lets c your wood hauler pictures

[rarefish383]

I (re)built this 5x8 trailer from a rusted frame earlier this summer. It only has a 3500# load capacity but it works for my needs for now. I can haul about a cord of green at a time. The tow rig is a 2008 Tundra with the 5.7L and 6spd. This thing is a beast!

That turned out nice. I just put all new 5/8 ply wood on my little 4X6 trailer, but was too lazy to paint it, Joe.

 

[rarefish383]

I just got my tractor back from being tuned up, runs much better now. Here's my little trailer with new plywood, it looks much nicer now, Joe.

 

[WoodTick007]

I (re)built this 5x8 trailer from a rusted frame earlier this summer. It only has a 3500# load capacity but it works for my needs for now. I can haul about a cord of green at a time. The tow rig is a 2008 Tundra with the 5.7L and 6spd. This thing is a beast!

I was looking at your trailer and trying to figure out where I had seen that type of frame design before. . .so I showed to my brother and he knew immediately. Someone took a metal frame from a twin size bed and welded an axle and tongue to it. . . that is too funny. Hopefully you only use it offroad and not on surface streets/trunkways/or freeways.

My new 5x8 galvanized and new 5x10 galvanized trailers
Also have an older 5x10 trailer I'm rebuilding (1st pic)View attachment 525797 (3rd pic).
All have 3500lb axles.
View attachment 525795 View attachment 525796

Sent from my LG-D851 using Tapatalk

 

[mtnwkr]

I was looking at your trailer and trying to figure out where I had seen that type of frame design before. . .so I showed to my brother and he knew immediately. Someone took a metal frame from a twin size bed and welded an axle and tongue to it. . . that is too funny. Hopefully you only use it offroad and not on surface streets/trunkways/or freeways.



Sent from my LG-D851 using Tapatalk

No, it certainly isn't. I'm not an idiot. It was made in 1992 by the Tork trailer co. here in Washington. The angle is all 3x3x.25" and Is very stout. It is also a tilting frame design but I have it bolted up ridged. It has the load limit of 3500# stamped in the frame next to the vin. Thanks.

 

[Boomer 87]

here's my hauler 69' c20 250L6 and 4 speed with granny low, not fast but he'll pull hell out by the roots if you can hook it to the ground.

 

[thumbilly]

I usually haul the trailers with a tractor but can't find a pic right now.

So I've since upgraded a tad

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Ronaldo]

So I've since upgraded a tad

Sent from my SAMSUNG-SM-G890A using Tapatalk

I think I see a tractor!!!

 

[Erik B]

I think I see a tractor!!!

Nah, you are seeing a new car behind that big hunk of metal

 

[Ronaldo]

Nah, you are seeing a new car behind that big hunk of metal

Oh yea, maybe the camouflage confused me a bit!

 

[Logger nate]

Well at the risk of being sent to the you suck thread.....nicest pickup I've ever owned, not sure I'm going to haul much wood in it... might have to invest in some tires for the old horse trailer to haul wood, just put the saws in the pickup, after they're cleaned.....

 

[Haywire]

Dang, Nate! You got yourself a nice one there!

 

[Logger nate]

Thanks, it's too nice for me, bought it from a friend that put a lot into it, it's like new with lots of mods. Nice to have something I don't have to work on all the time.

 

[thumbilly]

Nice to see the 5 ton made the cover of the thread. Shoulda snapped a pic of her loaded this morning but I was in a hurry. She carries 3 full cord and the springs don't even flex.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[sirbuildalot]

Thumbilly, Your customers must do a double take when you show up with that beast

 

[thumbilly]

Yeah most ask if I have a big enough truck. I've tested the 6 wheel drive and the winch already and I've only had it a couple weeks

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Dieseldash]

5 tons are beast.

 

[thumbilly]

Drives like a dream though

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[jasult]

I get paid to do this but I get to burn it

 

[Wrenchbender16]

 

[captjack]

2001 Ford Excursion - 7.3 with mods 360k and going - 14x7 dump and jd 5400 - does everything i need it to