Homelite 1050, Super 1050, 1020 - Which one is it?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I also checked out the bar I have on my 1130G. Turns out it's a XL mount 32" roller nose. I had forgotten about the deal with this bar. It was binding between the rail guides. With a little tweaking of the guides, I was able to make it work.

1123816590_7wpNU-M.jpg


1123816764_MjxPN-M.jpg


1123816989_RYnek-M.jpg


1123817148_wV3e2-M.jpg
 
Brad
Do you have a half wrap handle on that saw? Would you be interested in swaping for a full wrap? I have a full wrap on my XP1020A but the case is broke on the clutch side where the full wrap connects too. So a half wrap would work for mine. PM me if your interested.

Hey Scott, are you still interested in this handlebar? It's yours if you can use it. It's not in perfect condition, but it is serviceable.
 
Now this is what I'm talkin' about!!!

1133889994_qLjUM-L.jpg


1133889892_zK3Tg-L.jpg


There was dirt in the groove, but the bar appears virtually unused. I cleane off the light surface rust with muratic acid, then put a fresh brushed finish on it with a belt sander. The picture don't really show it, but the bar is almost shiny new looking. The chain clears the guide plates after just a little tweeking. They barely touched to begin with.
 
What do you think about stenciling this bar with red block letters spelling out HOMELITE, like OEM bars of this vintage? I know this roller nose wouldn't have that, but I think it would still look cool.

The saw looks great Brad.
Me personally, I would get the old Oregon
stencile from sugar creek supply. I think
it would look nice.


Lee
 
Here she is in wood. There's something wrong with the carb. It doesn't take well to L needle adjustment, and has throttle response issues. I've also got the idle air bleed screw backed way out and still not getting the idle RPMs up like I want. So it wasn't the VP fuel. I've got the carb back in the ultrasonic cleaner again. It runs great in the wood though.


<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/3k3nnajhROM?fs=1&amp;hl=en_US&amp;rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/3k3nnajhROM?fs=1&amp;hl=en_US&amp;rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>
 
Back
Top