Mastermind Meets The Stihl 084

[garyischofield]

poplar/aspen

sure looks like aspen/poplar

 

[jropo]

For those who don't know this is my saw. I have never had a fully ported saw before. I have a dolmar 5105 stock that's the closest to a ported saw I have owned until now. I'm gonna have to take it easy at first on this saw.

Congrads! Looks like you have a heck of a saw on your hands!

I would suggest some safety gear.

 

[Mastermind]

The video was deceiving.What type of wood was this oak,maple, ash? I meant know disrespect, Ken

None taken.

Poplar.

For those who don't know this is my saw. I have never had a fully ported saw before. I have a dolmar 5105 stock that's the closest to a ported saw I have owned until now. I'm gonna have to take it easy at first on this saw.

Glad you showed up to lay claim to this beast.......she's a runner Josh, do be careful with it.

sure looks like aspen/poplar

Yep.......poplar

Congrads! Looks like you have a heck of a saw on your hands!

I would suggest some safety gear.

I agree.

 

[GBD]

175psi
97 Ex
122 Tr
74 In

Nice and short transfer, healthy blowdown, bet it`s torquey!:msp_thumbup:

 

[o8f150]

[video=youtube;M1PG0V0Ftg0]http://www.youtube.com/watch?v=M1PG0V0Ftg0&feature=youtu.be[/video]

what a slow pos :msp_biggrin::msp_biggrin:
good job

 

[zogger]

For those who don't know this is my saw. I have never had a fully ported saw before. I have a dolmar 5105 stock that's the closest to a ported saw I have owned until now. I'm gonna have to take it easy at first on this saw.

--oh...I think I know where I can scare up about a three foot diameter oak for you to "take it easy on"..HAHAHAHAHA..maybe even a four footer...

 

[josh1981]

Thanks. I got chaps forest helmet cut resist shirt and Kevlar gloves. And boots.

4 foot oak. Wow!

 

[watsonr]

That saw is just sick!!! Doesn't look like it even slowed down. Nice work Randy.

 

[hdbill]

Jesus Jones, I had just made my mind up to sell my 084 and my two 038s. I dont think I will sell the 84 now and I probally shouldnt read what you did to the 038 or I will be keeping them too. You the MASTER

 

[Chris J.]

It will do a faster cut.........Jon was afraid of the chain derailing and wouldn't really push.

A few years back I went to a Texas GTG where the host, Aggiewoodbutchr, had a 084 modded by ***. He used it for milling, but for kicks he ran it with a 18" b&c (IIRC), but it kept throwing the chain. There's a thread around here, but I don't recall if I got any vid of the 084 with 18" b&c.

 

[Mastermind]

A few years back I went to a Texas GTG where the host, Aggiewoodbutchr, had a 084 modded by ***. He used it for milling, but for kicks he ran it with a 18" b&c (IIRC), but it kept throwing the chain. There's a thread around here, but I don't recall if I got any vid of the 084 with 18" b&c.

I had to modify this bar quite a lot to fit the large pattern of the 084.......plus it was tailed to match a 9 pin. It stays on pretty well. I've been running it this morning.....man you can stand on that big bastard!!!!! :msp_thumbup:

 

[Roll Tide]

I had to modify this bar quite a lot to fit the large pattern of the 084.......plus it was tailed to match a 9 pin. It stays on pretty well. I've been running it this morning.....man you can stand out that big bastard!!!!! :msp_thumbup:

I could only imagine what you could do with that saw.

 

[RedneckChainsawRepair]

Never had to mod a bar on large mount 084 till running 10T. 9's were no problem for stock lg mount bars.

I even had a couple bars shorter then 16" even though they ran 60dl chain (middle one). Other not shown was roller nose.

 

[Mastermind]

Never had to mod a bar on large mount 084 till running 10T. 9's were no problem for stock lg mount bars.

I even had a couple bars shorter then 16" even though they ran 60dl chain (middle one). Other not shown was roller nose.

This bar was not suppose to fit the 084. :msp_unsure:

 

[josh1981]

How's she running?

 

[Mastermind]

How's she running?

Fantastic.

 

[josh1981]

Great! She ready to be sent home?

 

[Mastermind]

Great! She ready to be sent home?

Shipping day is Friday.

 

[josh1981]

Great!

 

[Anthony_Va.]

So Josh, when you going to send that new 660 to Randy?