husky kicks

[manual]

The 372 offer is still up, I'm not backing down from that.

Ben seems to be a hard core Husky boy, even though he knows what is the best.:hmm3grin2orange:

Say Manual, you ready for that 2171 to get blown away??

Get back on the porch with the puppys.:smoking:

 

[2000ssm6]

Get back on the porch with the puppys.:smoking:

There is no room, the 372s and 2171s are sitting up there watching the real saws cut.

 

[THALL10326]

We are going to have to change this thread from Husky Kicks to
Thalls Heart Kicks:hmm3grin2orange:

After seeing that picture of Demi I'm just now catching my breath, oh myyyyyyyyyyyyyyyyyy what a woman,mmmmmmmmmmmmm good..

 

[manual]

There is no room, the 372s and 2171s are sitting up there watching the real saws cut.

I said the porch not the throne.
Better yet you need to use Toms out house
Cause your full of it.

 

[THALL10326]

Rest of what? LOLOL, nm, ya gotta eats sometime!

:hmm3grin2orange:

I was planning on doing alot of that,:hmm3grin2orange: :hmm3grin2orange: :hmm3grin2orange: :hmm3grin2orange: :hmm3grin2orange:

 

[Sprig]

We are going to have to change this thread from Husky Kicks to
Thalls Heart Kicks:hmm3grin2orange:

Lololol, hopefully so! Gotta have a good ticker ta pumps da doughnut remnants through! (Cheerios, well they are little ones yes?)

Beer helps. When in doubt do a cs plug-wire lick test

 

[Cut4fun]

Now I understand why silly 2000 didn't know what he was looking at when I referred to stock square chains. He don't have a clue about different chains evidently.

I need a 20" bar for a Poulan 2775 saw. I was told the chain has a pitch size of "91", never heard or it.
thanks

So here is todays lesson. Top 2 pics is of chain called barbwire good chain.
Bottom pic is of stock square chain with front cutters touched up by hand.
Study and learn the difference in chains before you try and question others :newbie: silly 2000.

 

[rahtreelimbs]

Now I understand why silly 2000 didn't know what he was looking at when I referred to stock square chains. He don't have a clue about different chains evidently.

All part of the learning curve!!!

 

[Cut4fun]

All part of the learning curve!!!

So True. I remember showing up to my 1st gtg with stock saws and sharp out of the box Round Chisel chains . :hmm3grin2orange: :hmm3grin2orange:

 

[2000ssm6]

Now I understand why silly 2000 didn't know what he was looking at when I referred to stock square chains. He don't have a clue about different chains evidently.


So here is todays lesson. Top 2 pics is of chain called barbwire good chain.
Bottom pic is of stock square chain with front cutters touched up by hand.
Study and learn the difference in chains before you try and question others :newbie: silly 2000.

So you don't ask for help neither? Man, I'm among some of the smartest people in the world.

Your "race" chains are not made by you and it is not the truth to tell people your "stock" saws can beat their really stock saws. Get a grip dude.......Fess up!!!

 

[SawTroll]

All part of the learning curve!!!

Yep, and that curve can be pretty steep in some cases.....:biggrinbounce2:

:hmm3grin2orange: :hmm3grin2orange:

 

[bwalker]

Ben seems to be a hard core Husky boy,

I've owned more Stihls than Husky's. I am not brand loyal at all and run what performs. In the 50, 60 and 70cc classes its Husky hands down.

 

[SawTroll]

I've owned more Stihls than Husky's. I am not brand loyal at all and run what performs. In the 50, 60 and 70cc classes its Husky hands down.

He he, more like Husky - Stihl - Husky, but just imo......:chainsawguy:

 

[2000ssm6]

In the 50, 60 and 70cc classes its Husky hands down.

I'm gonna have to come to yall's dark corner to see that. Must be region specific.....

 

[Cut4fun]

Your "race" chains are not made by you and it is not the truth to tell people your "stock" saws can beat their really stock saws. Get a grip dude.......Fess up!!!

