im new and dont know

[HarleyManning7x]

well my boss/friend jason brozic aka woodchucker81 got me into saws. so i went and bought one. its nothing big it a 35cc moccollic<--spelled wrong prolly-. so it was only 30 bucks at a second nad shop. so i was wondering about the whole porting saws and ####. can any mods be done to this saw if so let me know.

 

[ddhlakebound]

seems too pricey for me.....what did you get in at the first nad shop?

and you really don't need to know ####....that's why you hire a plummer.

 

[wigglesworth]

Be careful in them nad shops.....

 

[rarefish383]

You guys are rough. I must be a little dislectic, I read that as "hand". Now I'm wonderin what is available at a second nad shop.

Welcome to the site, Joe.

 

[scattergun13]

Apparantly you can get the "mccollic" there and if I'm not mistaken a second nad. We should tell groundman about this, he could use some extra nads.:hmm3grin2orange:
Anyway, welcome to the site...

 

[Jkebxjunke]

Apparantly you can get the "mccollic" there and if I'm not mistaken a second nad. We should tell groundman about this, he could use some extra nads.:hmm3grin2orange:
Anyway, welcome to the site...

ROFLMAO!!

Welcome to the site... and congrats on you first saw.... but I must warn you... that if you spend too much time here you will catch the dreaded CAD* disease. and it is followed closely by the horrible EBAS**.






*CAD= Chainsaw Addiction Disorder
**EBAS= Empty Bank Account Syndrome

 

[WoodChuck'r]

well my boss/friend jason brozic aka woodchucker81 got me into saws. so i went and bought one. its nothing big it a 35cc moccollic<--spelled wrong prolly-. so it was only 30 bucks at a second nad shop. so i was wondering about the whole porting saws and ####. can any mods be done to this saw if so let me know.

Yo Yo Yo!!!

 

[North by Northwest]

Newbie

Hey Folks just Registered and wanted a quick reply to the Best Selection of a New Saw Husky Rancher 455 or Stil Farm Boss 310 . Your advice and reason for preference would be appreciated . I cut Firewood Primarily Maple , Oak and Birch , Cedar for Kindling ...Thanx !

 

[Treecutr]

Yeah nad shops can really hurt, even just a little clip is bad.

Broken, I have a 310, it's great for firewood. I leave it on the ground for bucking up large limbs/ trunk pieces into firewood.

 

[North by Northwest]

Tree: Thanks for the information , I have eyeballed both Manf. and Models for a few yrs . Just one further question is there any online Supply (Discount) Store that you would recommend for Reliable Quality and Discounted Pricing or is it your advice to Deal Dealer Direct ! Thanx again !

 

[Mr. Woods]

Yo Ken bro!

You may have more luck in the chainsaw section. It's a little further down the page. Loads of saw meisters down there.

 

[HarleyManning7x]

i ment second hand shop* but anyways its a decent beater saw. its mainly for small triming or cuting stuff that i usally have to use an axe on. so now i have a great excuse for runing a 2stroke none stop. for one the oil im runing is klotz r50 witch by itself smells amazing and makes any 2smoker run smooth, plus i get to use somthing that cuts wood, is loud as hell, and it helps me drown out the others around the house. so yeah im a saw head now thanks to woodchucker im pretty sure in the near future ill be looking for a bigger badder saw. untill then ill be playing with my little 35cc mini saw catch ya later seeya bye.



-Harley

 

[HarleyManning7x]

You guys are rough. I must be a little dislectic, I read that as "hand". Now I'm wonderin what is available at a second nad shop.

Welcome to the site, Joe.

Thanks for being a little dislectic and finding the word hand instead of "nad".

 

[scattergun13]

Thanks for being a little dislectic and finding the word hand instead of "nad".

That was great!:hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:

 

[HarleyManning7x]

thanks for the welcome. so whats the best forum to look at for a newbie like myself.