McCulloch Chain Saws

[docholliday64]

Hey guys, I picked up a decent PM 850 recently and was wondering if anyone in the group has a handlebar (92707) that still has the padding on it (mine is pretty rough). Also looking for the frame brace grommet 93032. These are a few things I can see on the surface to get me started, I'm sure there will be more.....

 

[heimannm]

https://www.ebay.com/itm/1869001680...mmPcnfQQc/BneY3d8VwlHeSg==|tkp:Bk9SR5CbmaqeZQ

https://www.ebay.com/itm/1868903437...hplXpVKl3jrYxPUBazlLWqLQ==|tkp:Bk9SR5CbmaqeZQ

I have a few "aftermarket" options if you just want a functional piece and don't care if it is 100% original.



The full wrap bars are pretty pricey, even for used ones. If the only thing amiss with yours is the padding, consider stripping it off and using some cushion wrap tape from a bicycle handlebar or hockey stick.

Mark

 

[docholliday64]

https://www.ebay.com/itm/186900168004?_skw=mcculloch+93032&itmmeta=01JKSA69NXQM316KRKK57B8BA9&hash=item2b841e3d44:g:1MUAAOSwJZlnisYB&itmprp=enc:AQAKAAAA8FkggFvd1GGDu0w3yXCmi1fBHY6aFhZ4sv3YrUiw78eTf9QT/5nZeovqEd6USzncPciJWO0DNoRArI24OdPH+K1zabiP4+vtosDGJ4sOy2COxNMuZh/Esgd+GCXxwbFJhTXmH45WNrTm/Vtf8IGoDh8aKLEvDqO9qwHMlhyt+rhRfPd5CGLKThbZ11iGCDeO+m0QLhl4KJeOKlPjCTClFBgD1icpjRx3NfRb6k+r3ASgfuHwnJB0BwvLLvd0dmj6kq08NJX4gZ9wTh5EzW+F/NLTiaAf6B/s4K1a3BXmwdmmPcnfQQc/BneY3d8VwlHeSg==|tkp:Bk9SR5CbmaqeZQ

https://www.ebay.com/itm/186890343753?_skw=mcculloch+93032&itmmeta=01JKSA69NXXQ14RZRK7ZP3KPHY&hash=item2b83885549:g:vAsAAOSwhtRnhGxD&itmprp=enc:AQAKAAAA8FkggFvd1GGDu0w3yXCmi1e2SyrfcOeu6dfCk01/q5LaFZHQ3ZEfxp8BsHDmzh3NXRmGjp/SdrzizJgM0/vtSOVOvqIhZLDZReYTzVQjf8ZTeEHnWxg8CJfMKB6VJVQLFE40U0NjQNtDIDUcUHuLKQMjYH/clj9slpUyJLOW9pOT8OTPPURjvJdv8koxIK9CC2PV8x24E8clg5u+OPpAKXALX9s5ITsDyzn7Gydd0BKM7Abg+o54Gr1ttPqN6muyxWceio6pkUnENHdBtzoM8CZDYH0BkFUzGKvKofp1oVhplXpVKl3jrYxPUBazlLWqLQ==|tkp:Bk9SR5CbmaqeZQ

I have a few "aftermarket" options if you just want a functional piece and don't care if it is 100% original.

View attachment 1241243

The full wrap bars are pretty pricey, even for used ones. If the only thing amiss with yours is the padding, consider stripping it off and using some cushion wrap tape from a bicycle handlebar or hockey stick.

Mark

Thanks Mark - I like those grommets - I don't really care if they are original or not - just need the functionality.
Send me a PM - I'll get some of those from you.
As far as the bar goes, I have some EPDM tubing that I have used on other 10 series saws, a pain to get on (I use compressed air), but seems to work pretty well. I'll probably go that route with the 850.