T
I saw it on Ebay/Craigslist
- Thread starter trimmmed
- Start date
Help Support Arborist Forum:
T
Teddy.Scout
Guest
Why pull it when you can drive it!!!!
http://cgi.ebay.com/LOG-SPLITER-YOU-CAN-DRIVE-YOU-NEED-NICE-/150441170047?cmd=ViewItem&pt=US_Chainsaws&hash=item2306fe147f
http://cgi.ebay.com/LOG-SPLITER-YOU-CAN-DRIVE-YOU-NEED-NICE-/150441170047?cmd=ViewItem&pt=US_Chainsaws&hash=item2306fe147f
T
Teddy.Scout
Guest
T
Teddy.Scout
Guest
Mall, with back scrather chain!!!!
http://cgi.ebay.com/VINTAGE-MALL-2-MAN-CHAIN-SAW-/190394849863?cmd=ViewItem&pt=US_Chainsaws&hash=item2c546ada47
http://cgi.ebay.com/VINTAGE-MALL-2-MAN-CHAIN-SAW-/190394849863?cmd=ViewItem&pt=US_Chainsaws&hash=item2c546ada47
T
Teddy.Scout
Guest
STIHL 92CC MS660 MAGNUM IN EXTREMELY NICE SHAPE. SAWS HAS NOT SEEN MUCH USE BECAUSE IT GOT BACKED INTO BY A PICKUP WHEN IT WAS ABOUT 6 MONTHS OLD. NOTHING BIG JUST THE STARTER, HANDLE BAR , BRAKE LEVER , CLY COVER AND A DENT IN THE MUFFLER WHICH WAS REPLACED . THAT WAS IT. NO DAMAGE WHAT SO EVER TO CRANKCASE OR CYLINDER. IT SAT IN MY SHOP ALL WINTER AND I ROBBED A FEW PARTS OFF IT FOR OTHER SAWS AND WAS GOING TO PART IT OUT AND FINALLY SAID TO HECK WITH IT AND BOUGHT EVERYTHING AND PUT IT BACK TOGETHER. SO THERE ARE A TON OF NEW PARTS ON IT I DID ALSO USE A FEW USED PARTS BUT ONLY NICE ORIGINAL PARTS. NO AFTER MARKET JUNK. THE CARBURETOR AIR MIXTURE LOCKS HAVE BEEN MODIFIED SO THE CARB IS FULLY ADJUSTABLE NOW BUT STILL RETAIN STOCK APPERANCE AND THE MUFFLER OUTLET HAS BEEN ENLARGED TO THE SIZE OF THE OLDER 066'S. THE STIHL 36" BAR AND 3/8 SKIP TOOTH CHAIN ARE BRAND NEW. IF SOMEONE DOES NOT WANT IT WITH THE 36" BAR I CAN SUBSTITUTE IT FOR A NEW 25" AND THE SAME GOES FOR THE FULL WRAP HANDLE BAR TO A NEW STANDARD ONE. SAWS GOT A TON OF POWER AND IS EXTREMELY RESPONSIVE. ANY QUESTIONS PLEASE ASK BEFORE BUYING. BAR WILL BE SHIPPED SEPERATE AND SAW WILL BE DRAINED OF ALL FLUIDS AND PACKED REAL WELL SHIPPED OUT THE SAME DAY IF BEFORE 3PM EST. PAY PAL ONLY. THIS IS A USED SAW SOLD WITH NO WARRANTY. LOTS OF PICTURES SO LOOK IT OVER GOOD. THE SAW DOES NOT COME WITH AN OWNERS MANUAL BUT YOU CAN GET THEM ON LINE FOR FREE. THAT IS IF THEY WOULD GET THEIR HEADS OUT OF THIER ASS I ORDERED ONE FOR IT AND THEY SENT ME A MANUAL FOR AN FS 90 TRIMMER. CARB MAY OR MAY NOT NEED TO BE READJUSTED FOR YOUR ELEVATION IF YOU DON'T KNOW HOW TO DO IT HAVE SOME ONE WHO IS QUALIFIED DO IT. NOT YOUR NEIGHBOR WHO THINKS HE KNOWS EVERYTHING. THANK YOU.
Why pull it when you can drive it!!!!
http://cgi.ebay.com/LOG-SPLITER-YOU-CAN-DRIVE-YOU-NEED-NICE-/150441170047?cmd=ViewItem&pt=US_Chainsaws&hash=item2306fe147f
THIS IS A RARE LOG SPLITER YOU CAN ACTUALY SIT DOWN AND DRIVE TO YOUR WOOD PILE AND BACK. BUILT BY BEAN BUGGY YEARS AGO. IT RAN AND DROVE A FEW YEARS AGO AND WILL AGAIN. IT NEEDS LITTLE TLC.
BUILT VERY STRONG WITH A GREAT SPLITTER HEAD AS THE PHOTO'S SHOW. HAS A 8 HP BRIGGS GAS ENGINE PLUS HYDRASTATIC DRIVE.
IT CAN GET THE MAIL AND ALSO BE DRIVEN IN A PARADE OR AT A TRACTOR SHOW. YOU COULD ADD A HITCH ON THE BACK FOR A TRAILER TOO.
