McCulloch Chain Saws

[8433jeff]

I have a big plastic 55cc McCulloch that I can't get parts for. I can't believe that a saw that's only around 5 years old or less has to be scrapped out because of 1 item, an oil pump gear.

More than a few of them, also branded Craftsman, have been set aside because of that. "McCulloch" is a mere myth now, not a manufacturer. Same with "Homelite". Try as they might, they seem unable to give "Poulan" the last bullet. I blame Husqvarna, though the saws you speak of are not made by them, at least not directly.

The Italian Macs are not that bad of saw, but they are not the easiest to work on, or find parts for.

Sadly, even other old line names are being drawn into the throw away after use foray, including Remington.

 

[a. palmer jr.]

More than a few of them, also branded Craftsman, have been set aside because of that. "McCulloch" is a mere myth now, not a manufacturer. Same with "Homelite". Try as they might, they seem unable to give "Poulan" the last bullet. I blame Husqvarna, though the saws you speak of are not made by them, at least not directly.

The Italian Macs are not that bad of saw, but they are not the easiest to work on, or find parts for.

Sadly, even other old line names are being drawn into the throw away after use foray, including Remington.

Actually, the saw was made by MTD. I called the factory, no parts for the saw there either. Maybe I could make a masonry saw out of it or maybe a pump...

 

[Overtrained]

Actually, the saw was made by MTD. I called the factory, no parts for the saw there either. Maybe I could make a masonry saw out of it or maybe a pump...

55cc could be fun bolted to a bicycle, it's got a clutch, weld a bike sprocket to it.

 

[a. palmer jr.]

55cc could be fun bolted to a bicycle, it's got a clutch, weld a bike sprocket to it.

With my size it would have to be at least 250cc...

 

[Somesawguy]

I have a big plastic 55cc McCulloch that I can't get parts for. I can't believe that a saw that's only around 5 years old or less has to be scrapped out because of 1 item, an oil pump gear.

Maybe you can modify one from a different saw.

 

[Warped5]

Who bought the Mac 125C in Columbus?

 

[Overtrained]

With my size it would have to be at least 250cc...

You would be surprised, 49cc mopeds do 30mph and they are heavy. Im a light 230lbs:msp_thumbup:

You could always run twin superpro 125's:hmm3grin2orange:

 

[Overtrained]

Who bought the Mac 125C in Columbus?

Wish i could say it was me!

 

[a. palmer jr.]

You would be surprised, 49cc mopeds do 30mph and they are heavy. Im a light 230lbs:msp_thumbup:

You could always run twin superpro 125's:hmm3grin2orange:

You are light, compared to me. I'm close to 275. That's not obese though, I'm really tall!

 

[rwoods]

Page 1010

POST you 1010s. Ron

 

[Overtrained]

POST you 1010s. Ron

Better yet post some new 10-10 vids making sawdust and noise

 

[thomas1]

What is the proper mount for a PM1000? Acres lists it as D005 but, Baileys lists it as D009. Did the D005 supersede the D009? Any modifications need to be made to run a D009 bar?

Sorry, I got no 10-10 vids.

 

[8433jeff]

Actually, the saw was made by MTD. I called the factory, no parts for the saw there either. Maybe I could make a masonry saw out of it or maybe a pump...

Yes, they are also the ones who are making Ryobi and Troy built, which are eerily similar to Poulan, which leads one to believe the big H has their mitts in there somewhere.

Hard to tell where anything is actually made anymore.

 

[Warped5]

What is the proper mount for a PM1000? Acres lists it as D005 but, Baileys lists it as D009. Did the D005 supersede the D009? Any modifications need to be made to run a D009 bar?

Sorry, I got no 10-10 vids.

I have a D176 on my PM1000, I do believe ....

I don't have any 10-10 video handy, but I do have this ..

 

[8433jeff]

What is the proper mount for a PM1000? Acres lists it as D005 but, Baileys lists it as D009. Did the D005 supersede the D009? Any modifications need to be made to run a D009 bar?

Sorry, I got no 10-10 vids.

D009 should bolt directly on. No mods needed, IIRC. Never heard of a D005.

 

[leeha]

The only 10-10 i have

Lee

 

[Steve NW WI]

POST you 1010s. Ron

Just gettin in on this page. I'll have to come back and add a pic of my new-to-me 10-10 tomorrow when I pick up my load-o-Mac.

 

[Overtrained]

Just gettin in on this page. I'll have to come back and add a pic of my new-to-me 10-10 tomorrow when I pick up my load-o-Mac.

Im sorry, all i see is red white and ****s...i mean blue!

 

[Overtrained]

The only 10-10 i have

Lee

That is one clean saw! Whats the deal with the green oil button? How common is that on a 10 series saw? I changed the top of my 2-10 for the tank/air box/handle top that has the green button. (not sure what that part is specifically called) Im curious if its off a 10-10, not that it really matters.

 

[Eccentric]

Here's the 10-10A that I donated to the Stumpbroke raffle. Unclemustashe has it now.