Dominating the show once again 
Mastermind worksaw's picture thread
- Thread starter Trx250r180
- Start date
Help Support Arborist Forum:
DexterDay
Addicted to ArboristSite
The Solo is the only one without a sticker
The 362 has the little one on the back.. Still getting used to it. I like the big ones on top, but my Pro sticker screwed that up. May have to peel that Pro off..
The 362 has the little one on the back.. Still getting used to it. I like the big ones on top, but my Pro sticker screwed that up. May have to peel that Pro off..
SquareFile
ArboristSite Guru
Looks like you need a 261c to go with that fine collectionThe Solo is the only one without a sticker
The 362 has the little one on the back.. Still getting used to it. I like the big ones on top, but my Pro sticker screwed that up. May have to peel that Pro off..
View attachment 362394 View attachment 362395 View attachment 362396
DexterDay
Addicted to ArboristSite
Who did Steven sell his to???I'm looking if you know someone
Mastermind
Work Saw Specialist
I'm looking if you know someone
One like this????
One tank of fuel thru it........16" 3/8
DexterDay
Addicted to ArboristSite
One like this????
One tank of fuel thru it........16" 3/8
Yeah, something like that
I passed on Stevens because I had another friend that had a 261 that said he may sell it and I didn't want to buy Stevens, only to have to buy the other guys 261 as well
Now that I know the other saw isn't gonna be sold, I probably should have pulled the trigger on Stevens. Who's is that saw? A member? Your personal?
Only a tank of gas? Sounds like one of my saws
Mastermind
Work Saw Specialist
It's one of mine.......and it's for sale.
SierraWoodsman
ArboristSite Guru
Did some more Sierra Firewooding today.
Here's couple videos of the 390/372.
Really enjoying these saws. Thank you Randy
Here's couple videos of the 390/372.
Really enjoying these saws. Thank you Randy
Is that fir that you are cutting? The saws definitely look good. I bought a wide discharge clutch cover for my 365 and it really helps when noodling. I swap it from my 365 to my 2165 to my 2171. I am not sure if it would fit the 390 though.
SierraWoodsman
ArboristSite Guru
It's "Green" Lodgepole pine.
both saws wearing 28" Tech-lite's
and pulling full comp square-ground chain with a 7-pin rim
I Love day's like this.
both saws wearing 28" Tech-lite's
and pulling full comp square-ground chain with a 7-pin rim
I Love day's like this.
SierraWoodsman
ArboristSite Guru
I've been wanting to try one of those (wide) clutch covers 372/390.
I've heard they really help in reducing noodles jams, which
would help out a lot. The 390 wearing a half-wrap handle bar noodles much better now.
If you know the P/N for that wide cover please pm it to me.
I've heard they really help in reducing noodles jams, which
would help out a lot. The 390 wearing a half-wrap handle bar noodles much better now.
If you know the P/N for that wide cover please pm it to me.
537 33 10 01 for Husky. 537 33 10 02 for Jonsered.
Thanks!
SierraWoodsman
ArboristSite Guru
Thank you!
Deets066
Firewood hack
I haven't heard much of that 064
bryanr2
Addicted to ArboristSite
Yeah, something like that
I passed on Stevens because I had another friend that had a 261 that said he may sell it and I didn't want to buy Stevens, only to have to buy the other guys 261 as well
Who's is that saw? A member? Your personal?
Only a tank of gas? Sounds like one of my saws
Stihl Livin bought mine. I beat him to it last Dec and he had inquired about it a few times thru PMs while discussing 50cc saws (trying to bait me I reckon)
. Our last conversation in May I said I wasn't going to sell it- that it was a keeper. But here recently I got to pick up my 254xp and 262xp (that were not MINT like they were described to me)
. Randy really made them into badazz saws and I figured the 254xp may be the most formidable 50cc+- saws I have ever run. It's in a condition that will be worked without a "care" while both the 261cm and 241cm are brand new (I put 1 tank thru the 261 and am 1/2 a tank into the 241cm). My favorite saw is the 288 and Id just as soon sling a big saw as a little one so I dont need a bunch sitting around. So anyways, Stihl Livin saw where I posted that I might cut a couple more loose, he inquired, and I told him the 261 and 241 were avail. And he jumped on the 261cm. Sold it with the 20'' Stihl .325 bar and chain that it came with (dgb84 had used a piece of masking tape and wrote my name on it and stuck it on the bar..... and it's still there... so no use) and Im sending a 16'' 3/8 GB bar I bought from Terry during his bar sale also. If anyone is interested in a 241cm- Ive got 1/2 a tank thru it. Prev owner put 2 thru it. Selling it with manual and tool kit, 16'' bar. Slightly used mounted chain and another stihl chain still in the box. Also including a Stihl scabbord that I had laying around.
I sent a PM on the 241.
All those Mastermind ported saws and no pics?
Similar threads
Want to Sell
MMWS MS660
