Peacock
Addicted to ArboristSite
How about osage orange ?
Yeah, I mentioned hedge. Nothing is harder to cut. Hard to find a long straight piece around here.
How about osage orange ?
How about osage orange ?
Ha! I've been accused of worse.
Seriously though. Same RSC chain and 20" bar on each. I titled the thread "Unscientific 361vs441vs660". What is so hard to believe? The 441 has enough power and higher chain speed. With the rakers lowered on the 660 it was faster. With an 8 pin it would have whooped the 441. They both destroyed the 361, as they should.
How about you?
Figure twice as hard then add a little and that is osageHardest I've ever cut was dead Black Locust.......never cut Osage Orange!!!
Good post!! I cut more in the winter than now, it's around 98 deg.F here and the humidty is very high. Cut some pines Monday and was soaked after a half hour of cutting, screw that!
OK, dummy. I just said I know how to do it right.
You must have came out of the womb with a tach and carb tool?? Anyone ever show you how to do something right?
One thing that is sure about Ben, is that he is not a dummy !!!
You don't have to like him, but you should respect him!!
Why is this a supprise? A 460 is very close to 440 and a 372 will outcut a 440 pretty easily....
This is coming form a guy that has to go to T Hall to have his carb set....:hmm3grin2orange:
I can honestly say no one held my hand when I learned to tune carbs.
FWIW 12,700 is pretty rich for a 440. My Dual port 440 ran much better at around 13,700 and I used it this way for several seasons.
Had one ported Stihl 260 burn up as the result of a air leak. Had alot of time on it though.
Ben Ben Ben, look at cha. Now the 440/460 are quiet close according to you, NOT. Hell at the rate you plucking off the numbers the 372 will soon be outcutting the 660 and 880,LOL
Yup the man brought his 440 in to get the carb set. He doesn't have a tach so to get a precise high speed setting what else is he to do. Someone had set it at over 15,000 rpms by ear. Good thing he did stop in and get set and for FREE. Your laffing at him but it seems you need a tach too or use the one you got. Max rpm on a 440 is 13,500. There is a reason for the max number, its called stress. You ran yours at 13,700 which isn't much over but no saw will go out this shops door over max rpm. At 12,700 (only 800 rpm's from max) his saw cut fine, in fact his saw ran strong. I could have set it at 13,500 and gained what, more noise? I'm still wondering if its stock for its pretty fast saw, much faster than my 044 for sure. Max rpm isn't how you get the most power out of a saw as I'm sure you well know or should know. Max rpm is a stress guideline and nothing more.
You burnt up a 260 with a air leak. Now Ben thats a very revealing statement. Surely you can tell by ear when a saw has a air leak. Did you not care if you burnt it up or you didn't really know it was over reving? Either way though I give you credit for admitting your not the sharpest cat in the woods.
I know this now, sorry Ben. Me and cut4funk were having so much fun I got carried away. If anyone has felt they were disrespected, I apologize...
He was feeding you line and lettin you run with like a big ole bass or redfish,,,, I was just afraid he was gonna re-arrange your anatomy when he finally set the hook and give you a bad case of the Optimacal-Rectilliosis,,, ya-know,,,, It gives ya a $h_tty outlook on life til yer jawbone sets back in place,,,, LOL,,,,,:notrolls2: :notrolls2: :notrolls2:
Muahhahahhaha, you mofos.:hmm3grin2orange: I even sent Ben a pm apology. I can still respect someone who is less knowledgable about saws.:biggrinbounce2:
On a serious note, I still think cut4cum is a fake.....just my dimes worth for today.
Hmmmmm, I'm glad you sent Ben an apology, But you could have said it here.
NOBODY PICKS ON A MICHIGANDER without retribution.
Now I got to send one of my girls after you.
Next time when Ben says a husky kicks believe it.
He may say he's sorry but I'm not, send that gal here, send 3 of em, better yet send 5, one for everyday of the week and 2 days rest,
Go head and order 7,,,,,better to have em and not need em than to need em and not have em ehhhhh??????:hmm3grin2orange: :hmm3grin2orange: :hmm3grin2orange:
He may say he's sorry but I'm not, send that gal here, send 3 of em, better yet send 5, one for everyday of the week and 2 days rest,
No More dolls for you, Talon sent you one and the dam thing didn't hold air.
I'm sending over the real thing.
Er ah sorry I did not know what she should wear.
He may say he's sorry but I'm not, send that gal here, send 3 of em, better yet send 5, one for everyday of the week and 2 days rest,
Hmmmmm, I'm glad you sent Ben an apology, But you could have said it here.
NOBODY PICKS ON A MICHIGANDER without retribution.
Now I got to send one of my girls after you.
Next time when Ben says a husky kicks believe it.
Mmymymymyymymymymymymymymymyymy, thats my Demi, yummmmmmmmmmy. Keep your 14 and send me Demi, wedoggggggggggggie.
Enter your email address to join: