Husky 266xp

[DarioMO]

Elastostart

I don't know why and how but installing the elastostart on my 044 solved the starting problem. It usually starts now in the 2nd or 3rd pull....just once when saw is warmed up. It doesn't take much effort to pull now too!

 

[Blader]

Well i cant see how it could be my recoiler cause when I pull out spark plug i can pull it real easy and cord doesnt bind up?? Someone at work was saying there's a flapper kind of shim somewhere inside that acts like a valve and can be sticking which is causing high compression? I will have to tack off the card end and see if there's anything like that in there.Or so kind of dirt causing a blockage? If not my friend at work was saying there's a husky dealer (old school) guy that knows a lot and is reasonable...

 

[Diameterdan]

I ran a hone thru the cylinder and doubled the base gaskets. Much easier to start now!

 

[Gord404]

got loads of shop manuals - usually heat the very end and make a little mushroom head