I saw it on Ebay/Craigslist

[AGoodSteward]

Someone please go get this one!! Wrap 044 for only $300, if it wasnt 4 hours away I would in a heartbeat

http://eastidaho.craigslist.org/for/5791143614.html

Been trying this all morning with no answer. Gonna get it if I can.

 

[AGoodSteward]

Someone please go get this one!! Wrap 044 for only $300, if it wasnt 4 hours away I would in a heartbeat

http://eastidaho.craigslist.org/for/5791143614.html

Gone. 8(

 

[undee70ss]

Homelite Super 650
http://akroncanton.craigslist.org/grd/5793574388.html

 

[backhoelover]

Homelite Super 650
http://akroncanton.craigslist.org/grd/5793574388.html

buy a saw get a free gun lol

 

[brandonstc6]

A husqvarna 250 farmboss? Really?
Must be a really rare saw,

Husqvarna farmboss $140
http://hattiesburg.craigslist.org/grd/5741904574.html



Sent from my iPhone using Tapatalk

 

[67L36Driver]

Cut away Homelite blower.


2 Stroke learning aid $30
http://kansascity.craigslist.org/grd/5793758878.html

via cPro for Craigslist
iOS: http://tinyurl.com/cPro-iDevice
Android: http://tinyurl.com/CL-Android

 

[kr5258]

Echo twin Charlestown RI
http://providence.craigslist.org/grd/5796878850.html

 

[atpchas]

Given the active thread on building AM MS660s, I thought this ebay item might be of some interest. The seller makes a big deal of all the OEM parts he used, most of which are cosmetic stuff - labels, etc. My guess is there will be no takers at $805 BIN.

http://www.ebay.com/itm/131919719003



Up for sell is a Stihl MS660 Magnum chainsaw builded with NEW OEM and high quality after market parts this (will put a list of OEM parts down below) chainsaw runs as it should starts idles oils and rev's to full throttle with no problems. I did use a 54mm cylinder and piston set this is a great saw for many things, dropping tress, firewood, milling..... Etc.. This is the power head only no bar or chain so you can get the right bar for whatever job you need it for will also come with a New OEM set of tools as shown in pictures


About the saws I build is that I don't cheap out I try to get OEM parts most people just go fully Aftermarket parts to make a bigger profits on their saws.. I try to make it look as close to original for the people that want to have that authentic Stihl look, (on the muffler plate I had to paint with high temperature paint do that when I purchased it it got all scratched during shipping but EVERY part on this chainsaw is NEW. Here is the OEM parts list that was installed in the chainsaw


-model plate MS660, 1122 967 1506

-slide 1122 141 4000

-reflector foil 1124 084 8300

-magnum decal 0000 967 1593

-foil 1128 084 8302

-oil hose 1122 647 9400

-oil pickup body 1117 640 3800

-fuel hose 1124 358 7700

-fuel pickup body 0000 350 3504

-elbow 1122 353 2600

-bushing x3 0000 963 0808

-hose 0000 937 5004

-fuel cap 0000 350 0509

-oil cap 0000 350 0520

-woodruff key 1120 036 8500

-plug x2 1125 791 7306

-plug 1122 791 7300

-plug 1122 791 7301

-bushing 1124 792 5500

-inner side plate 1128 664 1001

-hexagon nut M5 x2 9216 263 0700

-hex nut (flywheel) 9211 260 1340

-3/8-8 sprocket 0000 642 1121

-tool set 1121 890 1400

-impulse line 1127 141 8600

-and all warning labels shown on chainsaw



I will send copy of receipts with chainsaw for proof of OEM parts, I buy all my parts off a local Stihl dealer


Back to the saw this are not stock pictures and the chainsaw in the pictures will be the one you will be getting in the mail it was tuned up at 740 elevation in Lotus CA (i ran a full tank of 40:1 mix gas for tuning) so depending on your area you may or may not have to tune it a little if you have any questions please contact me by email


I've build many saws over the years and repairs many more I take the time to check and inspect every part and everything before I put a saw up for sell and up to this date I have never had a problem with any saw but I will not be responsible for poor mixture of fuel or miss using of the saw or any injuries if you buy this saw you should be very aware that this is a very strong chainsaw and is not to be played with and that you do know how to mix the fuel properly this chainsaw is recommended to use 40:1 fuel mix! This are great saws and almost run just as good at the Actual Stihl MS660 you can look up the reviews on YouTube there is many videos of this


If you have any question please ask before buying


PLEASE NOTE: IM NOT RESPONSIBLE FOR INJURIES, NOT PREMIXING THE SAW, AND PARTS SWAPPERS



A guy brought this up to my attention and NO this is not a OEM Stihl chainsaw it is a after market chainsaw the clones the STIHL MS660 that's had Stihl OEM parts I have a few of this chainsaws and I had a few problems with some of the aftermarket parts and changed them out for OEM to make it operate better and that is what your buys a aftermarket saw with some Stihl OEM parts and it's all new parts both after market and STIHL parts

 

[Philbert]

Could be a good deal on a chain grinder for someone in S Minnesota

***EDIT - a little TOO good!
Spoke to seller - it is an Italian, Tecomec grinder, but he meant to list it at $100. Still a good deal if in good condition - sold for around $260 new.***


Not sure if this is a clone model or a Tecomec product; but either a good deal, or a smoking deal if it is in good shape.

http://minneapolis.craigslist.org/dak/tls/5802510978.html

Philbert

 

[brandonstc6]

I saw this one eBay. I have never heard of dynamark. The saw looks strange, did dynamark get this made by another company. Could this just be a made in China saw?

Sent from my iPhone using Tapatalk

 

[67L36Driver]

I saw this one eBay. I have never heard of dynamark. The saw looks strange, did dynamark get this made by another company. Could this just be a made in China saw?

Sent from my iPhone using Tapatalk

Lombard Little Lightning.

Made them in 2.2" and 2.4" versions. Along with their standard AL & AP 42 saws of 68cc.

I have IPL if anyone needs a copy.

 

[Philbert]

Looks very Homelite-like. Were Homelite and Lombard saws similar?

Philbert

 

[brandonstc6]

Lombard Little Lightning.

Made them in 2.2" and 2.4" versions. Along with their standard AL & AP 42 saws of 68cc.

I have IPL if anyone needs a copy.

That make sense. It definitely an interesting saw.


Sent from my iPhone using Tapatalk

 

[67L36Driver]

The small Lombards are not seen as often as their big brothers.

Iffin' I didn't already have sixty saws in my collection I would have hit the BIN before I replied to this thread.

 

[brandonstc6]

The saw has no spark, it would probably be hard to find a ignition. I have too many saws already as it is, but it is definitely tempting


Sent from my iPhone using Tapatalk

 

[astnmacgto]

Found a homelite 450 on Craigslist for 150 bucks, says it runs, don't know if it's still there.
https://columbiamo.craigslist.org/grd/5756369847.html

 

[MnSam]

http://eauclaire.craigslist.org/grd/5804386449.html

 

[Mattyo]

Best of luck finding more of these, husqvarna 262 carb bolts. This guy has 10 pairs!

http://www.ebay.com/itm/OEM-Husqvar...694488?hash=item25c482c558:g:pG4AAOSwZVlXufeL

 

[Chris J.]

One hour, my @$$.

http://houston.craigslist.org/wan/5805610922.html

 

[barton174]

One hour, my @$$.

http://houston.craigslist.org/wan/5805610922.html

HAHAHAHAHA!!!!!