2000 :help: they have medications for your delusions.

My race chains are made by people that know WTH they are doing to get the most out of a chain. They pack and sale all over the U.S. Anyone that wants a edge in chains has to pay the price of someone with knowledge and patience to take 10-20 hours to make a true race chain.

Plus I never said I could take a stock saw and out race any other stock saws. Thats what they have stock saw racing at the competitions for and I get my azz handed to me for being such a poor operator. I only speak the truth and dont make **** up like you seem to. I have no reason to make stuff up that i dont have a clue on :newbie: .

Where do you get your misinformation info 2000 my only stock saws are a 361, 3-5000's, 500, 2250, 1800, 2000.

My woods ported saws are 84, 66, 7900, 357, 5000.

If you show up to a true gtg with stock saws like I did once, you will learn as I did and be awestruck by whats out there cutting wood and never look at a true stock saw the same. Like if you drove a car with a 454 and had to jump in a 4 banger chevette to go home in.

 

[2000ssm6]

2000 :help: they have medications for your delusions.

My race chains are made by people that know WTH they are doing to get the most out of a chain. They pack and sale all over the U.S. Anyone that wants a edge in chains has to pay the price of someone with knowledge and patience to take 10-20 hours to make a true race chain.

Plus I never said I could take a stock saw and out race any other stock saws. Thats what they have stock saw racing at the competitions for and I get my azz handed to me for being such a poor operator. I only speak the truth and dont make **** up like you seem to. I have no reason to make stuff up that i dont have a clue on :newbie: .

Where do you get your misinformation info 2000 my only stock saws are a 361, 3-5000's, 500, 2250, 1800, 2000.

My woods ported saws are 84, 66, 7900, 357, 5000.

If you show up to a true gtg with stock saws like I did once, you will learn as I did and be awestruck by whats out there cutting wood and never look at a true stock saw the same. Like if you drove a car with a 454 and had to jump in a 4 banger chevette to go home in.

So other people build your chains, hmmmmm. We have met before but it was a while ago, good to see your still a rookie and a liar Seems you are no more than a mere mortal, like me. Only difference is I tell the truth:newbie:
Keep calling me a rookie, takes one to know one, rookie

Be back in a few, gotta work(the truth)

 

[SawTroll]

2000 :help: they have medications for your delusions. ....

I don't care about either race saws, or gtg results (too many variables) - just work saws......:biggrinbounce2: :hmm3grin2orange: :hmm3grin2orange:

 

[Cut4fun]

2000 when you pull your head out of that big hole on your backside and have a open mind, only then will you see the light and begin to learn.
Till then just make sure your skirt isn't to tight being a cheerleader so you might have a chance of thinking on your own someday.
Nuff said by me on the subjects because, I have nothing more to offer to someone that isn't willing to have a open mind and learn. :notrolls2:

Someday you will learn the hard way :newbie: 2000.
2000 un-skirted

 

[2000ssm6]

Mess with the bull..........

2000 when you pull your head out of that big hole on your backside and have a open mind, only then will you see the light and begin to learn.
Till then just make sure your skirt isn't to tight being a cheerleader so you might have a chance of thinking on your own someday.
Nuff said by me on the subjects because, I have nothing more to offer to someone that isn't willing to have a open mind and learn. :notrolls2:

Someday you will learn the hard way :newbie: 2000.
2000 un-skirted

That's ok if you want to give up. Mess with the bull, you get the horns son. Sorry you have got them:biggrinbounce2:

I have been reading some of your old posts, before you were the big pro chainsaw racer. I just can't see where you have changed

btw good pics, I'll have one when I get home for ya!!!

 

[Cut4fun]

I have been reading some of your old posts, before you were the big pro chainsaw racer. I just can't see where you have changed

Nope no pro here, just a homeowner with a new hobby looking for a adrenaline rush before I pass on someday.

Just call me a NEWBIE or Rookie, but I am williing listen and learn from all that has info that is useful for my addiction of fast saws, unlike some.