Jonsered Chainsaws

[jnl502]

Just seals. Im not up for splitting it lol

Sounds like a pain just for seals. Just send that wreck south and I will take care of it. Even though it don't run it will look nice with my 930:msp_rolleyes:
jnl

 

[Modifiedmark]

Got my 920 all finished up and got to get it all tuned in today since its the first time I had the chance since it was muffler modded and such. It runs good, very good now.

Does anyone know what the stock no load speed is supposed to be on these? Not a big deal as its tuned well right now, just curious to know what a unmodded one is supposed to turn. This one seems right on at 12200

There are some pics I posted in the thread I had going before on it.

http://www.arboristsite.com/chainsaw/195429.htm

 

[Cantdog]

Got my 920 all finished up and got to get it all tuned in today since its the first time I had the chance since it was muffler modded and such. It runs good, very good now.

Does anyone know what the stock no load speed is supposed to be on these? Not a big deal as its tuned well right now, just curious to know what a unmodded one is supposed to turn. This one seems right on at 12200

There are some pics I posted in the thread I had going before on it.

http://www.arboristsite.com/chainsaw/195429.htm

I don't have that info here Mark, but I do at the shop. If someone doesn't chime in with the number before tomorrow morning I'll get it and post it here. Spike60 will probably beat me to it though!!LOL!!! Glad to hear you got it running good!!!

 

[PB]

Got my 920 all finished up and got to get it all tuned in today since its the first time I had the chance since it was muffler modded and such. It runs good, very good now.

Does anyone know what the stock no load speed is supposed to be on these? Not a big deal as its tuned well right now, just curious to know what a unmodded one is supposed to turn. This one seems right on at 12200

There are some pics I posted in the thread I had going before on it.

http://www.arboristsite.com/chainsaw/195429.htm

Well, the listed RPM is 12,200 so it is probably running good! It is also the same for the 820, 830 and the 930.

 

[J.Walker]

Came home from the Ky. GTG with another Jonsered saw and some other great metal.
When it's cleaned up a little and put back together I'll post some shots!

.

 

[JRepairsK70e]

leave it to jack to find a heated 2171 in kentucky!!! ,,stop cleaning and start cuttin lol ....whats it gonna be when it grows up?? i like my warm handles !!!

 

[Cantdog]

I don't have that info here Mark, but I do at the shop. If someone doesn't chime in with the number before tomorrow morning I'll get it and post it here. Spike60 will probably beat me to it though!!LOL!!! Glad to hear you got it running good!!!

Thanks Lee....... I knew someone would beat me to it!!

 

[Modifiedmark]

Thanks Lee, seems my ear hasn't lost its touch. Thought the muffler mod might have let it pick up a few rpm's but I guess not judging by the plug.

Seems the power output is noticeable though after the mod.

 

[DSS]

Is this a good firewood saw? Picked it up today and don't know much about them. Guy told me he got new rings put in it and only used it for a short time and it quit so he bought a 365.

Anyway, cleaned it up a little, it had spark, 160 psi and popped on a prime so I went through the fuel system. I know why it quit, the carb was full of sawdust. The well the inlet screen sits in was full to the top. Cleaned all that up and it runs good. It needs a new chain, a/v mounts and the gas cap leaks, I assume it just needs a new o ring. If they are a good saw I'll probably fix it up and keep it.

I'm only into it for $30 so the bar is worth that almost.:msp_smile:

 

[PB]

They are good saws and very comparable to the Husky 61 in just about every way. For $30 it is well worth it.

 

[PB]

RPM Chart

Chart has all the RPM settings. View attachment 231394

 

[wendell]

Dang, Chris, that is a tiny bar. But I guess since there aren't any trees in Greenland, it really doesn't make much difference, does it?

 

[tmessenger]

I had a nice clean one I sold last fall for $180 so yeah for $30 you stole it, they are great running durable saws by the way.

Is this a good firewood saw? Picked it up today and don't know much about them. Guy told me he got new rings put in it and only used it for a short time and it quit so he bought a 365.

Anyway, cleaned it up a little, it had spark, 160 psi and popped on a prime so I went through the fuel system. I know why it quit, the carb was full of sawdust. The well the inlet screen sits in was full to the top. Cleaned all that up and it runs good. It needs a new chain, a/v mounts and the gas cap leaks, I assume it just needs a new o ring. If they are a good saw I'll probably fix it up and keep it.

I'm only into it for $30 so the bar is worth that almost.:msp_smile:

 

[DSS]

Dang, Chris, that is a tiny bar. But I guess since there aren't any trees in Greenland, it really doesn't make much difference, does it?

Meh. I may cut blocks of ice with it. I got a 20 and a 24 to fit it iffin it gots the nads.:msp_thumbup:

 

[PB]

Meh. I may cut blocks of ice with it. I got a 20 and a 24 to fit it iffin it gots the nads.:msp_thumbup:

I might have the nads for a 20" but it doesn't balance well with anything more than 18".

 

[Modifiedmark]

Dang Chris I guess it was a good day for both of us. I picked up that same saw.

I PMed Robin earlier to ask info on them as well. Looks to be a pretty good saw. This one cost me a little more then yours but it come with a 20" on it plus a 24" bar, 3 chains, scrench and file with holder.

I think this one will need crank seals as it starts right up and runs pretty good but dose that goofy stuff when on its side or if you tilt it forward fast. Shouldnt be too hard a deal to fix.

I kind of thought it would have its hands full with a 24" also but I wouldnt turn down the bar with the deal.

 

[DSS]

Dang Chris I guess it was a good day for both of us. I picked up that same saw.

I PMed Robin earlier to ask info on them as well. Looks to be a pretty good saw. This one cost me a little more then yours but it come with a 20" on it plus a 24" bar, 3 chains, scrench and file with holder.

I think this one will need crank seals as it starts right up and runs pretty good but dose that goofy stuff when on its side or if you tilt it forward fast. Shouldnt be too hard a deal to fix.

I kind of thought it would have its hands full with a 24" also but I wouldnt turn down the bar with the deal.

Nice grab Mark. Yours is quite a bit cleaner than mine. I'm gonna try a 20 on mine, I think 24 would be too much as well, and I don't own an 18. Where's the best place to get A/V rubbers online? I wouldn't even try a dealer around here.

 

[PB]

Mark, those saws are quite possibly the easiest seals to change on a saw.

 

[PB]

Nice grab Mark. Yours is quite a bit cleaner than mine. I'm gonna try a 20 on mine, I think 24 would be too much as well, and I don't own an 18. Where's the best place to get A/V rubbers online? I wouldn't even try a dealer around here.

You should be able to get those from Baileys or Northwoods. I am almost positive that they are the same a/v mounts as the Husky 268/266.

http://baileysonline.com/itemdetail.asp?item=QH+50177+3501&catID=
http://northwoodsaw.com/store/index.php?l=product_detail&p=315

 

[DSS]

You got a real dawg with yours too, I got those two goofy smooth ones you see laying on the bench, whatever good they are.