PLEASE BID ONLY IF YOU ARE A BUYER.
REMEMBER; "THEY DON'T MAKE EM LIKE THIS ANYMORE".
McCulloch Susper Pro 125 chainsaw with 42 inch 3/8 .063 chisel skip chain.
Description: Used saw, was rebuilt in the 70's and sit for years. I put fresh mix and started right up. May need tuning if using for commercial cutting.
This is a MALL 7G TwoMan Chainsaw with 24" bar w/Scratcher Tooth Chain.I bought this saw from a guy that was 81 years old,said he had always kept it in his garage.He said it ran when he put it away.I believe it has the orginial paint.Everything is still hooked up and works,throttle trigger,oiler pumps oil,chain turns on bar,saw turns over,bar swivels and locks into place,all the parts are there.Only damage to saw is the handle bar by engine is cracked and repaired with a brace and tip of saw (handle on end of bar)chewed out and broken from chain.With a little work,this could be a running chainsaw.
Here we are offering an old Mall OMG chainsaw that is in good shape over all.
It has alot of compression and fire ,although the boot on the coil wire is gone so, when the cover is closed it shorts the spark.It also needs a air filter assembly and the cover on the lower right that goes over the carb and holds the choke pull to the saw itself.
The chain is a 2 piece tooth chain and appears to be in pretty good shape and the bar measures 24 inches from the saw motor.
It has an assembly number of 42230 and a serial number of 24510.
It does have good clear marking
I think this saw should run with a little help, it is more then I want to pull on.
valekbrothers
ArboristSite Guru
THIS IS A RARE LOG SPLITER YOU CAN ACTUALY SIT DOWN AND DRIVE TO YOUR WOOD PILE AND BACK. BUILT BY BEAN BUGGY YEARS AGO. IT RAN AND DROVE A FEW YEARS AGO AND WILL AGAIN. IT NEEDS LITTLE TLC.
BUILT VERY STRONG WITH A GREAT SPLITTER HEAD AS THE PHOTO'S SHOW. HAS A 8 HP BRIGGS GAS ENGINE PLUS HYDRASTATIC DRIVE.
IT CAN GET THE MAIL AND ALSO BE DRIVEN IN A PARADE OR AT A TRACTOR SHOW. YOU COULD ADD A HITCH ON THE BACK FOR A TRAILER TOO.
PLEASE BID ONLY IF YOU ARE A BUYER.
REMEMBER; "THEY DON'T MAKE EM LIKE THIS ANYMORE".
I'm only about 30 miles from this if anyone is interested.........
With a port job and a muff-mod that baby may hit 3mph.
SPIKE5400
ArboristSite Member
20" Nikita Chainsaw - $200 (Wayne, oakland)
--------------------------------------------------------------------------------
Date: 2010-05-06, 6:09PM EDT
Reply to: [email protected] [Errors when replying to ads?]
--------------------------------------------------------------------------------
I have a 20" Nikita Chainsaw that works beautifully but i simply need to get rid of. Asking 200.00 obo
313.556.3346
248.763.0334
ask for Chris
(lol)
--------------------------------------------------------------------------------
Date: 2010-05-06, 6:09PM EDT
Reply to: [email protected] [Errors when replying to ads?]
--------------------------------------------------------------------------------
I have a 20" Nikita Chainsaw that works beautifully but i simply need to get rid of. Asking 200.00 obo
313.556.3346
248.763.0334
ask for Chris
(lol)
RandyMac
Stiff Member
cleb
ArboristSite Member
MostShady1
Addicted to ArboristSite
Echo chainsaw cs-8000
http://delaware.craigslist.org/tls/1708892681.html
ECHO CHAINSAW CS-8000 USED TO CUT UP 1 TREE THAT FELL DOWN ON MY PROPERY PERFECT CONDITION--- I PAID $849.00.I HAVE NO MORE USE FOR IT ..24 INCH BAR AND CHAIN IN PERFECT AS LIKE NEW CONDITION ........$600.00........ THIS IS NOT FOR BEGGINERS ..VERY POWERFUL 80CC.FITS UP TO A 36INCH BAR .THIS IS THE BIGGEST CHAINSAW ECHO SELLS PROFFESIONAL NO SCAMMERS ..NO B.S... AGAIN THIS IS NOT A BEGGINERS SAW..
http://delaware.craigslist.org/tls/1708892681.html
ECHO CHAINSAW CS-8000 USED TO CUT UP 1 TREE THAT FELL DOWN ON MY PROPERY PERFECT CONDITION--- I PAID $849.00.I HAVE NO MORE USE FOR IT ..24 INCH BAR AND CHAIN IN PERFECT AS LIKE NEW CONDITION ........$600.00........ THIS IS NOT FOR BEGGINERS ..VERY POWERFUL 80CC.FITS UP TO A 36INCH BAR .THIS IS THE BIGGEST CHAINSAW ECHO SELLS PROFFESIONAL NO SCAMMERS ..NO B.S... AGAIN THIS IS NOT A BEGGINERS SAW..
STEVEGODSEYJR
ArboristSite Guru
I have a old homelite chain saw it used to work but the string is out of it my uncle used it when he was ten now he is 56 so i dont know what year it is really
Similar threads
