saws.
5) Mark's bar data and my link to the Love Canal story are the only two useful bits of information contained in this topic.
6) Kids will be kids....

 

[Eccentric]

I still have to learn how to use that ignore list.:help:

1)Go to his profile page,

2)then click "add to ignore list" over on the left, where the "find more posts", "find threads started by", and other quicklinks are.

3)Click "yes" when the "are you sure....?" confirmation tab comes up.

4)Enjoy a cold beer.

That's what I did!

Okay, it took me 12 minutes instead of 10 minutes to wade though this mess. This is what I gleaned:

1) Promac610 apparently never placed his order for a bar and has never done any work on the saw and has yet to run it.
2) Stihl 440 is another pro timber cutter a la HILLBILLYREDNEC.
3) Neither promac610 or Stihl 440 have any idea of what bar will work on this saw.
4) People who use smilies and "like" every thread that is posted are clueless about saws.
5) Mark's bar data and my link to the Love Canal story are the only two useful bits of information contained in this topic.
6) Kids will be kids....

Also, Kid's will be kids............but 18 sure is old enough to know better....

 

[rms61moparman]

1)



Also, Kid's will be kids............but 18 sure is old enough to know better....

Don't be too hard on him guys!!!
I knew everything there was to know when I was 18 too.
Now all I'm real sure about is that I'm not REAL sure about anything!!!LOL


Mike

 

[stihl 440]

Okay, it took me 12 minutes instead of 10 minutes to wade though this mess. This is what I gleaned:

1) Promac610 apparently never placed his order for a bar and has never done any work on the saw and has yet to run it.
2) Stihl 440 is another pro timber cutter a la HILLBILLYREDNEC.
3) Neither promac610 or Stihl 440 have any idea of what bar will work on this saw.
4) People who use smilies and "like" every thread that is posted are clueless about saws.
5) Mark's bar data and my link to the Love Canal story are the only two useful bits of information contained in this topic.
6) Kids will be kids....

First off....2,3,4,5, and 6...are alll completley false. Sorry boys...i dont need to lie about anything...look it up everything i said is 100% true...if you think not....maybe you should go get both saws and try it?...huh?

 

[stihl 440]

dis-regard