McCulloch Chain Saws

[xl130]

I seem to have spiked a Mcculloch fever lately. I picked up a few parts and parts saws. Trying to identify this carcass. No model tag in the carb box. Just these numbers stamped. 7-10 or a smaller cc saw??

 

[heimannm]

Frankensaw I'd guess, clutch is from a RH start, I don't see any starter pawls on the flywheel but the FW is from a left hand start saw. The fuel tank is a later PM type, serial number stamp looks like it's from an older saw. The pancake muffler and no compression release indicate it is a 54cc.

Mark

 

[xl130]

lol. Ok. It’s a “various parts” saw. I’m sure it has a few hidden Jen’s on it for future use.

Thanks!

 

[rwoods]

Well, no PM55 for me. I finally made contact with the seller of the nice yellow and black specimen that had caught my eye. Unfortunately, the seller.lost it in the flood that hit us.

Ron

 

[fossil]

Bummer Ron!

 

[Rallyeguy]

I just added a new "priced right" kit for 10 series saw refresh.

Walbro Carb kit, fuel line and filter, gaskets, and seals for a combined price lower than you can get on ebay. Add an oem filter, and a duckbill valve and get free shipping in the USA.

https://www.oldsawshop.com/McCulloch-Gasket-Seal-&-Carburetor-rebuild-kit-p714508763

 

[vinnywv]

That is a reasonable price for all that. Some ask more than that for crank seals. Plus you get stickers!

 

[JSMississippi]

I just added a new "priced right" kit for 10 series saw refresh.

Walbro Carb kit, fuel line and filter, gaskets, and seals for a combined price lower than you can get on ebay. Add an oem filter, and a duckbill valve and get free shipping in the USA.

https://www.oldsawshop.com/McCulloch-Gasket-Seal-&-Carburetor-rebuild-kit-p714508763

Excited for my order to be coming in the mail soon, looks like tomorrow or Saturday!

Tinkered a few minutes last night with the 10-10S and gave the fuel tank another flush and fill to confirm it was junk clogging the filter causing it to die. Idles and revs better now (well, well enough, still going to give it a refresh) and doesn't rev up when I turn it on either side (think I unsubmerged the filter turning to one side as it tried to die out until I flipped it back up). Looks like I might have blown a little carbon out the exhaust too.

Made a few more observations:

One of the bar plates is loose and hanging out back by the muffler. How it got back there I have no clue - isn't the exhaust area of the big clutch cover sectioned off entirely? Looks that way in the IPL.


Also pulled the spark plug again to peep in at the piston and cylinder - cylinder looks nice and shiny from what little I see, and piston top has carbon on it. However, I noticed the plug is a gasket seat style. This is not correct at all is it, shouldn't it be taper seat? I've got a Champion DJ6J on order.